summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2011-11-04 12:00:48 +0100
committerJean Delvare <khali@endymion.delvare>2011-11-04 12:00:48 +0100
commiteff7687d473c31cba3876c13e97eebc708eb8582 (patch)
tree59f2bcc34e01a7c125a335a45d42010bc66b2dc1 /Documentation/hwmon
parent6ba71de5f81bbf639b5dcea2bc2c33cdb87ed782 (diff)
downloadop-kernel-dev-eff7687d473c31cba3876c13e97eebc708eb8582.zip
op-kernel-dev-eff7687d473c31cba3876c13e97eebc708eb8582.tar.gz
hwmon: (w83627ehf) Add support for the W83627UHG
This is essentially a stripped down version of the W83627DHG. Noticeable difference is that it is still powered with +5V, as older models, even though the ADC resolution is 8 mV as newer models have. Thanks to Ulf Bruman (Saab Group) for doing all the testing. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/w83627ehf28
1 files changed, 15 insertions, 13 deletions
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 76ffef9..3f44dbd 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -14,6 +14,10 @@ Supported chips:
Prefix: 'w83627dhg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83627UHG
+ Prefix: 'w83627uhg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: available from www.nuvoton.com
* Winbond W83667HG
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
@@ -42,14 +46,13 @@ Description
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P, W83667HG, W83667HG-B, W83667HG-I (NCT6775F),
-and NCT6776F super I/O chips. We will refer to them collectively as
-Winbond chips.
-
-The chips implement three temperature sensors (up to four for 667HG-B, and nine
-for NCT6775F and NCT6776F), five fan rotation speed sensors, ten analog voltage
-sensors (only nine for the 627DHG), one VID (6 pins for the 627EHF/EHG, 8 pins
-for the 627DHG and 667HG), alarms with beep warnings (control unimplemented),
+W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
+(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
+as Winbond chips.
+
+The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
+(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are
@@ -86,17 +89,16 @@ follows:
temp1 -> pwm1
temp2 -> pwm2
-temp3 -> pwm3
+temp3 -> pwm3 (not on 627UHG)
prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
supported by the driver)
/sys files
----------
-name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
- for the W83667HG and W83667HG-B it is set to "w83667hg", for NCT6775F it
- is set to "nct6775", and for NCT6776F it is set to "nct6776".
+name - this is a standard hwmon device entry, it contains the name of
+ the device (see the prefix in the list of supported devices at
+ the top of this file)
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
OpenPOWER on IntegriCloud