Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon changes for v3.4 from Guenter Roeck:
 "Mostly cleanup.  No new drivers this time around, but support for
  several chips added to existing drivers: TPS40400, TPS40422, MTD040,
  MAX34446, ZL9101M, ZL9117M, and LM96080.  Also, added watchdog support
  for SCH56xx, and additional attributes for a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits)
  hwmon: (sch56xx) Add support for the integrated watchdog (v2)
  hwmon: (w83627ehf) Add support for temperature offset registers
  hwmon: (jc42) Remove unnecessary device IDs
  hwmon: (zl6100) Add support for ZL9101M and ZL9117M
  hwmon: (adm1275) Add support for ADM1075
  hwmon: (max34440) Add support for MAX34446
  hwmon: (pmbus) Add more virtual registers
  hwmon: (pmbus) Add support for Lineage Power MDT040
  hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
  hwmon: (max34440) Add support for 'lowest' output voltage attribute
  hwmon: (jc42) Convert to use devm_kzalloc
  hwmon: (max16065) Convert to use devm_kzalloc
  hwmon: (smm665) Convert to use devm_kzalloc
  hwmon: (ltc4261) Convert to use devm_kzalloc
  hwmon: (pmbus) Simplify remove functions
  hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
  hwmon: (lineage-pem) Convert to use devm_kzalloc
  hwmon: (hwmon-vid) Fix checkpatch issues
  hwmon: (hwmon-vid) Add new entries to VRM model table
  hwmon: (lm80) Add detection of NatSemi/TI LM96080
  ...

8 files changed, 92 insertions, 41 deletions

diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index e5f982c..2cfa256 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -2,6 +2,10 @@ Kernel driver adm1275
 =====================
 
 Supported chips:
+  * Analog Devices ADM1075
+    Prefix: 'adm1075'
+    Addresses scanned: -
+    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
   * Analog Devices ADM1275
     Prefix: 'adm1275'
     Addresses scanned: -
@@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com>
 Description
 -----------
 
-This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276
-Hot-Swap Controller and Digital Power Monitor.
+This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
+and ADM1276 Hot-Swap Controller and Digital Power Monitor.
 
-ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be
-removed from or inserted into a live backplane. They also feature current and
-voltage readback via an integrated 12-bit analog-to-digital converter (ADC),
-accessed using a PMBus interface.
+ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
+board to be removed from or inserted into a live backplane. They also feature
+current and voltage readback via an integrated 12-bit analog-to-digital
+converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+The ADM1075, unlike many other PMBus devices, does not support internal voltage
+or current scaling. Reported voltages, currents, and power are raw measurements,
+and will typically have to be scaled.
+
 
 Platform data support
 ---------------------
@@ -51,7 +59,8 @@ The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
 in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration.
+			configuration. On ADM1075, vout1 reports the voltage on
+			the VAUX pin.
 in1_input		Measured voltage.
 in1_min			Minimum Voltage.
 in1_max			Maximum voltage.
@@ -74,3 +83,10 @@ curr1_crit		Critical maximum current. Depending on the chip
 curr1_crit_alarm	Critical current high alarm.
 curr1_highest		Historical maximum current.
 curr1_reset_history	Write any value to reset history.
+
+power1_label		"pin1"
+power1_input		Input power.
+power1_reset_history	Write any value to reset history.
+
+			Power attributes are supported on ADM1075 and ADM1276
+			only.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 52729a7..66ecb9f 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -3,71 +3,50 @@ Kernel driver jc42
 
 Supported chips:
   * Analog Devices ADT7408
-    Prefix: 'adt7408'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
   * Atmel AT30TS00
-    Prefix: 'at30ts00'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.atmel.com/Images/doc8585.pdf
   * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
-    Prefix: 'tse2002', 'ts3000'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
 	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
 	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
 	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
-    Prefix: 'max6604'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
   * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
-  * NXP Semiconductors SE97, SE97B
-    Prefix: 'se97'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * NXP Semiconductors SE97, SE97B, SE98, SE98A
     Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE97.pdf
 	http://www.nxp.com/documents/data_sheet/SE97B.pdf
-  * NXP Semiconductors SE98
-    Prefix: 'se98'
-    Addresses scanned: I2C 0x18 - 0x1f
-    Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE98.pdf
+	http://www.nxp.com/documents/data_sheet/SE98A.pdf
   * ON Semiconductor CAT34TS02, CAT6095
-    Prefix: 'cat34ts02', 'cat6095'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheet:
 	http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
 	http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
-  * ST Microelectronics STTS424, STTS424E02
-    Prefix: 'stts424'
-    Addresses scanned: I2C 0x18 - 0x1f
-    Datasheets:
-	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
-	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
-  * ST Microelectronics STTS2002, STTS3000
-    Prefix: 'stts2002', 'stts3000'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS3000
     Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157556.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157558.pdf
 	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
 	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
-    Prefix: 'jc42'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheet:
 	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
+  Common for all chips:
+    Prefix: 'jc42'
+    Addresses scanned: I2C 0x18 - 0x1f
+
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
 
diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80
index cb5b407..a60b43e 100644
--- a/Documentation/hwmon/lm80
+++ b/Documentation/hwmon/lm80
@@ -7,6 +7,11 @@ Supported chips:
     Addresses scanned: I2C 0x28 - 0x2f
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
+  * National Semiconductor LM96080
+    Prefix: 'lm96080'
+    Addresses scanned: I2C 0x28 - 0x2f
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
@@ -17,7 +22,9 @@ Description
 
 This driver implements support for the National Semiconductor LM80.
 It is described as a 'Serial Interface ACPI-Compatible Microprocessor
-System Hardware Monitor'.
+System Hardware Monitor'. The LM96080 is a more recent incarnation,
+it is pin and register compatible, with a few additional features not
+yet supported by the driver.
 
 The LM80 implements one temperature sensor, two fan rotation speed sensors,
 seven voltage sensors, alarms, and some miscellaneous stuff.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 1974391..0448222 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -11,6 +11,11 @@ Supported chips:
     Prefixes: 'max34441'
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+  * Maxim MAX34446
+    PMBus Power-Supply Data Logger
+    Prefixes: 'max34446'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
 
 Author: Guenter Roeck <guenter.roeck@ericsson.com>
 
@@ -19,8 +24,8 @@ Description
 -----------
 
 This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller.
+Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -33,6 +38,13 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+For MAX34446, the value of the currX_crit attribute determines if current or
+voltage measurement is enabled for a given channel. Voltage measurement is
+enabled if currX_crit is set to 0; current measurement is enabled if the
+attribute is set to a positive value. Power measurement is only enabled if
+channel 1 (3) is configured for voltage measurement, and channel 2 (4) is
+configured for current measurement.
+
 
 Platform data support
 ---------------------
@@ -56,19 +68,31 @@ in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
 in[1-6]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
 in[1-6]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+in[1-6]_lowest		Historical minimum voltage.
 in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 
+			MAX34446 only supports in[1-4].
+
 curr[1-6]_label		"iout[1-6]".
 curr[1-6]_input		Measured current. From READ_IOUT register.
 curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
 curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
 curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+curr[1-4]_average	Historical average current (MAX34446 only).
 curr[1-6]_highest	Historical maximum current.
 curr[1-6]_reset_history	Write any value to reset history.
 
 			in6 and curr6 attributes only exist for MAX34440.
+			MAX34446 only supports curr[1-4].
+
+power[1,3]_label	"pout[1,3]"
+power[1,3]_input	Measured power.
+power[1,3]_average	Historical average power.
+power[1,3]_highest	Historical maximum power.
+
+			Power attributes only exist for MAX34446.
 
 temp[1-8]_input		Measured temperatures. From READ_TEMPERATURE_1 register.
 			temp1 is the chip's internal temperature. temp2..temp5
@@ -79,7 +103,9 @@ temp[1-8]_max		Maximum temperature. From OT_WARN_LIMIT register.
 temp[1-8]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
 temp[1-8]_max_alarm	Temperature high alarm.
 temp[1-8]_crit_alarm	Temperature critical high alarm.
+temp[1-8]_average	Historical average temperature (MAX34446 only).
 temp[1-8]_highest	Historical maximum temperature.
 temp[1-8]_reset_history	Write any value to reset history.
 
 			temp7 and temp8 attributes only exist for MAX34440.
+			MAX34446 only supports temp[1-3].
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index d28b591..f90f999 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -15,13 +15,20 @@ Supported chips:
 	http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
 	http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
   * Lineage Power
-    Prefixes: 'pdt003', 'pdt006', 'pdt012', 'udt020'
+    Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
     Addresses scanned: -
     Datasheets:
 	http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
 	http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
 	http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
 	http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
+	http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
+  * Texas Instruments TPS40400, TPS40422
+    Prefixes: 'tps40400', 'tps40422'
+    Addresses scanned: -
+    Datasheets:
+	http://www.ti.com/lit/gpn/tps40400
+	http://www.ti.com/lit/gpn/tps40422
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -
diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627
index 446a054..0551d26 100644
--- a/Documentation/hwmon/sch5627
+++ b/Documentation/hwmon/sch5627
@@ -16,6 +16,11 @@ Description
 SMSC SCH5627 Super I/O chips include complete hardware monitoring
 capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures.
 
+The SMSC SCH5627 hardware monitoring part also contains an integrated
+watchdog. In order for this watchdog to function some motherboard specific
+initialization most be done by the BIOS, so if the watchdog is not enabled
+by the BIOS the sch5627 driver will not register a watchdog device.
+
 The hardware monitoring part of the SMSC SCH5627 is accessed by talking
 through an embedded microcontroller. An application note describing the
 protocol for communicating with the microcontroller is available upon
diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636
index f83bd1c..7b0a01d 100644
--- a/Documentation/hwmon/sch5636
+++ b/Documentation/hwmon/sch5636
@@ -26,6 +26,9 @@ temperatures. Note that the driver detects how many fan headers /
 temperature sensors are actually implemented on the motherboard, so you will
 likely see fewer temperature and fan inputs.
 
+The Fujitsu Theseus hwmon solution also contains an integrated watchdog.
+This watchdog is fully supported by the sch5636 driver.
+
 An application note describing the Theseus' registers, as well as an
 application note describing the protocol for communicating with the
 microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 98ebacb..a995b41 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -34,6 +34,14 @@ Supported chips:
     Prefix: 'zl6105'
     Addresses scanned: -
     Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+  * Intersil / Zilker Labs ZL9101M
+    Prefix: 'zl9101'
+    Addresses scanned: -
+    Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
+  * Intersil / Zilker Labs ZL9117M
+    Prefix: 'zl9117'
+    Addresses scanned: -
+    Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
   * Ericsson BMR450, BMR451
     Prefix: 'bmr450', 'bmr451'
     Addresses scanned: -