diff options
author | Michal Marek <mmarek@suse.cz> | 2010-10-12 15:09:06 +0200 |
---|---|---|
committer | Michal Marek <mmarek@suse.cz> | 2010-10-12 15:09:06 +0200 |
commit | 239060b93bb30a4ad55f1ecaa512464a035cc5ba (patch) | |
tree | 77f79810e57d4fc24356eca0cd6db463e8994128 /Documentation/hwmon/emc2103 | |
parent | 1408b15b98635a13bad2e2a50b3c2ae2ccdf625b (diff) | |
parent | e9203c988234aa512bd45ca32b52e21c7bbfc414 (diff) | |
download | op-kernel-dev-239060b93bb30a4ad55f1ecaa512464a035cc5ba.zip op-kernel-dev-239060b93bb30a4ad55f1ecaa512464a035cc5ba.tar.gz |
Merge branch 'kbuild/rc-fixes' into kbuild/kconfig
We need to revert the temporary hack in 71ebc01, hence the merge.
Diffstat (limited to 'Documentation/hwmon/emc2103')
-rw-r--r-- | Documentation/hwmon/emc2103 | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103 new file mode 100644 index 0000000..a12b2c12 --- /dev/null +++ b/Documentation/hwmon/emc2103 @@ -0,0 +1,33 @@ +Kernel driver emc2103 +====================== + +Supported chips: + * SMSC EMC2103 + Addresses scanned: I2C 0x2e + Prefix: 'emc2103' + Datasheet: Not public + +Authors: + Steve Glendinning <steve.glendinning@smsc.com> + +Description +----------- + +The Standard Microsystems Corporation (SMSC) EMC2103 chips +contain up to 4 temperature sensors and a single fan controller. + +Fan rotation speeds are reported in RPM (rotations per minute). An alarm is +triggered if the rotation speed has dropped below a programmable limit. Fan +readings can be divided by a programmable divider (1, 2, 4 or 8) to give +the readings more range or accuracy. Not all RPM values can accurately be +represented, so some rounding is done. With a divider of 1, the lowest +representable value is 480 RPM. + +This driver supports RPM based control, to use this a fan target +should be written to fan1_target and pwm1_enable should be set to 3. + +The 2103-2 and 2103-4 variants have a third temperature sensor, which can +be connected to two anti-parallel diodes. These values can be read +as temp3 and temp4. If only one diode is attached to this channel, temp4 +will show as "fault". The module parameter "apd=0" can be used to suppress +this 4th channel when anti-parallel diodes are not fitted. |