Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 272 insertions, 0 deletions

diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt
new file mode 100644
index 0000000..fd68b16
--- /dev/null
+++ b/Documentation/fb/intel810.txt
@@ -0,0 +1,272 @@
+Intel 810/815 Framebuffer driver
+ 	Tony Daplas <adaplas@pol.net>
+	http://i810fb.sourceforge.net
+
+	March 17, 2002
+
+	First Released: July 2001
+================================================================
+
+A. Introduction
+	This is a framebuffer driver for various Intel 810/815 compatible
+graphics devices.  These would include:
+
+	Intel 810
+	Intel 810E
+	Intel 810-DC100
+	Intel 815 Internal graphics only, 100Mhz FSB
+	Intel 815 Internal graphics only
+	Intel 815 Internal graphics and AGP
+
+B.  Features
+
+        - Choice of using Discrete Video Timings, VESA Generalized Timing
+	  Formula, or a framebuffer specific database to set the video mode
+
+	- Supports a variable range of horizontal and vertical resolution, and
+	  vertical refresh rates if the VESA Generalized Timing Formula is 
+	  enabled.
+
+        - Supports color depths of 8, 16, 24 and 32 bits per pixel
+
+	- Supports pseudocolor, directcolor, or truecolor visuals
+
+        - Full and optimized hardware acceleration at 8, 16 and 24 bpp
+
+	- Robust video state save and restore
+
+        - MTRR support 
+
+	- Utilizes user-entered monitor specifications to automatically
+	  calculate required video mode parameters.
+
+	- Can concurrently run with xfree86 running with native i810 drivers 
+
+	- Hardware Cursor Support
+ 
+C.  List of available options
+	
+   a. "video=i810fb"  
+	enables the i810 driver
+
+	Recommendation: required
+ 
+   b. "xres:<value>"  
+	select horizontal resolution in pixels
+
+	Recommendation: user preference 
+	(default = 640)
+
+   c. "yres:<value>"
+	select vertical resolution in scanlines. If Discrete Video Timings
+	is enabled, this will be ignored and computed as 3*xres/4.  
+
+	Recommendation: user preference
+	(default = 480)
+		
+   d. "vyres:<value>" 
+	select virtual vertical resolution in scanlines. If (0) or none
+	is specified, this will be computed against maximum available memory. 
+
+	Recommendation: do not set
+	(default = 480)
+
+   e. "vram:<value>"
+	select amount of system RAM in MB to allocate for the video memory 
+
+	Recommendation: 1 - 4 MB.
+	(default = 4)
+
+   f. "bpp:<value>"   
+	select desired pixel depth 
+
+	Recommendation: 8
+	(default = 8)
+
+   g. "hsync1/hsync2:<value>" 
+	select the minimum and maximum Horizontal Sync Frequency of the 
+	monitor in KHz.  If a using a fixed frequency monitor, hsync1 must 
+	be equal to hsync2. 
+
+	Recommendation: check monitor manual for correct values
+	default (29/30)
+
+   h. "vsync1/vsync2:<value>" 
+	select the minimum and maximum Vertical Sync Frequency of the monitor
+	in Hz. You can also use this option to lock your monitor's refresh 
+	rate.
+
+	Recommendation: check monitor manual for correct values
+	(default = 60/60)
+
+	IMPORTANT:  If you need to clamp your timings, try to give some 
+	leeway for computational errors (over/underflows).  Example: if 
+	using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least
+	a 1 unit difference, and vice versa.
+
+   i. "voffset:<value>"	
+        select at what offset in MB of the logical memory to allocate the 
+	framebuffer memory.  The intent is to avoid the memory blocks
+	used by standard graphics applications (XFree86).  The default
+        offset (16 MB for a 64MB aperture, 8 MB for a 32MB aperture) will
+        avoid XFree86's usage and allows up to 7MB/15MB of framebuffer
+        memory.  Depending on your usage, adjust the value up or down, 
+	(0 for maximum usage, 31/63 MB for the least amount).  Note, an 
+	arbitrary setting may conflict with XFree86.
+
+	Recommendation: do not set
+	(default = 8 or 16 MB)
+      
+   j. "accel" 
+	enable text acceleration.  This can be enabled/reenabled anytime 
+	by using 'fbset -accel true/false'. 
+
+	Recommendation: enable
+	(default = not set) 
+
+   k. "mtrr" 
+	enable MTRR.  This allows data transfers to the framebuffer memory
+	to occur in bursts which can significantly increase performance.
+	Not very helpful with the i810/i815 because of 'shared memory'. 
+
+	Recommendation: do not set
+	(default = not set) 
+
+   l. "extvga"
+	if specified, secondary/external VGA output will always be enabled.
+	Useful if the BIOS turns off the VGA port when no monitor is attached.
+	The external VGA monitor can then be attached without rebooting. 
+
+	Recommendation: do not set
+	(default = not set)
+	
+   m. "sync" 
+	Forces the hardware engine to do a "sync" or wait for the hardware
+	to finish before starting another instruction. This will produce a 
+	more stable setup, but will be slower.
+
+	Recommendation: do not set
+	(default = not set)
+
+   n. "dcolor"
+        Use directcolor visual instead of truecolor for pixel depths greater
+	than 8 bpp.  Useful for color tuning, such as gamma control.
+
+	Recommendation: do not set
+	(default = not set)
+			
+D. Kernel booting
+
+Separate each option/option-pair by commas (,) and the option from its value
+with a colon (:) as in the following:
+
+video=i810fb:option1,option2:value2
+
+Sample Usage
+------------
+
+In /etc/lilo.conf, add the line:
+
+append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
+        vsync1:50,vsync2:85,accel,mtrr"
+
+This will initialize the framebuffer to 1024x768 at 8bpp.  The framebuffer
+will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate 
+will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.  
+
+IMPORTANT:
+You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
+better than 640x480 at 60Hz.
+
+E.  Module options
+	
+	The module parameters are essentially similar to the kernel 
+parameters. The main difference is that you need to include a Boolean value 
+(1 for TRUE, and 0 for FALSE) for those options which don't need a value. 
+
+Example, to enable MTRR, include "mtrr=1".
+
+Sample Usage
+------------
+
+Using the same setup as described above, load the module like this:
+
+	modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \
+	         vsync2=85 accel=1 mtrr=1
+
+Or just add the following to /etc/modprobe.conf
+
+	options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \
+	vsync2=85 accel=1 mtrr=1
+
+and just do a 
+
+	modprobe i810fb
+
+
+F.  Setup
+
+	a. Do your usual method of configuring the kernel. 
+	
+	make menuconfig/xconfig/config
+
+	b. Under "Code Maturity Options", enable "Prompt for experimental/
+	   incomplete code/drivers".
+
+ 	c. Enable agpgart support for the Intel 810/815 on-board graphics.
+	   This is required.  The option is under "Character Devices"
+
+	d. Under "Graphics Support", select "Intel 810/815" either statically
+	   or as a module.  Choose "use VESA GTF for video timings"  if you 
+	   need to maximize the capability of your display.  To be on the 
+	   safe side, you can leave this unselected.  
+  
+        e. If you want a framebuffer console, enable it under "Console 
+	   Drivers"
+
+	f. Compile your kernel. 
+	  	
+	g. Load the driver as described in section D and E.
+	
+	Optional:	
+	h.  If you are going to run XFree86 with its native drivers, the 
+	    standard XFree86 4.1.0 and 4.2.0 drivers should work as is.
+            However, there's a bug in the XFree86 i810 drivers.  It attempts 
+	    to use XAA even when switched to the console. This will crash
+	    your server. I have a fix at this site:  
+	    
+	    http://i810fb.sourceforge.net.  
+
+	    You can either use the patch, or just replace 
+	    
+            /usr/X11R6/lib/modules/drivers/i810_drv.o
+
+	    with the one provided at the website. 	
+
+	i.  Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver
+	    patch to see the chipset in action (or inaction :-).
+
+G.  Acknowledgment:
+	
+	1.  Geert Uytterhoeven - his excellent howto and the virtual
+                                 framebuffer driver code made this possible.
+
+	2.  Jeff Hartmann for his agpgart code.  
+
+	3.  The X developers.  Insights were provided just by reading the
+	    XFree86 source code.
+
+	4.  Intel(c).  For this value-oriented chipset driver and for
+            providing documentation.
+
+	5. Matt Sottek.  His inputs and ideas  helped in making some
+	optimizations possible.
+
+H.  Home Page:
+
+	A more complete, and probably updated information is provided at
+http://i810fb.sourceforge.net.
+
+###########################
+Tony
+