Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...

7 files changed, 335 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index e577196..4659fd9 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -47,6 +47,7 @@ The full ID of peripheral types can be found below.
 	20	ASRC
 	21	ESAI
 	22	SSI Dual FIFO	(needs firmware ver >= 2)
+	23	Shared ASRC
 
 The third cell specifies the transfer priority as below.
 
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 0000000..a6511df
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+	is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+	Each channel of this DMA controller has a peripheral request line,
+	the assignment is fixed in hardware. This one cell
+	in dmas property of a client device represents the channel number.
+
+Example:
+
+	dma0: dma@14000 {
+		compatible = "fsl,mpc5121-dma";
+		reg = <0x14000 0x1800>;
+		interrupts = <65 0x8>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
new file mode 100644
index 0000000..d5e2522
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible:	must be one of
+		"renesas,nbpfaxi64dmac1b4"
+		"renesas,nbpfaxi64dmac1b8"
+		"renesas,nbpfaxi64dmac1b16"
+		"renesas,nbpfaxi64dmac4b4"
+		"renesas,nbpfaxi64dmac4b8"
+		"renesas,nbpfaxi64dmac4b16"
+		"renesas,nbpfaxi64dmac8b4"
+		"renesas,nbpfaxi64dmac8b8"
+		"renesas,nbpfaxi64dmac8b16"
+- #dma-cells:	must be 2: the first integer is a terminal number, to which this
+		slave is connected, the second one is flags. Flags is a bitmask
+		with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+	dma: dma-controller@48000000 {
+		compatible = "renesas,nbpfaxi64dmac8b4";
+		reg = <0x48000000 0x400>;
+		interrupts = <0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4
+			      0 16 0x4
+			      0 17 0x4
+			      0 18 0x4
+			      0 19 0x4>;
+		#dma-cells = <2>;
+		dma-channels = <8>;
+		dma-requests = <8>;
+	};
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+		dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+			&dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+		dma-names = "rx", "tx";
diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
new file mode 100644
index 0000000..9f1d750
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
@@ -0,0 +1,29 @@
+* R-Car Audio DMAC peri peri Device Tree bindings
+
+Required properties:
+- compatible:	should be "renesas,rcar-audmapp"
+- #dma-cells:	should be <1>, see "dmas" property below
+
+Example:
+	audmapp: audio-dma-pp@0xec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
+
+* DMA client
+
+Required properties:
+- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+		where SRS/DRS values are fixed handles, specified in the SoC
+		manual as the value that would be written into the PDMACHCR.
+- dma-names:	a list of DMA channel names, one per "dmas" entry
+
+Example:
+
+	dmas = <&audmapp 0x2d00
+		&audmapp 0x3700>;
+	dma-names =  "src0_ssiu0",
+		     "dvc0_ssiu0";
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
new file mode 100644
index 0000000..df0f48b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -0,0 +1,98 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
+called MID/RID.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+  interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+  channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+  connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index 1f5729f..95800ab 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -35,9 +35,11 @@ Required properties:
 
 Each dmas request consists of 4 cells:
   1. A phandle pointing to the DMA controller
-  2. Device Type
+  2. Device signal number, the signal line for single and burst requests
+     connected from the device to the DMA40 engine
   3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
+  4. A 32bit mask specifying; mode, direction and endianness
+     [NB: This list will grow]
         0x00000001: Mode:
                 Logical channel when unset
                 Physical channel when set
@@ -54,6 +56,74 @@ Each dmas request consists of 4 cells:
                 Normal priority when unset
                 High priority when set
 
+Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
+bidirectional, i.e. the same for RX and TX operations:
+
+0:  SPI controller 0
+1:  SD/MMC controller 0 (unused)
+2:  SD/MMC controller 1 (unused)
+3:  SD/MMC controller 2 (unused)
+4:  I2C port 1
+5:  I2C port 3
+6:  I2C port 2
+7:  I2C port 4
+8:  Synchronous Serial Port SSP0
+9:  Synchronous Serial Port SSP1
+10: Multi-Channel Display Engine MCDE RX
+11: UART port 2
+12: UART port 1
+13: UART port 0
+14: Multirate Serial Port MSP2
+15: I2C port 0
+16: USB OTG in/out endpoints 7 & 15
+17: USB OTG in/out endpoints 6 & 14
+18: USB OTG in/out endpoints 5 & 13
+19: USB OTG in/out endpoints 4 & 12
+20: SLIMbus or HSI channel 0
+21: SLIMbus or HSI channel 1
+22: SLIMbus or HSI channel 2
+23: SLIMbus or HSI channel 3
+24: Multimedia DSP SXA0
+25: Multimedia DSP SXA1
+26: Multimedia DSP SXA2
+27: Multimedia DSP SXA3
+28: SD/MM controller 2
+29: SD/MM controller 0
+30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+31: MSP port 0 or SLIMbus channel 0
+32: SD/MM controller 1
+33: SPI controller 2
+34: i2c3 RX2 TX2
+35: SPI controller 1
+36: USB OTG in/out endpoints 3 & 11
+37: USB OTG in/out endpoints 2 & 10
+38: USB OTG in/out endpoints 1 & 9
+39: USB OTG in/out endpoints 8
+40: SPI controller 3
+41: SD/MM controller 3
+42: SD/MM controller 4
+43: SD/MM controller 5
+44: Multimedia DSP SXA4
+45: Multimedia DSP SXA5
+46: SLIMbus channel 8 or Multimedia DSP SXA6
+47: SLIMbus channel 9 or Multimedia DSP SXA7
+48: Crypto Accelerator 1
+49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+50: Hash Accelerator 1 TX
+51: memcpy TX (to be used by the DMA driver for memcpy operations)
+52: SLIMbus or HSI channel 4
+53: SLIMbus or HSI channel 5
+54: SLIMbus or HSI channel 6
+55: SLIMbus or HSI channel 7
+56: memcpy (to be used by the DMA driver for memcpy operations)
+57: memcpy (to be used by the DMA driver for memcpy operations)
+58: memcpy (to be used by the DMA driver for memcpy operations)
+59: memcpy (to be used by the DMA driver for memcpy operations)
+60: memcpy (to be used by the DMA driver for memcpy operations)
+61: Crypto Accelerator 0
+62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+63: Hash Accelerator 0 TX
+
 Example:
 
 	uart@80120000 {
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
new file mode 100644
index 0000000..3e145c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible:	Must be "allwinner,sun6i-a31-dma"
+- reg:		Should contain the registers base address and length
+- interrupts:	Should contain a reference to the interrupt used by this device
+- clocks:	Should contain a reference to the parent AHB clock
+- resets:	Should contain a reference to the reset controller asserting
+		this device in reset
+- #dma-cells :	Should be 1, a single cell holding a line request number
+
+Example:
+	dma: dma-controller@01c02000 {
+		compatible = "allwinner,sun6i-a31-dma";
+		reg = <0x01c02000 0x1000>;
+		interrupts = <0 50 4>;
+		clocks = <&ahb1_gates 6>;
+		resets = <&ahb1_rst 6>;
+		#dma-cells = <1>;
+	};
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+	compatible = "allwinner,sun6i-a31-spi";
+	reg = <0x01c6a000 0x1000>;
+	interrupts = <0 67 4>;
+	clocks = <&ahb1_gates 22>, <&spi2_clk>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 25>, <&dma 25>;
+	dma-names = "rx", "tx";
+	resets = <&ahb1_rst 22>;
+};