Merge branch '3.15/dss-dt' into 3.15/fbdev

Merge OMAP DSS DT support

20 files changed, 820 insertions, 6 deletions

diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX
index b78f691..8c4102c 100644
--- a/Documentation/devicetree/00-INDEX
+++ b/Documentation/devicetree/00-INDEX
@@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
 	- this file
 booting-without-of.txt
 	- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+	- How Linux uses DT and what DT aims to solve.
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 34dc40c..af9b4a0 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -91,7 +91,7 @@ Boards:
   compatible = "ti,omap3-beagle", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
index 0a85c70..07ad020 100644
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -13,6 +13,9 @@ Required properties:
 - #address-cells: should be one. The cell is the slot id.
 - #size-cells: should be zero.
 - at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.
 
 The node contains child nodes for each slot that the platform uses
 
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
 	interrupts = <12 4>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;
 
 	[ child node definitions...]
 };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
index b90bfcd..863d5b81 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@@ -1,7 +1,8 @@
 * Allwinner EMAC ethernet controller
 
 Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+              "allwinner,sun4i-emac")
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: A phandle to a phy node defining the PHY address (as the reg
@@ -14,7 +15,7 @@ Optional properties:
 Example:
 
 emac: ethernet@01c0b000 {
-       compatible = "allwinner,sun4i-emac";
+       compatible = "allwinner,sun4i-a10-emac";
        reg = <0x01c0b000 0x1000>;
        interrupts = <55>;
        clocks = <&ahb_gates 17>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
index 00b9f9a..4ec5641 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@@ -1,7 +1,8 @@
 * Allwinner A10 MDIO Ethernet Controller interface
 
 Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+              (Deprecated: "allwinner,sun4i-mdio").
 - reg: address and length of the register set for the device.
 
 Optional properties:
@@ -9,7 +10,7 @@ Optional properties:
 
 Example at the SoC level:
 mdio@01c0b080 {
-	compatible = "allwinner,sun4i-mdio";
+	compatible = "allwinner,sun4i-a10-mdio";
 	reg = <0x01c0b080 0x14>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 0000000..3dd3d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+   "st,stid127-dwmac".
+ - reg		: Offset of the glue configuration register map in system
+   configuration regmap pointed by st,syscon property and size.
+
+ - reg-names	: Should be "sti-ethconf".
+
+ - st,syscon	: Should be phandle to system configuration node which
+   encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+   wired up in from different sources. One via TXCLK pin and other via CLK_125
+   pin. This wiring is totally board dependent. However the retiming glue
+   logic should be configured accordingly. Possible values for this property
+
+	   "txclk" - if 125Mhz clock is wired up via txclk line.
+	   "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+   This property is only valid for Giga bit setup( GMII, RGMII), and it is
+   un-used for non-giga bit (MII and RMII) setups. Also note that internal
+   clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+  for tx and rx. This property is only valid for RMII case where the clock can
+  be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+	device_type 	= "network";
+	compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
+	reg-names	= "stmmaceth", "sti-ethconf";
+	interrupts	= <0 133 0>, <0 134 0>, <0 135 0>;
+	interrupt-names	= "macirq", "eth_wake_irq", "eth_lpi";
+	phy-mode	= "mii";
+
+	st,syscon	= <&syscfg_rear>;
+
+	snps,pbl 	= <32>;
+	snps,mixed-burst;
+
+	resets		= <&softreset STIH416_ETH0_SOFTRESET>;
+	reset-names	= "stmmaceth";
+	pinctrl-0	= <&pinctrl_mii0>;
+	pinctrl-names 	= "default";
+	clocks		= <&CLK_S_GMAC0_PHY>;
+	clock-names	= "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 0000000..d0327f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+	Required elements: "spi_clk"
+- clocks: phandles to input clocks.
 
 Example:
 
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
 	interrupts = <13 4 5>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&spi1_clk>;
+	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
 	status = "okay";
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd..40ce2df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 ak	Asahi Kasei Corp.
+allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amstaos	AMS-Taos Inc.
@@ -40,6 +41,7 @@ gmt	Global Mixed-mode Technology, Inc.
 gumstix	Gumstix, Inc.
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+honeywell	Honeywell
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -55,6 +57,7 @@ maxim	Maxim Integrated Products
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.
 national	National Semiconductor
+neonode		Neonode Inc.
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
@@ -64,7 +67,7 @@ phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
-qcom	Qualcomm, Inc.
+qcom	Qualcomm Technologies, Inc
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
@@ -78,6 +81,7 @@ silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
+spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
new file mode 100644
index 0000000..0218fcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
@@ -0,0 +1,25 @@
+Analog TV Connector
+===================
+
+Required properties:
+- compatible: "composite-connector" or "svideo-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for TV input
+
+Example
+-------
+
+tv: connector {
+	compatible = "composite-connector";
+	label = "tv";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&venc_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt
new file mode 100644
index 0000000..fc53f7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dvi-connector.txt
@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector@0 {
+	compatible = "dvi-connector";
+	label = "dvi";
+
+	digital;
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		dvi_connector_in: endpoint {
+			remote-endpoint = <&tfp410_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
new file mode 100644
index 0000000..ccccc19
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
@@ -0,0 +1,28 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+- type: the HDMI connector type: "a", "b", "c", "d" or "e"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector@1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	type = "a";
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&tpd12s015_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
new file mode 100644
index 0000000..dce48eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
@@ -0,0 +1,29 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/Documentation/devicetree/bindings/video/sony,acx565akm.txt
new file mode 100644
index 0000000..e123332
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sony,acx565akm.txt
@@ -0,0 +1,30 @@
+Sony ACX565AKM SDI Panel
+========================
+
+Required properties:
+- compatible: "sony,acx565akm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+
+Required nodes:
+- Video port for SDI input
+
+Example
+-------
+
+acx565akm@2 {
+	compatible = "sony,acx565akm";
+	spi-max-frequency = <6000000>;
+	reg = <2>;
+
+	label = "lcd";
+	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&sdi_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/Documentation/devicetree/bindings/video/ti,omap-dss.txt
new file mode 100644
index 0000000..d5f1a3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap-dss.txt
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/video/video-
+ports.txt, and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+	compatible = "ti,omap4-dss";
+	reg = <0x58000000 0x80>;
+	status = "disabled";
+	ti,hwmods = "dss_core";
+	clocks = <&dss_dss_clk>;
+	clock-names = "fck";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	dispc@58001000 {
+		compatible = "ti,omap4-dispc";
+		reg = <0x58001000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "dss_dispc";
+		clocks = <&dss_dss_clk>;
+		clock-names = "fck";
+	};
+
+	hdmi: encoder@58006000 {
+		compatible = "ti,omap4-hdmi";
+		reg = <0x58006000 0x200>,
+		      <0x58006200 0x100>,
+		      <0x58006300 0x100>,
+		      <0x58006400 0x1000>;
+		reg-names = "wp", "pll", "phy", "core";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		ti,hwmods = "dss_hdmi";
+		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+		clock-names = "fck", "sys_clk";
+	};
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/ti,omap2-dss.txt b/Documentation/devicetree/bindings/video/ti,omap2-dss.txt
new file mode 100644
index 0000000..fa8bb2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap2-dss.txt
@@ -0,0 +1,54 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
diff --git a/Documentation/devicetree/bindings/video/ti,omap3-dss.txt b/Documentation/devicetree/bindings/video/ti,omap3-dss.txt
new file mode 100644
index 0000000..0023fa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap3-dss.txt
@@ -0,0 +1,83 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+	- Port 0: DPI output
+	- Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
diff --git a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
new file mode 100644
index 0000000..f85d6fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
@@ -0,0 +1,111 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt
new file mode 100644
index 0000000..2cbe32a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt
@@ -0,0 +1,41 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+
+Required nodes:
+- Video port 0 for DPI input
+- Video port 1 for DVI output
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/video/ti,tpd12s015.txt b/Documentation/devicetree/bindings/video/ti,tpd12s015.txt
new file mode 100644
index 0000000..26e6d32
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,tpd12s015.txt
@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+	compatible = "ti,tpd12s015";
+
+	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tpd12s015_in: endpoint@0 {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tpd12s015_out: endpoint@0 {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};