summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorJamie Lentin <jm@lentin.co.uk>2012-03-27 22:54:15 +0100
committerGrant Likely <grant.likely@secretlab.ca>2012-03-28 17:07:30 -0600
commit83619ea08e9abe0f5ebcfc569a829d1105a1685e (patch)
treeae0f5b603d7055b6d300c3227466001b60e48502 /Documentation/devicetree
parent735e941caa9a35f933297af0ab1e0ad6447411c4 (diff)
downloadop-kernel-dev-83619ea08e9abe0f5ebcfc569a829d1105a1685e.zip
op-kernel-dev-83619ea08e9abe0f5ebcfc569a829d1105a1685e.tar.gz
mtd: Move fdt partition documentation to a seperate file
Partitions are described in the same way for all mtd devices when using devicetree, move the documentation to a separate file and add references to it. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/mtd/arm-versatile.txt4
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-dataflash.txt3
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt4
-rw-r--r--Documentation/devicetree/bindings/mtd/gpio-control-nand.txt3
-rw-r--r--Documentation/devicetree/bindings/mtd/mtd-physmap.txt23
-rw-r--r--Documentation/devicetree/bindings/mtd/partition.txt38
6 files changed, 52 insertions, 23 deletions
diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
index 476845d..beace4b 100644
--- a/Documentation/devicetree/bindings/mtd/arm-versatile.txt
+++ b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
@@ -4,5 +4,5 @@ Required properties:
- compatible : must be "arm,versatile-flash";
- bank-width : width in bytes of flash interface.
-Optional properties:
-- Subnode partition map from mtd flash binding
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
index ef66ddd..1889a4d 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
@@ -3,6 +3,9 @@
Required properties:
- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
Example:
flash@1 {
diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
index 00f1f54..fce4894 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -19,6 +19,10 @@ Optional properties:
read registers (tR). Required if property "gpios" is not used
(R/B# pins not connected).
+Each flash chip described may optionally contain additional sub-nodes
+describing partitions of the address space. See partition.txt for more
+detail.
+
Examples:
upm@1,0 {
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
index 719f4dc..36ef07d 100644
--- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -25,6 +25,9 @@ Optional properties:
GPIO state and before and after command byte writes, this register will be
read to ensure that the GPIO accesses have completed.
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
Examples:
gpio-nand@1,0 {
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index 80152cb..a63c2bd7 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -23,27 +23,8 @@ are defined:
- vendor-id : Contains the flash chip's vendor id (1 byte).
- device-id : Contains the flash chip's device id (1 byte).
-In addition to the information on the mtd bank itself, the
-device tree may optionally contain additional information
-describing partitions of the address space. This can be
-used on platforms which have strong conventions about which
-portions of a flash are used for what purposes, but which don't
-use an on-flash partition table such as RedBoot.
-
-Each partition is represented as a sub-node of the mtd device.
-Each node's name represents the name of the corresponding
-partition of the mtd device.
-
-Flash partitions
- - reg : The partition's offset and size within the mtd bank.
- - label : (optional) The label / name for this partition.
- If omitted, the label is taken from the node name (excluding
- the unit address).
- - read-only : (optional) This parameter, if present, is a hint to
- Linux that this partition should only be mounted
- read-only. This is usually used for flash partitions
- containing early-boot firmware images or data which should not
- be clobbered.
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
Example:
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
new file mode 100644
index 0000000..f114ce1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -0,0 +1,38 @@
+Representing flash partitions in devicetree
+
+Partitions can be represented by sub-nodes of an mtd device. This can be used
+on platforms which have strong conventions about which portions of a flash are
+used for what purposes, but which don't use an on-flash partition table such
+as RedBoot.
+
+#address-cells & #size-cells must both be present in the mtd device and be
+equal to 1.
+
+Required properties:
+- reg : The partition's offset and size within the mtd bank.
+
+Optional properties:
+- label : The label / name for this partition. If omitted, the label is taken
+ from the node name (excluding the unit address).
+- read-only : This parameter, if present, is a hint to Linux that this
+ partition should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should not be
+ clobbered.
+
+Examples:
+
+
+flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ uimage@100000 {
+ reg = <0x0100000 0x200000>;
+ };
+];
OpenPOWER on IntegriCloud