Merge remote-tracking branch 'clk/clk-next' into clk-next

11 files changed, 270 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
new file mode 100644
index 0000000..936166f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -0,0 +1,23 @@
+Mediatek apmixedsys controller
+==============================
+
+The Mediatek apmixedsys controller provides the PLLs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8135-apmixedsys"
+	- "mediatek,mt8173-apmixedsys"
+- #clock-cells: Must be 1
+
+The apmixedsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+apmixedsys: clock-controller@10209000 {
+	compatible = "mediatek,mt8173-apmixedsys";
+	reg = <0 0x10209000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
new file mode 100644
index 0000000..f6cd3e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -0,0 +1,30 @@
+Mediatek infracfg controller
+============================
+
+The Mediatek infracfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8135-infracfg", "syscon"
+	- "mediatek,mt8173-infracfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The infracfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+infracfg: power-controller@10001000 {
+	compatible = "mediatek,mt8173-infracfg", "syscon";
+	reg = <0 0x10001000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
new file mode 100644
index 0000000..f25b854
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -0,0 +1,30 @@
+Mediatek pericfg controller
+===========================
+
+The Mediatek pericfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8135-pericfg", "syscon"
+	- "mediatek,mt8173-pericfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The pericfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+pericfg: power-controller@10003000 {
+	compatible = "mediatek,mt8173-pericfg", "syscon";
+	reg = <0 0x10003000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
new file mode 100644
index 0000000..f9e9179
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -0,0 +1,23 @@
+Mediatek topckgen controller
+============================
+
+The Mediatek topckgen controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8135-topckgen"
+	- "mediatek,mt8173-topckgen"
+- #clock-cells: Must be 1
+
+The topckgen controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+topckgen: power-controller@10000000 {
+	compatible = "mediatek,mt8173-topckgen";
+	reg = <0 0x10000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 0000000..2b7b3fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,40 @@
+* Amlogic Meson8b Clock and Reset Unit
+
+The Amlogic Meson8b clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,meson8b-clkc"
+- reg: it must be composed by two tuples:
+	0) physical base address of the xtal register and length of memory
+	   mapped region.
+	1) physical base address of the clock controller and length of memory
+	   mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Example: Clock controller node:
+
+	clkc: clock-controller@c1104000 {
+		#clock-cells = <1>;
+		compatible = "amlogic,meson8b-clkc";
+		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+	};
+
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart_AO: serial@c81004c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0xc81004c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc CLKID_CLK81>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 06fc6d5..2ec489e 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -138,9 +138,10 @@ Some platforms may require initial configuration of default parent clocks
 and clock frequencies. Such a configuration can be specified in a device tree
 node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
 properties. The assigned-clock-parents property should contain a list of parent
-clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
-property the list of assigned clock frequency values - corresponding to clocks
-listed in the assigned-clocks property.
+clocks in the form of a phandle and clock specifier pair and the
+assigned-clock-rates property should contain a list of frequencies in Hz. Both
+these properties should correspond to the clocks listed in the assigned-clocks
+property.
 
 To skip setting parent or rate of a clock its corresponding entry should be
 set to 0, or can be omitted if it is not followed by any non-zero entry.
diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
new file mode 100644
index 0000000..54d6d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
@@ -0,0 +1,55 @@
+* Clock and reset bindings for CSR atlas7
+
+Required properties:
+- compatible: Should be "sirf,atlas7-car"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- #reset-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
+
+The reset consumer should specify the desired reset by having the reset
+ID in its "reset" phandle cell.
+The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
+
+Examples: Clock and reset controller node:
+
+car: clock-controller@18620000 {
+	compatible = "sirf,atlas7-car";
+	reg = <0x18620000 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
+
+Examples: Consumers using clock or reset:
+
+timer@10dc0000 {
+	compatible = "sirf,macro-tick";
+	reg = <0x10dc0000 0x1000>;
+	clocks = <&car 54>;
+	interrupts = <0 0 0>,
+		   <0 1 0>,
+		   <0 2 0>,
+		   <0 49 0>,
+		   <0 50 0>,
+		   <0 51 0>;
+};
+
+uart1: uart@18020000 {
+	cell-index = <1>;
+	compatible = "sirf,macro-uart";
+	reg = <0x18020000 0x1000>;
+	clocks = <&clks 95>;
+	interrupts = <0 18 0>;
+	fifosize = <32>;
+};
+
+vpp@13110000 {
+	compatible = "sirf,prima2-vpp";
+	reg = <0x13110000 0x10000>;
+	interrupts = <0 31 0>;
+	clocks = <&car 85>;
+	resets = <&car 29>;
+};
diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
index 60bbb1a..268ca61 100644
--- a/Documentation/devicetree/bindings/clock/emev2-clock.txt
+++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt
@@ -52,7 +52,7 @@ usia_u0_sclk: usia_u0_sclk {
 
 Example of consumer:
 
-uart@e1020000 {
+serial@e1020000 {
 	compatible = "renesas,em-uart";
 	reg = <0xe1020000 0x38>;
 	interrupts = <0 8 0>;
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
new file mode 100644
index 0000000..809c5a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
@@ -0,0 +1,21 @@
+* Marvell PXA1928 Clock Controllers
+
+The PXA1928 clock subsystem generates and supplies clock to various
+controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller
+blocks called APMU, MPMU, and APBC roughly corresponding to internal buses.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa1928-apmu" - APMU controller compatible
+  - "marvell,pxa1928-mpmu" - MPMU controller compatible
+  - "marvell,pxa1928-apbc" - APBC controller compatible
+- reg: physical base address of the clock controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use the clock controller
+phandle and this identifier to specify the clock which they consume.
+
+All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>.
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 31c7c0c..660e649 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -19,6 +19,7 @@ ID	Clock	Peripheral
 9	pex1	PCIe Cntrl 1
 15	sata0	SATA Host 0
 17	sdio	SDHCI Host
+23	crypto	CESA (crypto engine)
 25	tdm	Time Division Mplx
 28	ddr	DDR Cntrl
 30	sata1	SATA Host 0
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
new file mode 100644
index 0000000..4c7669a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -0,0 +1,42 @@
+Binding for TO CDCE925 programmable I2C clock synthesizers.
+
+Reference
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] http://www.ti.com/product/cdce925
+
+The driver provides clock sources for each output Y1 through Y5.
+
+Required properties:
+ - compatible: Shall be "ti,cdce925"
+ - reg: I2C device address.
+ - clocks: Points to a fixed parent clock that provides the input frequency.
+ - #clock-cells: From common clock bindings: Shall be 1.
+
+Optional properties:
+ - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
+                 board, or to compensate for external influences.
+
+For both PLL1 and PLL2 an optional child node can be used to specify spread
+spectrum clocking parameters for a board.
+  - spread-spectrum: SSC mode as defined in the data sheet.
+  - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
+    present, the clock runs at the requested frequency on average. Otherwise
+    the requested frequency is the maximum value of the SCC range.
+
+
+Example:
+
+	clockgen: cdce925pw@64 {
+		compatible = "cdce925";
+		reg = <0x64>;
+		clocks = <&xtal_27Mhz>;
+		#clock-cells = <1>;
+		xtal-load-pf = <5>;
+		/* PLL options to get SSC 1% centered */
+		PLL2 {
+			spread-spectrum = <4>;
+			spread-spectrum-center;
+		};
+	};