powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards

Standarize and document the FPGA nodes used on Freescale QorIQ reference
boards.  There are different kinds of FPGAs used on the boards, but
only two are currently standard: "pixis", "ngpixis", and "qixis".  Although
there are minor differences among the boards that have one kind of FPGA, most
of the functionality is the same, so it makes sense to create common
compatibility strings.

We also need to update the P1022DS platform file, because the compatible
string for its PIXIS node has changed.  This means that older kernels are
not compatible with newer device trees.  This is not a real problem, however,
since that particular function doesn't work anyway.  When the DIU is active,
the PIXIS is in "indirect mode", and so cannot be accessed as a memory-mapped
device.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 18 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 39e9415..380914e 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
 * Board Control and Status (BCSR)
 
 Required properties:
@@ -12,25 +17,26 @@ Example:
 		reg = <f8000000 8000>;
 	};
 
-* Freescale on board FPGA
+* Freescale on-board FPGA
 
 This is the memory-mapped registers for on board FPGA.
 
 Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
-  set.
+- compatible: should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
 - interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
 
-Example (MPC8610HPCD):
+Example (P1022DS):
 
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-		interrupt-parent = <&mpic>;
-		interrupts = <8 8>;
-	};
+	 board-control@3,0 {
+		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		 reg = <3 0 0x30>;
+		 interrupt-parent = <&mpic>;
+		 interrupts = <8 8 0 0>;
+	 };
 
 * Freescale BCSR GPIO banks