Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Been a bit busy, first week of kids school, and waiting on other trees
  to go in before I could send this, so its a bit later than I'd
  normally like.

  Highlights:
   - core:
      timestamp fixes, lots of misc cleanups
   - new drivers:
      bochs virtual vga
   - vmwgfx:
      major overhaul for their nextgen virt gpu.
   - i915:
      runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
      bdw is no longer prelim.
   - nouveau:
      gk110/208 acceleration, more pm groundwork, old overlay support
   - radeon:
      dpm rework and clockgating for CIK, pci config reset, big endian
      fixes
   - tegra:
      panel support and DSI support, build as module, prime.
   - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
      fixes
   - msm:
      hdmi support for mdp5"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
  drm/nouveau: resume display if any later suspend bits fail
  drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
  drm/nouveau: implement hooks for needed for drm vblank timestamping support
  drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
  drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
  drm/radeon/dce8: workaround for atom BlankCrtc table
  drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
  drm/radeon: set si_notify_smc_display_change properly
  drm/radeon: fix DAC interrupt handling on DCE5+
  drm/radeon: clean up active vram sizing
  drm/radeon: skip async dma init on r6xx
  drm/radeon/runpm: don't runtime suspend non-PX cards
  drm/radeon: add ring to fence trace functions
  drm/radeon: add missing trace point
  drm/radeon: fix VMID use tracking
  drm: ast,cirrus,mgag200: use drm_can_sleep
  drm/gma500: Lock struct_mutex around cursor updates
  drm/i915: Fix the offset issue for the stolen GEM objects
  DRM: armada: fix missing DRM_KMS_FB_HELPER select
  drm/i915: Decouple GPU error reporting from ring initialisation
  ...

9 files changed, 212 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index ab45c02..efaeec8 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -118,6 +118,9 @@ of the following host1x client modules:
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - dc
+  - nvidia,head: The number of the display controller head. This is used to
+    setup the various types of output to receive video data from the given
+    head.
 
   Each display controller node has a child node, named "rgb", that represents
   the RGB output associated with the controller. It can take the following
@@ -125,6 +128,7 @@ of the following host1x client modules:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
 
 - hdmi: High Definition Multimedia Interface
 
@@ -149,6 +153,7 @@ of the following host1x client modules:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
 
 - tvo: TV encoder output
 
@@ -169,11 +174,21 @@ of the following host1x client modules:
   - clock-names: Must include the following entries:
     - dsi
       This MUST be the first entry.
+    - lp
     - parent
   - resets: Must contain an entry for each entry in reset-names.
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - dsi
+  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
+    which pads are used by this DSI output and need to be calibrated. See also
+    ../mipi/nvidia,tegra114-mipi.txt.
+
+  Optional properties:
+  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+  - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
 
 Example:
 
@@ -253,7 +268,7 @@ Example:
 			interrupts = <0 73 0x04>;
 			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
 				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "disp1", "parent";
+			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -268,7 +283,7 @@ Example:
 			interrupts = <0 74 0x04>;
 			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
 				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "disp2", "parent";
+			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
diff --git a/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
new file mode 100644
index 0000000..973c272
--- /dev/null
+++ b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
@@ -0,0 +1,98 @@
+MIPI DSI (Display Serial Interface) busses
+==========================================
+
+The MIPI Display Serial Interface specifies a serial bus and a protocol for
+communication between a host and up to four peripherals. This document will
+define the syntax used to represent a DSI bus in a device tree.
+
+This document describes DSI bus-specific properties only or defines existing
+standard properties in the context of the DSI bus.
+
+Each DSI host provides a DSI bus. The DSI host controller's node contains a
+set of properties that characterize the bus. Child nodes describe individual
+peripherals on that bus.
+
+The following assumes that only a single peripheral is connected to a DSI
+host. Experience shows that this is true for the large majority of setups.
+
+DSI host
+--------
+
+In addition to the standard properties and those defined by the parent bus of
+a DSI host, the following properties apply to a node representing a DSI host.
+
+Required properties:
+- #address-cells: The number of cells required to represent an address on the
+  bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
+  a maximum of 4 devices can be addressed on a single bus. Hence the value of
+  this property should be 1.
+- #size-cells: Should be 0. There are cases where it makes sense to use a
+  different value here. See below.
+
+DSI peripheral
+--------------
+
+Peripherals are represented as child nodes of the DSI host's node. Properties
+described here apply to all DSI peripherals, but individual bindings may want
+to define additional, device-specific properties.
+
+Required properties:
+- reg: The virtual channel number of a DSI peripheral. Must be in the range
+  from 0 to 3.
+
+Some DSI peripherals respond to more than a single virtual channel. In that
+case two alternative representations can be chosen:
+- The reg property can take multiple entries, one for each virtual channel
+  that the peripheral responds to.
+- If the virtual channels that a peripheral responds to are consecutive, the
+  #size-cells can be set to 1. The first cell of each entry in the reg
+  property is the number of the first virtual channel and the second cell is
+  the number of consecutive virtual channels.
+
+Example
+-------
+
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* peripheral responds to virtual channel 0 */
+		peripheral@0 {
+			compatible = "...";
+			reg = <0>;
+		};
+
+		...
+	};
+
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* peripheral responds to virtual channels 0 and 2 */
+		peripheral@0 {
+			compatible = "...";
+			reg = <0, 2>;
+		};
+
+		...
+	};
+
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* peripheral responds to virtual channels 1, 2 and 3 */
+		peripheral@1 {
+			compatible = "...";
+			reg = <1 3>;
+		};
+
+		...
+	};
diff --git a/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
new file mode 100644
index 0000000..e4a25ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
@@ -0,0 +1,41 @@
+NVIDIA Tegra MIPI pad calibration controller
+
+Required properties:
+- compatible: "nvidia,tegra<chip>-mipi"
+- reg: Physical base address and length of the controller's registers.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - mipi-cal
+- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
+  that need to be calibrated for a given device.
+
+User nodes need to contain an nvidia,mipi-calibrate property that has a
+phandle to refer to the calibration controller node and a bitmask of the pads
+that need to be calibrated.
+
+Example:
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra114-mipi";
+		reg = <0x700e3000 0x100>;
+		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	...
+
+	host1x@50000000 {
+		...
+
+		dsi@54300000 {
+			...
+
+			nvidia,mipi-calibrate = <&mipi 0x060>;
+
+			...
+		};
+
+		...
+	};
diff --git a/Documentation/devicetree/bindings/panel/auo,b101aw03.txt b/Documentation/devicetree/bindings/panel/auo,b101aw03.txt
new file mode 100644
index 0000000..72e088a
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b101aw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101aw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt b/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt
new file mode 100644
index 0000000..f24614e
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wa01a"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt b/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt
new file mode 100644
index 0000000..0ab2c05
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wb03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt b/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt
new file mode 100644
index 0000000..d328b03
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt
@@ -0,0 +1,7 @@
+Panasonic Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f004b00"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt b/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt
new file mode 100644
index 0000000..ef522c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt
@@ -0,0 +1,7 @@
+Samsung Electronics 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "samsung,ltn101nt05"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/simple-panel.txt b/Documentation/devicetree/bindings/panel/simple-panel.txt
new file mode 100644
index 0000000..1341bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/simple-panel.txt
@@ -0,0 +1,21 @@
+Simple display panel
+
+Required properties:
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	panel: panel {
+		compatible = "cptt,claa101wb01";
+		ddc-i2c-bus = <&panelddc>;
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio 90 0>;
+
+		backlight = <&backlight>;
+	};