summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-07-01 19:22:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-07-01 19:22:00 -0700
commit5f1201d515819e7cfaaac3f0a30ff7b556261386 (patch)
treea725fdd6d98bcf7a3aa0fbcac6c3f1510e539be0 /Documentation/devicetree
parent13d45f79a2af84de9083310db58b309a61065208 (diff)
parent358bdf892f6bfacf20884b54a35ab038321f06f9 (diff)
downloadop-kernel-dev-5f1201d515819e7cfaaac3f0a30ff7b556261386.zip
op-kernel-dev-5f1201d515819e7cfaaac3f0a30ff7b556261386.tar.gz
Merge tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clock framework updates from Michael Turquette: "The changes to the common clock framework for 4.2 are dominated by new drivers and updates to existing ones, as usual. There are some fixes to the framework itself and several cleanups for sparse warnings, etc" * tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits) clk: stm32: Add clock driver for STM32F4[23]xxx devices dt-bindings: Document the STM32F4 clock bindings cpufreq: exynos: remove Exynos4210 specific cpufreq driver support ARM: Exynos: switch to using generic cpufreq driver for Exynos4210 clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock clk: samsung: add infrastructure to register cpu clocks clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support doc: dt: add documentation for lpc1850-ccu clk driver clk: add lpc18xx ccu clk driver doc: dt: add documentation for lpc1850-cgu clk driver clk: add lpc18xx cgu clk driver clk: keystone: add support for post divider register for main pll clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED clk: cygnus: remove Cygnus dummy clock binding clk: cygnus: add clock support for Broadcom Cygnus clk: Change bcm clocks build dependency clk: iproc: add initial common clock support clk: iproc: define Broadcom iProc clock binding MAINTAINERS: update email for Michael Turquette clk: meson: add some error handling in meson_clk_register_cpu() ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt23
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt30
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt30
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt40
-rw-r--r--Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt132
-rw-r--r--Documentation/devicetree/bindings/clock/clock-bindings.txt7
-rw-r--r--Documentation/devicetree/bindings/clock/csr,atlas7-car.txt55
-rw-r--r--Documentation/devicetree/bindings/clock/emev2-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/keystone-pll.txt8
-rw-r--r--Documentation/devicetree/bindings/clock/lpc1850-ccu.txt77
-rw-r--r--Documentation/devicetree/bindings/clock/lpc1850-cgu.txt131
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa1928.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt44
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt6
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt6
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/st,stm32-rcc.txt65
-rw-r--r--Documentation/devicetree/bindings/clock/sunxi.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/ti,cdce925.txt42
23 files changed, 733 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
new file mode 100644
index 0000000..936166f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -0,0 +1,23 @@
+Mediatek apmixedsys controller
+==============================
+
+The Mediatek apmixedsys controller provides the PLLs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-apmixedsys"
+ - "mediatek,mt8173-apmixedsys"
+- #clock-cells: Must be 1
+
+The apmixedsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+apmixedsys: clock-controller@10209000 {
+ compatible = "mediatek,mt8173-apmixedsys";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
new file mode 100644
index 0000000..f6cd3e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -0,0 +1,30 @@
+Mediatek infracfg controller
+============================
+
+The Mediatek infracfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-infracfg", "syscon"
+ - "mediatek,mt8173-infracfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The infracfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+infracfg: power-controller@10001000 {
+ compatible = "mediatek,mt8173-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
new file mode 100644
index 0000000..f25b854
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -0,0 +1,30 @@
+Mediatek pericfg controller
+===========================
+
+The Mediatek pericfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-pericfg", "syscon"
+ - "mediatek,mt8173-pericfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The pericfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+pericfg: power-controller@10003000 {
+ compatible = "mediatek,mt8173-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
new file mode 100644
index 0000000..f9e9179
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -0,0 +1,23 @@
+Mediatek topckgen controller
+============================
+
+The Mediatek topckgen controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-topckgen"
+ - "mediatek,mt8173-topckgen"
+- #clock-cells: Must be 1
+
+The topckgen controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+topckgen: power-controller@10000000 {
+ compatible = "mediatek,mt8173-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 0000000..2b7b3fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,40 @@
+* Amlogic Meson8b Clock and Reset Unit
+
+The Amlogic Meson8b clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,meson8b-clkc"
+- reg: it must be composed by two tuples:
+ 0) physical base address of the xtal register and length of memory
+ mapped region.
+ 1) physical base address of the clock controller and length of memory
+ mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Example: Clock controller node:
+
+ clkc: clock-controller@c1104000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8b-clkc";
+ reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+ };
+
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
deleted file mode 100644
index 00d26ed..0000000
--- a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom Cygnus Clocks
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Currently various "fixed" clocks are declared for peripheral drivers that use
-the common clock framework to reference their core clocks. Proper support of
-these clocks will be added later
-
-Device tree example:
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <25000000>;
- };
-
- apb_clk: apb_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000000>;
- };
-
- periph_clk: periph_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <500000000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
new file mode 100644
index 0000000..da8d9bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -0,0 +1,132 @@
+Broadcom iProc Family Clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The iProc clock controller manages clocks that are common to the iProc family.
+An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
+LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+comprises of several leaf clocks
+
+Required properties for a PLL and its leaf clocks:
+
+- compatible:
+ Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
+Cygnus has a compatible string of "brcm,cygnus-genpll"
+
+- #clock-cells:
+ Have a value of <1> since there are more than 1 leaf clock of a given PLL
+
+- reg:
+ Define the base and range of the I/O address space that contain the iProc
+clock control registers required for the PLL
+
+- clocks:
+ The input parent clock phandle for the PLL. For most iProc PLLs, this is an
+onboard crystal with a fixed rate
+
+- clock-output-names:
+ An ordered list of strings defining the names of the clocks
+
+Example:
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ genpll: genpll {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+
+Required properties for ASIU clocks:
+
+ASIU clocks are a special case. These clocks are derived directly from the
+reference clock of the onboard crystal
+
+- compatible:
+ Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
+clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
+
+- #clock-cells:
+ Have a value of <1> since there are more than 1 ASIU clocks
+
+- reg:
+ Define the base and range of the I/O address space that contain the iProc
+clock control registers required for ASIU clocks
+
+- clocks:
+ The input parent clock phandle for the ASIU clock, i.e., the onboard
+crystal
+
+- clock-output-names:
+ An ordered list of strings defining the names of the ASIU clocks
+
+Example:
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ asiu_clks: asiu_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
+ };
+
+Cygnus
+------
+PLL and leaf clock compatible strings for Cygnus are:
+ "brcm,cygnus-armpll"
+ "brcm,cygnus-genpll"
+ "brcm,cygnus-lcpll0"
+ "brcm,cygnus-mipipll"
+ "brcm,cygnus-asiu-clk"
+
+The following table defines the set of PLL/clock index and ID for Cygnus.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-cygnus.h"
+
+ Clock Source (Parent) Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
+ adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
+ pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
+
+ genpll crystal 0 BCM_CYGNUS_GENPLL
+ axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
+ 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
+ ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+ enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
+ audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+ can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
+
+ lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
+ pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+ ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+ sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
+ usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+ smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+ ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+ mipipll crystal 0 BCM_CYGNUS_MIPIPLL
+ ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+ ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
+ ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
+ ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+ ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+ ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 06fc6d5..2ec489e 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -138,9 +138,10 @@ Some platforms may require initial configuration of default parent clocks
and clock frequencies. Such a configuration can be specified in a device tree
node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
properties. The assigned-clock-parents property should contain a list of parent
-clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
-property the list of assigned clock frequency values - corresponding to clocks
-listed in the assigned-clocks property.
+clocks in the form of a phandle and clock specifier pair and the
+assigned-clock-rates property should contain a list of frequencies in Hz. Both
+these properties should correspond to the clocks listed in the assigned-clocks
+property.
To skip setting parent or rate of a clock its corresponding entry should be
set to 0, or can be omitted if it is not followed by any non-zero entry.
diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
new file mode 100644
index 0000000..54d6d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
@@ -0,0 +1,55 @@
+* Clock and reset bindings for CSR atlas7
+
+Required properties:
+- compatible: Should be "sirf,atlas7-car"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- #reset-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
+
+The reset consumer should specify the desired reset by having the reset
+ID in its "reset" phandle cell.
+The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
+
+Examples: Clock and reset controller node:
+
+car: clock-controller@18620000 {
+ compatible = "sirf,atlas7-car";
+ reg = <0x18620000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
+
+Examples: Consumers using clock or reset:
+
+timer@10dc0000 {
+ compatible = "sirf,macro-tick";
+ reg = <0x10dc0000 0x1000>;
+ clocks = <&car 54>;
+ interrupts = <0 0 0>,
+ <0 1 0>,
+ <0 2 0>,
+ <0 49 0>,
+ <0 50 0>,
+ <0 51 0>;
+};
+
+uart1: uart@18020000 {
+ cell-index = <1>;
+ compatible = "sirf,macro-uart";
+ reg = <0x18020000 0x1000>;
+ clocks = <&clks 95>;
+ interrupts = <0 18 0>;
+ fifosize = <32>;
+};
+
+vpp@13110000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x13110000 0x10000>;
+ interrupts = <0 31 0>;
+ clocks = <&car 85>;
+ resets = <&car 29>;
+};
diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
index 60bbb1a..268ca61 100644
--- a/Documentation/devicetree/bindings/clock/emev2-clock.txt
+++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt
@@ -52,7 +52,7 @@ usia_u0_sclk: usia_u0_sclk {
Example of consumer:
-uart@e1020000 {
+serial@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
interrupts = <0 8 0>;
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
index 225990f..47570d2 100644
--- a/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -15,8 +15,8 @@ Required properties:
- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
- clocks : parent clock phandle
- reg - pll control0 and pll multipler registers
-- reg-names : control and multiplier. The multiplier is applicable only for
- main pll clock
+- reg-names : control, multiplier and post-divider. The multiplier and
+ post-divider registers are applicable only for main pll clock
- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
for postdiv
@@ -25,8 +25,8 @@ Example:
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
fixed-postdiv = <2>;
};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
new file mode 100644
index 0000000..fa97c12
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
@@ -0,0 +1,77 @@
+* NXP LPC1850 Clock Control Unit (CCU)
+
+Each CGU base clock has several clock branches which can be turned on
+or off independently by the Clock Control Units CCU1 or CCU2. The
+branch clocks are distributed between CCU1 and CCU2.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-ccu"
+- reg:
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells:
+ Shall have value <1>. The permitted clock-specifier values
+ are the branch clock names defined in table below.
+- clocks:
+ Shall contain a list of phandles for the base clocks routed
+ from the CGU to the specific CCU. See mapping of base clocks
+ and CCU in table below.
+- clock-names:
+ Shall contain a list of names for the base clock routed
+ from the CGU to the specific CCU. Valid CCU clock names:
+ "base_usb0_clk", "base_periph_clk", "base_usb1_clk",
+ "base_cpu_clk", "base_spifi_clk", "base_spi_clk",
+ "base_apb1_clk", "base_apb3_clk", "base_adchs_clk",
+ "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk",
+ "base_uart0_clk", "base_uart1_clk", "base_uart2_clk",
+ "base_uart3_clk", "base_audio_clk"
+
+Which branch clocks that are available on the CCU depends on the
+specific LPC part. Check the user manual for your specific part.
+
+A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+Example board file:
+
+soc {
+ ccu1: clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ clock-names = "base_apb3_clk", "base_apb1_clk",
+ "base_spifi_clk", "base_cpu_clk",
+ "base_periph_clk", "base_usb0_clk",
+ "base_usb1_clk", "base_spi_clk";
+ };
+
+ ccu2: clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ clock-names = "base_audio_clk", "base_uart3_clk",
+ "base_uart2_clk", "base_uart1_clk",
+ "base_uart0_clk", "base_ssp1_clk",
+ "base_ssp0_clk", "base_sdio_clk";
+ };
+
+ /* A user of CCU brach clocks */
+ uart1: serial@40082000 {
+ ...
+ clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
new file mode 100644
index 0000000..2cc32a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
@@ -0,0 +1,131 @@
+* NXP LPC1850 Clock Generation Unit (CGU)
+
+The CGU generates multiple independent clocks for the core and the
+peripheral blocks of the LPC18xx. Each independent clock is called
+a base clock and itself is one of the inputs to the two Clock
+Control Units (CCUs) which control the branch clocks to the
+individual peripherals.
+
+The CGU selects the inputs to the clock generators from multiple
+clock sources, controls the clock generation, and routes the outputs
+of the clock generators through the clock source bus to the output
+stages. Each output stage provides an independent clock source and
+corresponds to one of the base clocks for the LPC18xx.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-cgu"
+- reg:
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells:
+ Shall have value <1>. The permitted clock-specifier values
+ are the base clock numbers defined below.
+- clocks:
+ Shall contain a list of phandles for the external input
+ sources to the CGU. The list shall be in the following
+ order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
+- clock-indices:
+ Shall be an ordered list of numbers defining the base clock
+ number provided by the CGU.
+- clock-output-names:
+ Shall be an ordered list of strings defining the names of
+ the clocks provided by the CGU.
+
+Which base clocks that are available on the CGU depends on the
+specific LPC part. Base clocks are numbered from 0 to 27.
+
+Number: Name: Description:
+ 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT
+ 1 BASE_USB0_CLK Base clock for USB0
+ 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem,
+ SPI, and SGPIO
+ 3 BASE_USB1_CLK Base clock for USB1
+ 4 BASE_CPU_CLK System base clock for ARM Cortex-M core
+ and APB peripheral blocks #0 and #2
+ 5 BASE_SPIFI_CLK Base clock for SPIFI
+ 6 BASE_SPI_CLK Base clock for SPI
+ 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock
+ 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock
+ 9 BASE_APB1_CLK Base clock for APB peripheral block # 1
+10 BASE_APB3_CLK Base clock for APB peripheral block # 3
+11 BASE_LCD_CLK Base clock for LCD
+12 BASE_ADCHS_CLK Base clock for ADCHS
+13 BASE_SDIO_CLK Base clock for SD/MMC
+14 BASE_SSP0_CLK Base clock for SSP0
+15 BASE_SSP1_CLK Base clock for SSP1
+16 BASE_UART0_CLK Base clock for UART0
+17 BASE_UART1_CLK Base clock for UART1
+18 BASE_UART2_CLK Base clock for UART2
+19 BASE_UART3_CLK Base clock for UART3
+20 BASE_OUT_CLK Base clock for CLKOUT pin
+24-21 - Reserved
+25 BASE_AUDIO_CLK Base clock for audio system (I2S)
+26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output
+27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output
+
+BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+BASE_ADCHS_CLK is only available on LPC4370.
+
+
+Example board file:
+
+/ {
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ xtal32: xtal32 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ enet_rx_clk: enet_rx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_rx_clk";
+ };
+
+ enet_tx_clk: enet_tx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_tx_clk";
+ };
+
+ gp_clkin: gp_clkin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "gp_clkin";
+ };
+ };
+
+ soc {
+ cgu: clock-controller@40050000 {
+ compatible = "nxp,lpc1850-cgu";
+ reg = <0x40050000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+ };
+
+ /* A CGU and CCU clock consumer */
+ lcdc: lcdc@40008000 {
+ ...
+ clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
new file mode 100644
index 0000000..809c5a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
@@ -0,0 +1,21 @@
+* Marvell PXA1928 Clock Controllers
+
+The PXA1928 clock subsystem generates and supplies clock to various
+controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller
+blocks called APMU, MPMU, and APBC roughly corresponding to internal buses.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa1928-apmu" - APMU controller compatible
+ - "marvell,pxa1928-mpmu" - MPMU controller compatible
+ - "marvell,pxa1928-apbc" - APBC controller compatible
+- reg: physical base address of the clock controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use the clock controller
+phandle and this identifier to specify the clock which they consume.
+
+All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>.
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 31c7c0c..660e649 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -19,6 +19,7 @@ ID Clock Peripheral
9 pex1 PCIe Cntrl 1
15 sata0 SATA Host 0
17 sdio SDHCI Host
+23 crypto CESA (crypto engine)
25 tdm Time Division Mplx
28 ddr DDR Cntrl
30 sata1 SATA Host 0
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
index c6620bc..7f02fb4 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -20,15 +20,38 @@ Required properties :
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+- nvidia,external-memory-controller : phandle of the EMC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see
+field RAM_CODE in register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
+ is used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate to which this timing
+relates.
+- nvidia,parent-clock-frequency : Should contain the rate at which the current
+parent of the EMC clock should be running at this timing.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - emc-parent : the clock that should be the parent of the EMC clock at this
+timing.
Example SoC include file:
/ {
- tegra_car: clock {
+ tegra_car: clock@60006000 {
compatible = "nvidia,tegra124-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ nvidia,external-memory-controller = <&emc>;
};
usb@c5004000 {
@@ -62,4 +85,23 @@ Example board file:
&tegra_car {
clocks = <&clk_32k> <&osc>;
};
+
+ clock@60006000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+ nvidia,parent-clock-frequency = <408000000>;
+ clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "emc-parent";
+ };
+ timing-20400000 {
+ clock-frequency = <20400000>;
+ nvidia,parent-clock-frequency = <408000000>;
+ clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "emc-parent";
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 054f65f..5ddb684 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -10,9 +10,11 @@ Required Properties:
- "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
- "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
- "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
- - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+ - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks
+ - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks
+ - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks
- "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks
- - "renesas,cpg-div6-clock" for generic DIV6 clocks
+ and "renesas,cpg-div6-clock" as a fallback.
- reg: Base address and length of the memory resource used by the DIV6 clock
- clocks: Reference to the parent clock(s); either one, four, or eight
clocks must be specified. For clocks with multiple parents, invalid
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index 0a80fa7..16ed181 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -13,12 +13,14 @@ Required Properties:
- "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
- "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
- "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
+ - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+ - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
+ - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
- "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
- "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
- - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
+ and "renesas,cpg-mstp-clocks" as a fallback.
- reg: Base address and length of the I/O mapped registers used by the MSTP
clocks. The first register is the clock control register and is mandatory.
The second register is the clock status register and is optional when not
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index b02944f..56f111b 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -10,7 +10,7 @@ Required Properties:
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
- "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
- - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
+ and "renesas,rcar-gen2-cpg-clocks" as a fallback.
- reg: Base address and length of the memory resource used by the CPG
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
index 98a2574..b0f7ddb 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
@@ -7,7 +7,7 @@ Required Properties:
- compatible: Must be one of
- "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
- - "renesas,rz-cpg-clocks" for the generic RZ CPG
+ and "renesas,rz-cpg-clocks" as a fallback.
- reg: Base address and length of the memory resource used by the CPG
- clocks: References to possible parent clocks. Order must match clock modes
in the datasheet. For the r7s72100, this is extal, usb_x1.
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
new file mode 100644
index 0000000..fee3205
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -0,0 +1,65 @@
+STMicroelectronics STM32 Reset and Clock Controller
+===================================================
+
+The RCC IP is both a reset and a clock controller. This documentation only
+describes the clock part.
+
+Please also refer to clock-bindings.txt in this directory for common clock
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stm32f42xx-rcc"
+- reg: should be register base and length as documented in the
+ datasheet
+- #clock-cells: 2, device nodes should specify the clock in their "clocks"
+ property, containing a phandle to the clock device node, an index selecting
+ between gated clocks and other clocks and an index specifying the clock to
+ use.
+
+Example:
+
+ rcc: rcc@40023800 {
+ #clock-cells = <2>
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ };
+
+Specifying gated clocks
+=======================
+
+The primary index must be set to 0.
+
+The secondary index is the bit number within the RCC register bank, starting
+from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
+
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
+
+Example:
+
+ /* Gated clock, AHB1 bit 0 (GPIOA) */
+ ... {
+ clocks = <&rcc 0 0>
+ };
+
+ /* Gated clock, AHB2 bit 4 (CRYP) */
+ ... {
+ clocks = <&rcc 0 36>
+ };
+
+Specifying other clocks
+=======================
+
+The primary index must be set to 1.
+
+The secondary index is bound with the following magic numbers:
+
+ 0 SYSTICK
+ 1 FCLK
+
+Example:
+
+ /* Misc clock, FCLK */
+ ... {
+ clocks = <&rcc 1 1>
+ };
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 4fa11af..8a47b77 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -67,6 +67,7 @@ Required properties:
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+ "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
new file mode 100644
index 0000000..4c7669a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -0,0 +1,42 @@
+Binding for TO CDCE925 programmable I2C clock synthesizers.
+
+Reference
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] http://www.ti.com/product/cdce925
+
+The driver provides clock sources for each output Y1 through Y5.
+
+Required properties:
+ - compatible: Shall be "ti,cdce925"
+ - reg: I2C device address.
+ - clocks: Points to a fixed parent clock that provides the input frequency.
+ - #clock-cells: From common clock bindings: Shall be 1.
+
+Optional properties:
+ - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
+ board, or to compensate for external influences.
+
+For both PLL1 and PLL2 an optional child node can be used to specify spread
+spectrum clocking parameters for a board.
+ - spread-spectrum: SSC mode as defined in the data sheet.
+ - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
+ present, the clock runs at the requested frequency on average. Otherwise
+ the requested frequency is the maximum value of the SCC range.
+
+
+Example:
+
+ clockgen: cdce925pw@64 {
+ compatible = "cdce925";
+ reg = <0x64>;
+ clocks = <&xtal_27Mhz>;
+ #clock-cells = <1>;
+ xtal-load-pf = <5>;
+ /* PLL options to get SSC 1% centered */
+ PLL2 {
+ spread-spectrum = <4>;
+ spread-spectrum-center;
+ };
+ };
OpenPOWER on IntegriCloud