Merge tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next

Pull Allwinner clock patches for 4.12 from Maxime Ripard:

Support for the new H5 SoC and the PRCM block found in a number of SoCs as
well, plus the usual chunk of fixes and minor enhancements.

* tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: Display index when clock registration fails
  clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor
  clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks
  clk: sunxi-ng: mult: Support PLL lock detection
  clk: sunxi-ng: add support for PRCM CCUs
  dt-bindings: update device tree binding for Allwinner PRCM CCUs
  clk: sunxi-ng: sun5i: Fix mux width for csi clock
  clk: sunxi-ng: tighten SoC deps on explicit AllWinner SoCs
  clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver
  clk: sunxi-ng: gate: Support common pre-dividers

1 files changed, 17 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index bae5668..e9c5a1d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -7,9 +7,12 @@ Required properties :
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
+		- "allwinner,sun8i-h3-r-ccu"
 		- "allwinner,sun8i-v3s-ccu"
 		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
+		- "allwinner,sun50i-a64-r-ccu"
+		- "allwinner,sun50i-h5-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
@@ -19,7 +22,10 @@ Required properties :
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1
 
-Example:
+For the PRCM CCUs on H3/A64, one more clock is needed:
+- "iosc": the SoC's internal frequency oscillator
+
+Example for generic CCU:
 ccu: clock@01c20000 {
 	compatible = "allwinner,sun8i-h3-ccu";
 	reg = <0x01c20000 0x400>;
@@ -28,3 +34,13 @@ ccu: clock@01c20000 {
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };
+
+Example for PRCM CCU:
+r_ccu: clock@01f01400 {
+	compatible = "allwinner,sun50i-a64-r-ccu";
+	reg = <0x01f01400 0x100>;
+	clocks = <&osc24M>, <&osc32k>, <&iosc>;
+	clock-names = "hosc", "losc", "iosc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};