Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "Lots of changes as usual, so I'm trying to be brief here. Most of the
  new hardware support has the respective driver changes merged through
  other trees or has had it available for a while, so this is where
  things come together.

  We get a DT descriptions for a couple of new SoCs, all of them
  variants of other chips we already support, and usually coming with a
  new evaluation board:

   - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
   - Qualcomm MDM9615 LTE baseband
   - NXP imx6ull, the latest and smallest i.MX6 application processor variant
   - Renesas RZ/G (r8a7743 and r8a7745) application processors
   - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
   - Rockchip rk1108 single-core application processor
   - ST stm32f746 Cortex-M7 based microcontroller
   - TI DRA71x automotive processors

  These are commercially available consumer platforms we now support:

   - Motorola Droid 4 (xt894) mobile phone
   - Rikomagic MK808 Android TV stick based on Rockchips rx3066
   - Cloud Engines PogoPlug v3 based on OX820
   - Various Broadcom based wireless devices:
      - Netgear R8500 router
      - Tenda AC9 router
      - TP-LINK Archer C9 V1
      - Luxul XAP-1510 Access point
   - Turris Omnia open hardware router based on Armada 385

  And a couple of new boards targeted at developers, makers or
  industrial integration:

   - Macnica Sodia development platform for Altera socfpga (Cyclone V)
   - MicroZed board based on Xilinx Zynq FPGA platforms
   - TOPEET itop/elite based on exynos4412
   - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
   - NextThing CHIP Pro gadget
   - NanoPi M1 development board
   - AM571x-IDK industrial board based on TI AM5718
   - i.MX6SX UDOO Neo
   - Boundary Devices Nitrogen6_SOM2 (i.MX6)
   - Engicam i.CoreM6
   - Grinn i.MX6UL liteSOM/liteBoard
   - Toradex Colibri iMX6 module

  Other changes:

   - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
     mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
     mvebu, allwinner, broadcom, exynos, zynq

   - Continued fixes for W=1 dtc warnings

   - The old STiH415/416 SoC support gets removed, these never made it
     into products and have served their purpose in the kernel as a
     template for teh newer chips from ST

   - The exynos4415 dtsi file is removed as nothing uses it.

   - Intel PXA25x can now be booted using devicetree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
  arm: dts: zynq: Add MicroZed board support
  ARM: dts: da850: enable high speed for mmc
  ARM: dts: da850: Add node for pullup/pulldown pinconf
  ARM: dts: da850: enable memctrl and mstpri nodes per board
  ARM: dts: da850-lcdk: Add ethernet0 alias to DT
  ARM: dts: artpec: add pcie support
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
  ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
  ARM: dts: berlin2q-marvell-dmp: fix regulators' name
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ...

20 files changed, 88 insertions, 60 deletions

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index c1dcf4c..a1bcfee 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -178,6 +178,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,pj4b"
 			    "marvell,sheeva-v5"
 			    "nvidia,tegra132-denver"
+			    "nvidia,tegra186-denver"
 			    "qcom,krait"
 			    "qcom,kryo"
 			    "qcom,scorpion"
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 454b1be..05f95c3 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -178,6 +178,9 @@ Boards:
 - AM5728 IDK
   compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
 
+- AM5718 IDK
+  compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 
diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt
index b9e4971..ac64e60 100644
--- a/Documentation/devicetree/bindings/arm/oxnas.txt
+++ b/Documentation/devicetree/bindings/arm/oxnas.txt
@@ -5,5 +5,10 @@ Boards with the OX810SE SoC shall have the following properties:
   Required root node property:
     compatible: "oxsemi,ox810se"
 
+Boards with the OX820 SoC shall have the following properties:
+  Required root node property:
+    compatible: "oxsemi,ox820"
+
 Board compatible values:
   - "wd,mbwe" (OX810SE)
+  - "cloudengines,pogoplugv3" (OX820)
diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt
index 3e24518..43abf4e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.txt
+++ b/Documentation/devicetree/bindings/arm/qcom.txt
@@ -22,6 +22,7 @@ The 'SoC' element must be one of the following strings:
 	msm8916
 	msm8974
 	msm8996
+	mdm9615
 
 The 'board' element must be one of the following strings:
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 55f388f..e921f3e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -25,6 +25,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "radxa,rock2-square", "rockchip,rk3288";
 
+- Rikomagic MK808 v1 board:
+    Required root node properties:
+      - compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
 - Firefly Firefly-RK3288 board:
     Required root node properties:
       - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 0ea7f14..5160fa5 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -22,6 +22,9 @@ Required root node properties:
   * FriendlyARM
 	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
 				    TINY4412 board.
+  * TOPEET
+	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
+                                    Elite base board.
 
   * Google
 	- "google,pi"		- for Exynos5800-based Google Peach Pi
diff --git a/Documentation/devicetree/bindings/arm/swir.txt b/Documentation/devicetree/bindings/arm/swir.txt
new file mode 100644
index 0000000..042be73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/swir.txt
@@ -0,0 +1,12 @@
+Sierra Wireless Modules device tree bindings
+--------------------------------------------
+
+Supported Modules :
+ - WP8548 : Includes MDM9615 and PM8018 in a module
+
+Sierra Wireless modules shall have the following properties :
+  Required root node property
+   - compatible: "swir,wp8548" for the WP8548 CF3 Module
+
+Board compatible values:
+  - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index e1d01df..909c993 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -18,21 +18,6 @@ Optional properties:
 
 Example:
 
-	/* Example for stih416 */
-	sata0: sata@fe380000 {
-		compatible	= "st,ahci";
-		reg		= <0xfe380000 0x1000>;
-		interrupts	= <GIC_SPI 157 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH416_SATA0_POWERDOWN>,
-				  <&softreset STIH416_SATA0_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst";
-		clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};
-
 	/* Example for stih407 family silicon */
 	sata0: sata@9b20000 {
 		compatible	= "st,ahci";
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index c3d0165..30fd220 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -17,7 +17,9 @@ Required properties:
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be one.  It is the pin number.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify flags. See gpio.txt for possible
+  values.
 
 Example for a MMP platform:
 
@@ -27,7 +29,7 @@ Example for a MMP platform:
 		interrupts = <49>;
 		interrupt-names = "gpio_mux";
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
index e893615..b48d7d3 100644
--- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Example:
 
-mailbox: mailbox@7e00b800 {
+mailbox: mailbox@7e00b880 {
 	compatible = "brcm,bcm2835-mbox";
 	reg = <0x7e00b880 0x40>;
 	interrupts = <0 1>;
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 07184e8..ea9c1c9 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -13,6 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
+	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 66dcaa9..e705acd 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -7,6 +7,9 @@ Required properties:
 
 - reg : offset and length of the register set for the mux registers
 
+- #pinctrl-cells : number of cells in addition to the index, set to 1
+  for pinctrl-single,pins and 2 for pinctrl-single,bits
+
 - pinctrl-single,register-width : pinmux register access width in bits
 
 - pinctrl-single,function-mask : mask of allowed pinmux function bits
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
index 1cfd21d..9252713 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -16,15 +16,14 @@ Please refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-powerdown"
-	ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- compatible: Should be "st,stih407-powerdown"
 - #reset-cells: 1, see below
 
 example:
 
 	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
 		#reset-cells = <1>;
-		compatible = "st,stih415-powerdown";
 	};
 
 
@@ -37,11 +36,10 @@ index specifying which channel to use, as described in reset.txt
 
 example:
 
-	usb1: usb@fe200000 {
-		resets	= <&powerdown STIH41X_USB1_POWERDOWN>;
+	st_dwc3: dwc3@8f94000 {
+		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 	};
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index 891a2fd..a21658f 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -15,15 +15,14 @@ Please refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-softreset" example:
-	"st,stih415-softreset" or "st,stih416-softreset";
+- compatible: Should be st,stih407-softreset";
 - #reset-cells: 1, see below
 
 example:
 
 	softreset: softreset-controller {
 		#reset-cells = <1>;
-		compatible = "st,stih415-softreset";
+		compatible = "st,stih407-softreset";
 	};
 
 
@@ -42,5 +41,4 @@ example:
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 845850c..c93a2d1 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -10,7 +10,7 @@ Required properties:
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - serial
-- dmas : Must contain an entry for each entry in clock-names.
+- dmas : Must contain an entry for each entry in dma-names.
   See ../dma/dma.txt for details.
 - dma-names : Must include the following entries:
   - rx
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index e8f15e340..16fe94d 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,17 +9,20 @@ domain control.
 
 The driver implements the Generic PM domain bindings described in
 power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h.
+include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-scpsys"
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
 - infracfg: must contain a phandle to the infracfg controller
 - clock, clock-names: clocks according to the common clock binding.
-                      The clocks needed "mm", "mfg", "venc" and "venc_lt".
-		      These are the clocks which hardware needs to be enabled
-		      before enabling certain power domains.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701: "mm", "mfg", "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:
 - vdec-supply: Power supply for the vdec power domain
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
new file mode 100644
index 0000000..474531d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
@@ -0,0 +1,17 @@
+Binding for Thermal Sensor driver for BCM2835 SoCs.
+
+Required parameters:
+-------------------
+
+compatible: 	should be one of: "brcm,bcm2835-thermal",
+		"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
+reg:		Address range of the thermal registers.
+clocks: 	Phandle of the clock used by the thermal sensor.
+
+Example:
+
+thermal: thermal@7e212000 {
+	compatible = "brcm,bcm2835-thermal";
+	reg = <0x7e212000 0x8>;
+	clocks = <&clocks BCM2835_CLOCK_TSENS>;
+};
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
index 3b9251b..a2f9391 100644
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
 Required parameters:
 -------------------
 
-compatible : 	st,<SoC>-<module>-thermal; should be one of:
-		  "st,stih415-sas-thermal",
-		  "st,stih415-mpe-thermal",
-		  "st,stih416-sas-thermal"
-		  "st,stih416-mpe-thermal"
-		  "st,stid127-thermal" or
-		  "st,stih407-thermal"
-		according to the SoC type (stih415, stih416, stid127, stih407)
-		and module type (sas or mpe). On stid127 & stih407 there is only
-		one die/module, so there is no module type in the compatible
-		string.
+compatible : 	Should be "st,stih407-thermal"
+
 clock-names : 	Should be "thermal".
 		  See: Documentation/devicetree/bindings/resource-names.txt
 clocks : 	Phandle of the clock used by the thermal sensor.
@@ -25,18 +16,17 @@ Optional parameters:
 reg : 		For non-sysconf based sensors, this should be the physical base
 		address and length of the sensor's registers.
 interrupts :	Standard way to define interrupt number.
-		Interrupt is mandatory to be defined when compatible is
-		"stih416-mpe-thermal".
 		  NB: For thermal sensor's for which no interrupt has been
 		  defined, a polling delay of 1000ms will be used to read the
 		  temperature from device.
 
 Example:
 
-	temp1@fdfe8000 {
-		compatible	= "st,stih416-mpe-thermal";
-		reg		= <0xfdfe8000 0x10>;
-		clock-names	= "thermal";
-		clocks		= <&clk_m_mpethsens>;
-		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;
+	temp0@91a0000 {
+		compatible = "st,stih407-thermal";
+		reg = <0x91a0000 0x28>;
+		clock-names = "thermal";
+		clocks = <&CLK_SYSIN>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		st,passive_cooling_temp = <110>;
 	};
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index f4262ed..ad8ea56 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -6,9 +6,9 @@ Required properties:
  - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
    used in host mode.
  - reg: Address and length of the register set for the device
- - interrupts: Should contain ehci interrupt
+ - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain three strings
 		"ohci_clk" for the peripheral clock
 		"hclk" for the host clock
 		"uhpck" for the system clock
@@ -35,7 +35,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
@@ -58,7 +58,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain macb interrupt
  - clocks: Should reference the peripheral and the AHB clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the AHB clock
 
@@ -85,7 +85,7 @@ Required properties:
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
- - clock-names: Should contains two strings
+ - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
  - ep childnode: To specify the number of endpoints and their properties.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6e25c91..448c831 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -70,6 +70,7 @@ creative	Creative Technology Ltd
 crystalfontz	Crystalfontz America, Inc.
 cubietech	Cubietech, Ltd.
 cypress	Cypress Semiconductor Corporation
+cznic	CZ.NIC, z.s.p.o.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 delta	Delta Electronics, Inc.
@@ -242,6 +243,7 @@ realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
 richtek	Richtek Technology Corporation
 ricoh	Ricoh Co. Ltd.
+rikomagic	Rikomagic Tech Corp. Ltd
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 samtec	Samtec/Softing company