summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorMaxime Ripard <maxime.ripard@free-electrons.com>2017-01-23 11:41:49 +0100
committerAlexandre Belloni <alexandre.belloni@free-electrons.com>2017-02-01 12:44:18 +0100
commit3855c2c3e5461ab5ece9c1578650fcc23dd248c2 (patch)
treece61421ea80b304ef924be9bc12a33b4582e3431 /Documentation/devicetree
parentfb61bb82cb46a932ef2fc62e1c731c8e7e6640d5 (diff)
downloadop-kernel-dev-3855c2c3e5461ab5ece9c1578650fcc23dd248c2.zip
op-kernel-dev-3855c2c3e5461ab5ece9c1578650fcc23dd248c2.tar.gz
rtc: sun6i: Expose the 32kHz oscillator
The RTC controls the input source of the main 32kHz oscillator in the system, feeding it to the clock unit too. By default, this is using an internal, very inaccurate (+/- 30%) oscillator with a divider to make it roughly around 32kHz. This is however quite impractical for the RTC, since our time will not be tracked properly. Since this oscillator is an input of the main clock unit, and since that clock unit will be probed using CLK_OF_DECLARE, we have to use it as well, leading to a two stage probe: one to enable the clock, the other one to enable the RTC. There is also a slight change in the binding that is required (and should have been from the beginning), since we'll need a phandle to the external oscillator used on that board. We support the old binding by not allowing to switch to the external oscillator and only using the internal one (which was the previous behaviour) in the case where we're missing that phandle. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/rtc/sun6i-rtc.txt10
1 files changed, 10 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
index f007e42..9459349 100644
--- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
@@ -8,10 +8,20 @@ Required properties:
memory mapped region.
- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.
+Required properties for new device trees
+- clocks : phandle to the 32kHz external oscillator
+- clock-output-names : name of the LOSC clock created
+- #clock-cells : must be equals to 1. The RTC provides two clocks: the
+ LOSC and its external output, with index 0 and 1
+ respectively.
+
Example:
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <0 40 4>, <0 41 4>;
+ clock-output-names = "osc32k";
+ clocks = <&ext_osc32k>;
+ #clock-cells = <1>;
};
OpenPOWER on IntegriCloud