Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal updates from Zhang Rui:
 "Specifics:

   - adds full support for 2 types of Thermal Controllers produced by
     STMicroelectronics.  One is a more traditional memory mapped
     variant, the other is controlled solely by system configuration
     registers.  From Lee Jones.

   - add TMU (Thermal Management Unit) support for Exynos3250 Soc.
     From Chanwoo Choi.

   - add critical and passive trip point support for int3403 thermal
     driver.  From Srinivas Pandruvada.

   - a couple of small fixes/cleanups from Javi Merino, and Geert
     Uytterhoeven"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: document struct thermal_zone_device and thermal_governor
  thermal: cpu_cooling: fix typo highjack -> hijack
  thermal: rcar: Document SoC-specific bindings
  thermal: samsung: Add TMU support for Exynos3250 SoC
  thermal: exynos: fix ordering in exynos_tmu_remove()
  thermal: allow building dove_thermal with mvebu
  thermal: sti: Add support for ST's Memory Mapped based Thermal controller
  thermal: sti: Add support for ST's System Config Register based Thermal controller
  thermal: sti: Introduce ST Thermal core code
  thermal: sti: Supply Device Tree documentation
  Thermal: int3403: Add CRT and PSV trip

3 files changed, 55 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index c949092..ae738f5 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -3,6 +3,7 @@
 ** Required properties:
 
 - compatible : One of the following:
+	       "samsung,exynos3250-tmu"
 	       "samsung,exynos4412-tmu"
 	       "samsung,exynos4210-tmu"
 	       "samsung,exynos5250-tmu"
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 28ef498..0ef00be 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,7 +1,13 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,rcar-thermal"
+- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
+			  as fallback.
+			  Examples with soctypes are:
+			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)
+			    - "renesas,thermal-r8a7779" (R-Car H1)
+			    - "renesas,thermal-r8a7790" (R-Car H2)
+			    - "renesas,thermal-r8a7791" (R-Car M2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
@@ -12,18 +18,18 @@ Option properties:
 
 Example (non interrupt support):
 
-thermal@e61f0100 {
-	compatible = "renesas,rcar-thermal";
-	reg = <0xe61f0100 0x38>;
+thermal@ffc48000 {
+	compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+	reg = <0xffc48000 0x38>;
 };
 
 Example (interrupt support):
 
 thermal@e61f0000 {
-	compatible = "renesas,rcar-thermal";
+	compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
 	reg = <0xe61f0000 0x14
 		0xe61f0100 0x38
 		0xe61f0200 0x38
 		0xe61f0300 0x38>;
-	interrupts = <0 69 4>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
new file mode 100644
index 0000000..3b9251b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -0,0 +1,42 @@
+Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
+
+Required parameters:
+-------------------
+
+compatible : 	st,<SoC>-<module>-thermal; should be one of:
+		  "st,stih415-sas-thermal",
+		  "st,stih415-mpe-thermal",
+		  "st,stih416-sas-thermal"
+		  "st,stih416-mpe-thermal"
+		  "st,stid127-thermal" or
+		  "st,stih407-thermal"
+		according to the SoC type (stih415, stih416, stid127, stih407)
+		and module type (sas or mpe). On stid127 & stih407 there is only
+		one die/module, so there is no module type in the compatible
+		string.
+clock-names : 	Should be "thermal".
+		  See: Documentation/devicetree/bindings/resource-names.txt
+clocks : 	Phandle of the clock used by the thermal sensor.
+		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional parameters:
+-------------------
+
+reg : 		For non-sysconf based sensors, this should be the physical base
+		address and length of the sensor's registers.
+interrupts :	Standard way to define interrupt number.
+		Interrupt is mandatory to be defined when compatible is
+		"stih416-mpe-thermal".
+		  NB: For thermal sensor's for which no interrupt has been
+		  defined, a polling delay of 1000ms will be used to read the
+		  temperature from device.
+
+Example:
+
+	temp1@fdfe8000 {
+		compatible	= "st,stih416-mpe-thermal";
+		reg		= <0xfdfe8000 0x10>;
+		clock-names	= "thermal";
+		clocks		= <&clk_m_mpethsens>;
+		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;
+	};