Merge branch 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits)
  arm/dt: tegra devicetree support
  arm/versatile: Add device tree support
  dt/irq: add irq_domain_generate_simple() helper
  irq: add irq_domain translation infrastructure
  dmaengine: imx-sdma: add device tree probe support
  dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name
  dmaengine: imx-sdma: use platform_device_id to identify sdma version
  mmc: sdhci-esdhc-imx: add device tree probe support
  mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  mmc: sdhci-esdhc-imx: do not reference platform data after probe
  mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  net/fec: add device tree probe support
  net: ibm_newemac: convert it to use of_get_phy_mode
  dt/net: add helper function of_get_phy_mode
  net/fec: gasket needs to be enabled for some i.mx
  serial/imx: add device tree probe support
  serial/imx: get rid of the uses of cpu_is_mx1()
  arm/dt: Add dtb make rule
  arm/dt: Add skeleton dtsi file
  ...

8 files changed, 142 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
new file mode 100644
index 0000000..91f2614
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -0,0 +1,20 @@
+ARM Versatile Application and Platform Baseboards
+-------------------------------------------------
+ARM's development hardware platform with connectors for customizable
+core tiles.  The hardware configuration of the Versatile boards is
+highly customizable.
+
+Required properties (in root node):
+	compatible = "arm,versatile-ab";  /* Application baseboard */
+	compatible = "arm,versatile-pb";  /* Platform baseboard */
+
+Interrupt controllers:
+- VIC required properties:
+	compatible = "arm,versatile-vic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+- SIC required properties:
+	compatible = "arm,versatile-sic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
new file mode 100644
index 0000000..d1e3f44
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -0,0 +1,17 @@
+* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-sdma"
+- reg : Should contain SDMA registers location and length
+- interrupts : Should contain SDMA interrupt
+- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
+  scripts firmware
+
+Examples:
+
+sdma@83fb0000 {
+	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+	reg = <0x83fb0000 0x4000>;
+	interrupts = <6>;
+	fsl,sdma-ram-script-name = "sdma-imx51.bin";
+};
diff --git a/Documentation/devicetree/bindings/i2c/arm-versatile.txt b/Documentation/devicetree/bindings/i2c/arm-versatile.txt
new file mode 100644
index 0000000..361d31c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm-versatile.txt
@@ -0,0 +1,10 @@
+i2c Controller on ARM Versatile platform:
+
+Required properties:
+- compatible : Must be "arm,versatile-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
new file mode 100644
index 0000000..ab22fe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -0,0 +1,34 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+The Enhanced Secure Digital Host Controller on Freescale i.MX family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible : Should be "fsl,<chip>-esdhc"
+- reg : Should contain eSDHC registers location and length
+- interrupts : Should contain eSDHC interrupt
+
+Optional properties:
+- fsl,card-wired : Indicate the card is wired to host permanently
+- fsl,cd-internal : Indicate to use controller internal card detection
+- fsl,wp-internal : Indicate to use controller internal write protection
+- cd-gpios : Specify GPIOs for card detection
+- wp-gpios : Specify GPIOs for write protection
+
+Examples:
+
+esdhc@70004000 {
+	compatible = "fsl,imx51-esdhc";
+	reg = <0x70004000 0x4000>;
+	interrupts = <1>;
+	fsl,cd-internal;
+	fsl,wp-internal;
+};
+
+esdhc@70008000 {
+	compatible = "fsl,imx51-esdhc";
+	reg = <0x70008000 0x4000>;
+	interrupts = <2>;
+	cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+	wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+};
diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
new file mode 100644
index 0000000..476845d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
@@ -0,0 +1,8 @@
+Flash device on ARM Versatile board
+
+Required properties:
+- compatible : must be "arm,versatile-flash";
+- bank-width : width in bytes of flash interface.
+
+Optional properties:
+- Subnode partition map from mtd flash binding
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
new file mode 100644
index 0000000..de43951
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -0,0 +1,24 @@
+* Freescale Fast Ethernet Controller (FEC)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-fec"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain fec interrupt
+- phy-mode : String, operation mode of the PHY interface.
+  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+- phy-reset-gpios : Should specify the gpio for phy reset
+
+Optional properties:
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+fec@83fec000 {
+	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+	reg = <0x83fec000 0x4000>;
+	interrupts = <87>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+	local-mac-address = [00 04 9F 01 1B B9];
+};
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
new file mode 100644
index 0000000..953049b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -0,0 +1,10 @@
+SMSC LAN91c111 Ethernet mac
+
+Required properties:
+- compatible = "smsc,lan91c111";
+- reg : physical address and size of registers
+- interrupts : interrupt connection
+
+Optional properties:
+- phy-device : phandle to Ethernet phy
+- local-mac-address : Ethernet mac address to use
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
new file mode 100644
index 0000000..a9c0406
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -0,0 +1,19 @@
+* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-uart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Optional properties:
+- fsl,uart-has-rtscts : Indicate the uart has rts and cts
+- fsl,irda-mode : Indicate the uart supports irda mode
+
+Example:
+
+uart@73fbc000 {
+	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+	reg = <0x73fbc000 0x4000>;
+	interrupts = <31>;
+	fsl,uart-has-rtscts;
+};