Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
new file mode 100644
index 0000000..f372cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -0,0 +1,46 @@
+* Renesas SH-Mobile Serial Communication Interface
+
+Required properties:
+
+  - compatible: Must contain one of the following:
+
+    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
+    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
+    - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART.
+    - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART.
+    - "renesas,scif" for generic SCIF compatible UART.
+    - "renesas,scifa" for generic SCIFA compatible UART.
+    - "renesas,scifb" for generic SCIFB compatible UART.
+    - "renesas,hscif" for generic HSCIF compatible UART.
+
+    When compatible with the generic version, nodes must list the
+    SoC-specific version corresponding to the platform first followed by the
+    generic version.
+
+  - reg: Base address and length of the I/O registers used by the UART.
+  - interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
+
+  - clocks: Must contain a phandle and clock-specifier pair for each entry
+    in clock-names.
+  - clock-names: Must contain "sci_ick" for the SCIx UART interface clock.
+
+Note: Each enabled SCIx UART should have an alias correctly numbered in the
+"aliases" node.
+
+Example:
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+	};