diff options
author | Jon Ringle <jringle@gridpoint.com> | 2014-04-24 20:56:07 -0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-04-25 10:08:48 -0700 |
commit | 89054c7b5bb83050fb783efc5a528eebb42c0925 (patch) | |
tree | aebcf55f95687ba2597fa94be3c194d030bc9299 /Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt | |
parent | dfeae619d781dee61666d5551b93ba3be755a86b (diff) | |
download | op-kernel-dev-89054c7b5bb83050fb783efc5a528eebb42c0925.zip op-kernel-dev-89054c7b5bb83050fb783efc5a528eebb42c0925.tar.gz |
serial: sc16is7xx: Add bindings documentation for the SC16IS7XX UARTs
This patch adds the devicetree documentation for the NXP SC16IS7XX UARTs.
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt')
-rw-r--r-- | Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt new file mode 100644 index 0000000..246c795 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -0,0 +1,33 @@ +* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART) + +Required properties: +- compatible: Should be one of the following: + - "nxp,sc16is740" for NXP SC16IS740, + - "nxp,sc16is741" for NXP SC16IS741, + - "nxp,sc16is750" for NXP SC16IS750, + - "nxp,sc16is752" for NXP SC16IS752, + - "nxp,sc16is760" for NXP SC16IS760, + - "nxp,sc16is762" for NXP SC16IS762. +- reg: I2C address of the SC16IS7xx device. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this IC. +- interrupts: Should contain the UART interrupt +- clocks: Reference to the IC source clock. + +Optional properties: +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be two. The first cell is the GPIO number and + the second cell is used to specify the GPIO polarity: + 0 = active high, + 1 = active low. + +Example: + sc16is750: sc16is750@51 { + compatible = "nxp,sc16is750"; + reg = <0x51>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; |