Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the large tty/serial patchset for 4.13-rc1.

  A lot of tty and serial driver updates are in here, along with some
  fixups for some __get/put_user usages that were reported. Nothing
  huge, just lots of development by a number of different developers,
  full details in the shortlog.

  All of these have been in linux-next for a while"

* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty: serial: lpuart: add a more accurate baud rate calculation method
  tty: serial: lpuart: add earlycon support for imx7ulp
  tty: serial: lpuart: add imx7ulp support
  dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
  tty: serial: lpuart: add little endian 32 bit register support
  tty: serial: lpuart: refactor lpuart32_{read|write} prototype
  tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
  serial: imx-serial - move DMA buffer configuration to DT
  serial: imx: Enable RTSD only when needed
  serial: imx: Remove unused members from imx_port struct
  serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
  serial: 8250: Fix THRE flag usage for CAP_MINI
  tty/serial: meson_uart: update to stable bindings
  dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
  serial: Delete dead code for CIR serial ports
  serial: sirf: make of_device_ids const
  serial/mpsc: switch to dma_alloc_attrs
  tty: serial: Add Actions Semi Owl UART earlycon
  dt-bindings: serial: Document Actions Semi Owl UARTs
  tty/serial: atmel: make the driver DT only
  ...

1 files changed, 16 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
new file mode 100644
index 0000000..aa873ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
@@ -0,0 +1,16 @@
+Actions Semi Owl UART
+
+Required properties:
+- compatible :  "actions,s500-uart", "actions,owl-uart" for S500
+                "actions,s900-uart", "actions,owl-uart" for S900
+- reg        :  Offset and length of the register set for the device.
+- interrupts :  Should contain UART interrupt.
+
+
+Example:
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};