diff options
author | Boris BREZILLON <linux-arm@overkiz.com> | 2013-01-08 16:36:42 +0100 |
---|---|---|
committer | Thierry Reding <thierry.reding@avionic-design.de> | 2013-01-08 16:52:10 +0100 |
commit | 9421bade0765d8ffb86b8a99213b611278a3542a (patch) | |
tree | 83bacefbd5536255dae0fba58bff5bdacdf2b6b8 /Documentation/devicetree/bindings/pwm | |
parent | d1c3ed669a2d452cacfb48c2d171a1f364dae2ed (diff) | |
download | op-kernel-dev-9421bade0765d8ffb86b8a99213b611278a3542a.zip op-kernel-dev-9421bade0765d8ffb86b8a99213b611278a3542a.tar.gz |
pwm: atmel: add Timer Counter Block PWM driver
This patch adds a PWM driver based on Atmel Timer Counter Block. The
Timer Counter Block is used in Waveform generator mode.
A Timer Counter Block provides up to 6 PWM devices grouped by 2:
* group 0 = PWM 0 and 1
* group 1 = PWM 2 and 3
* group 2 = PMW 4 and 5
PWM devices in a given group must be configured with the same period
value. If a PWM device in a group tries to change the period value and
the other device is already configured with a different value an error
will be returned.
This driver requires device tree support. The Timer Counter Block number
used to create a PWM chip is given by the tc-block field in an
"atmel,tcb-pwm" compatible node.
This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds.
Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Diffstat (limited to 'Documentation/devicetree/bindings/pwm')
-rw-r--r-- | Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt new file mode 100644 index 0000000..de0eaed --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt @@ -0,0 +1,18 @@ +Atmel TCB PWM controller + +Required properties: +- compatible: should be "atmel,tcb-pwm" +- #pwm-cells: Should be 3. The first cell specifies the per-chip index + of the PWM to use, the second cell is the period in nanoseconds and + bit 0 in the third cell is used to encode the polarity of PWM output. + Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity & + set to 0 for normal polarity. +- tc-block: The Timer Counter block to use as a PWM chip. + +Example: + +pwm { + compatible = "atmel,tcb-pwm"; + #pwm-cells = <3>; + tc-block = <1>; +}; |