dt-bindings: tegra: Remove 0, prefix from unit-addresses

When Tegra124 support was first merged the unit-addresses of all devices
were listed with a "0," prefix to encode the reg property's second cell.
It turns out that this notation is not correct, and the "," separator is
only used to separate fields in the unit address (such as the device and
function number in PCI devices), not individual cells for addresses
with more than one cell.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 3 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
index 30676de..9c8ddd5 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -79,7 +79,7 @@ Example:
 SoC file extract:
 -----------------
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		compatible = "nvidia,tegra124-xusb-padctl";
 		reg = <0x0 0x7009f000 0x0 0x1000>;
 		resets = <&tegra_car 142>;
@@ -91,7 +91,7 @@ SoC file extract:
 Board file extract:
 -------------------
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		...
 
 		phys = <&padctl 0>;
@@ -102,7 +102,7 @@ Board file extract:
 
 	...
 
-	padctl: padctl@0,7009f000 {
+	padctl: padctl@7009f000 {
 		pinctrl-0 = <&padctl_default>;
 		pinctrl-names = "default";