diff options
author | Murali Karicheri <m-karicheri2@ti.com> | 2014-09-10 13:12:38 -0400 |
---|---|---|
committer | Bjorn Helgaas <bhelgaas@google.com> | 2014-09-16 15:45:45 -0600 |
commit | 4455efc90855ff5a6065caea835b0d13a284c5a1 (patch) | |
tree | d6fd97a368d2b74129260e7ff968a33a94def507 /Documentation/devicetree/bindings/pci | |
parent | c15982dfa8227f3e8fd2a6e2e13a009a9991d96c (diff) | |
download | op-kernel-dev-4455efc90855ff5a6065caea835b0d13a284c5a1.zip op-kernel-dev-4455efc90855ff5a6065caea835b0d13a284c5a1.tar.gz |
PCI: keystone: Assume controller is already in RC mode
Keystone PCI hardware supports both RC and EP modes and devcfg register has
bits to boot strap the device to either of these modes. It seems proper to
add this functionality to the boot loader rather than in the driver as
device will be operating in either mode, not both any time. Currently the
driver supports only RC mode and hence register configuration in the driver
is not needed and the driver can assume the hardware is in RC mode.
Also update the DT documentation accordingly.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
-rw-r--r-- | Documentation/devicetree/bindings/pci/pci-keystone.txt | 4 |
1 files changed, 1 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index de9c475..54eae29 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -13,9 +13,7 @@ Required Properties:- compatibility: "ti,keystone-pcie" reg: index 1 is the base address and length of DW application registers. - index 2 is the base address and length of PCI mode configuration - register. - index 3 is the base address and length of PCI device ID register. + index 2 is the base address and length of PCI device ID register. pcie_msi_intc : Interrupt controller device node for MSI IRQ chip interrupt-cells: should be set to 1 |