Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-02

Here's the first bluetooth-next pull request targeting the 4.1 kernel:

 - ieee802154/6lowpan cleanups
 - SCO routing to host interface support for the btmrvl driver
 - AMP code cleanups
 - Fixes to AMP HCI init sequence
 - Refactoring of the HCI callback mechanism
 - Added shutdown routine for Intel controllers in the btusb driver
 - New config option to enable/disable Bluetooth debugfs information
 - Fix for early data reception on L2CAP fixed channels

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
index d3bbdded..168f1be 100644
--- a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
+++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
@@ -6,11 +6,14 @@ Required properties:
   - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
 			sync or async operation mode
   - reg:		the chipselect index
-  - interrupts:		the interrupt generated by the device
+  - interrupts:		the interrupt generated by the device. Non high-level
+			can occur deadlocks while handling isr.
 
 Optional properties:
   - reset-gpio:		GPIO spec for the rstn pin
   - sleep-gpio:		GPIO spec for the slp_tr pin
+  - xtal-trim:		u8 value for fine tuning the internal capacitance
+			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
 
 Example:
 
@@ -18,6 +21,7 @@ Example:
 		compatible = "atmel,at86rf231";
 		spi-max-frequency = <7500000>;
 		reg = <0>;
-		interrupts = <19 1>;
+		interrupts = <19 4>;
 		interrupt-parent = <&gpio3>;
+		xtal-trim = /bits/ 8 <0x06>;
 	};