dt: name all Tegra binding docs consistently

Rename all Tegra binding documentation according to the first or
primary compatible value they describe. This provides a clear naming
scheme for the files, and prevents any naming conflicts should future
SoC versions require their own binding.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 0 insertions, 27 deletions

diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
deleted file mode 100644
index f77c303..0000000
--- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* NVIDIA Tegra Secure Digital Host Controller
-
-This controller on Tegra family SoCs provides an interface for MMC, SD,
-and SDIO types of memory cards.
-
-Required properties:
-- compatible : Should be "nvidia,<chip>-sdhci"
-- reg : Should contain SD/MMC registers location and length
-- interrupts : Should contain SD/MMC interrupt
-- bus-width : Number of data lines, can be <1>, <4>, or <8>
-
-Optional properties:
-- cd-gpios : Specify GPIOs for card detection
-- wp-gpios : Specify GPIOs for write protection
-- power-gpios : Specify GPIOs for power control
-
-Example:
-
-sdhci@c8000200 {
-	compatible = "nvidia,tegra20-sdhci";
-	reg = <0xc8000200 0x200>;
-	interrupts = <47>;
-	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-	power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	bus-width = <8>;
-};