summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
commitce53044c68cf4fb6c50a2a0d88786be65fae7235 (patch)
tree19c21da7d261412192e189ef3fd1a9ff4e7ba5c2 /Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
parent0877aa3908aaeeae8fc2850691668c4315d3db56 (diff)
parent046fae440d32cc6dec8148c7e06a8b4b987f8a2f (diff)
downloadop-kernel-dev-ce53044c68cf4fb6c50a2a0d88786be65fae7235.zip
op-kernel-dev-ce53044c68cf4fb6c50a2a0d88786be65fae7235.tar.gz
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt')
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt4
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
index 7e51154..f77c303 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
@@ -7,12 +7,12 @@ Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
- reg : Should contain SD/MMC registers location and length
- interrupts : Should contain SD/MMC interrupt
+- bus-width : Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- cd-gpios : Specify GPIOs for card detection
- wp-gpios : Specify GPIOs for write protection
- power-gpios : Specify GPIOs for power control
-- support-8bit : Boolean, indicates if 8-bit mode should be used.
Example:
@@ -23,5 +23,5 @@ sdhci@c8000200 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
- support-8bit;
+ bus-width = <8>;
};
OpenPOWER on IntegriCloud