Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - videobuf2 was moved to a media/common dir, as it is now used by the
   DVB subsystem too

 - Digital TV core memory mapped support interface

 - new sensor driver: ov7740

 - several improvements at ddbridge driver

 - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
   SoCs

 - new tuner driver: tda18250

 - finally got rid of all LIRC staging drivers

 - as we don't have old lirc drivers anymore, restruct the lirc device
   code

 - add support for UVC metadata

 - add a new staging driver for NVIDIA Tegra Video Decoder Engine

 - DVB kAPI headers moved to include/media

 - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
   for non-legacy APIs

 - reduce the kAPI gap for V4L2

 - lots of other driver enhancements, cleanups, etc.

* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
  media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
  media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
  media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
  media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
  media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
  media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
  media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
  media: v4l2-compat-ioctl32.c: avoid sizeof(type)
  media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
  media: v4l2-compat-ioctl32.c: fix the indentation
  media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
  media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
  media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
  media: vivid: fix module load error when enabling fb and no_error_inj=1
  media: dvb_demux: improve debug messages
  media: dvb_demux: Better handle discontinuity errors
  media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
  media: ts2020: avoid integer overflows on 32 bit machines
  media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
  media: entity: Add a nop variant of media_entity_cleanup
  ...

7 files changed, 163 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
index 46a0bac..12fcd55 100644
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ b/Documentation/devicetree/bindings/media/cec-gpio.txt
@@ -4,6 +4,10 @@ The HDMI CEC GPIO module supports CEC implementations where the CEC line
 is hooked up to a pull-up GPIO line and - optionally - the HPD line is
 hooked up to another GPIO line.
 
+Please note: the maximum voltage for the CEC line is 3.63V, for the HPD
+line it is 5.3V. So you may need some sort of level conversion circuitry
+when connecting them to a GPIO line.
+
 Required properties:
   - compatible: value must be "cec-gpio".
   - cec-gpios: gpio that the CEC line is connected to. The line should be
@@ -21,7 +25,7 @@ the following property is optional:
 
 Example for the Raspberry Pi 3 where the CEC line is connected to
 pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is
-connected to pin 11 aka BCM17:
+connected to pin 11 aka BCM17 (some level shifter is needed for this!):
 
 #include <dt-bindings/gpio/gpio.h>
 
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
index ed5a334..6b91003 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -6,6 +6,8 @@ interface.
 
 Required Properties:
 - compatible: value should be "micron,mt9m111"
+- clocks: reference to the master clock.
+- clock-names: shall be "mclk".
 
 For further reading on port node refer to
 Documentation/devicetree/bindings/media/video-interfaces.txt.
@@ -16,6 +18,8 @@ Example:
 		mt9m111@5d {
 			compatible = "micron,mt9m111";
 			reg = <0x5d>;
+			clocks = <&mclk>;
+			clock-names = "mclk";
 
 			remote = <&pxa_camera>;
 			port {
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
index 540b36c..8e36da0 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
@@ -1,4 +1,4 @@
-* Omnivision OV5640 MIPI CSI-2 sensor
+* Omnivision OV5640 MIPI CSI-2 / parallel sensor
 
 Required Properties:
 - compatible: should be "ovti,ov5640"
@@ -18,7 +18,25 @@ The device node must contain one 'port' child node for its digital output
 video port, in accordance with the video interface bindings defined in
 Documentation/devicetree/bindings/media/video-interfaces.txt.
 
-Example:
+OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint.
+
+Endpoint node required properties for CSI-2 connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- clock-lanes: should be set to <0> (clock lane on hardware lane 0)
+- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported)
+
+Endpoint node required properties for parallel connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- bus-width: shall be set to <8> for 8 bits parallel bus
+	     or <10> for 10 bits parallel bus
+- data-shift: shall be set to <2> for 8 bits parallel bus
+	      (lines 9:2 are used) or <0> for 10 bits parallel bus
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
+	       signal.
+
+Examples:
 
 &i2c1 {
 	ov5640: camera@3c {
@@ -35,6 +53,7 @@ Example:
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 
 		port {
+			/* MIPI CSI-2 bus endpoint */
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_from_ov5640>;
 				clock-lanes = <0>;
@@ -43,3 +62,26 @@ Example:
 		};
 	};
 };
+
+&i2c1 {
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xclk";
+
+		port {
+			/* Parallel bus endpoint */
+			ov5640_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_ov5640>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 0000000..af781c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,47 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+The common video interfaces bindings (see video-interfaces.txt) should
+be used to specify link to the image data receiver. The OV7740 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Required Properties:
+- compatible:	"ovti,ov7740".
+- reg:		I2C slave address of the sensor.
+- clocks:	Reference to the xvclk input clock.
+- clock-names:	"xvclk".
+
+Optional Properties:
+- reset-gpios: Rreference to the GPIO connected to the reset_b pin,
+  if any. Active low with pull-ip resistor.
+- powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
+  if any. Active high with pull-down resistor.
+
+Endpoint node mandatory properties:
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+Example:
+
+	i2c1: i2c@fc028000 {
+		ov7740: camera@21 {
+			compatible = "ovti,ov7740";
+			reg = <0x21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+			clocks = <&isc>;
+			clock-names = "xvclk";
+			assigned-clocks = <&isc>;
+			assigned-clock-rates = <24000000>;
+			reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+			port {
+				ov7740_0: endpoint {
+					remote-endpoint = <&isc_0>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
index 0b7b6a4..e80d589 100644
--- a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
@@ -20,6 +20,13 @@ Mandatory properties
   is in hardware standby mode when the signal is in the low state.
 
 
+Optional properties
+-------------------
+
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+
 Endpoint node mandatory properties
 ----------------------------------
 
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
new file mode 100644
index 0000000..470237e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
@@ -0,0 +1,55 @@
+NVIDIA Tegra Video Decoder Engine
+
+Required properties:
+- compatible : Must contain one of the following values:
+   - "nvidia,tegra20-vde"
+   - "nvidia,tegra30-vde"
+   - "nvidia,tegra114-vde"
+   - "nvidia,tegra124-vde"
+   - "nvidia,tegra132-vde"
+- reg : Must contain an entry for each entry in reg-names.
+- reg-names : Must include the following entries:
+  - sxe
+  - bsev
+  - mbe
+  - ppe
+  - mce
+  - tfe
+  - ppb
+  - vdma
+  - frameid
+- iram : Must contain phandle to the mmio-sram device node that represents
+         IRAM region used by VDE.
+- interrupts : Must contain an entry for each entry in interrupt-names.
+- interrupt-names : Must include the following entries:
+  - sync-token
+  - bsev
+  - sxe
+- clocks : Must include the following entries:
+  - vde
+- resets : Must include the following entries:
+  - vde
+
+Example:
+
+video-codec@6001a000 {
+	compatible = "nvidia,tegra20-vde";
+	reg = <0x6001a000 0x1000 /* Syntax Engine */
+	       0x6001b000 0x1000 /* Video Bitstream Engine */
+	       0x6001c000  0x100 /* Macroblock Engine */
+	       0x6001c200  0x100 /* Post-processing Engine */
+	       0x6001c400  0x100 /* Motion Compensation Engine */
+	       0x6001c600  0x100 /* Transform Engine */
+	       0x6001c800  0x100 /* Pixel prediction block */
+	       0x6001ca00  0x100 /* Video DMA */
+	       0x6001d800  0x300 /* Video frame controls */>;
+	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+		    "tfe", "ppb", "vdma", "frameid";
+	iram = <&vde_pool>; /* IRAM region */
+	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+	interrupt-names = "sync-token", "bsev", "sxe";
+	clocks = <&tegra_car TEGRA20_CLK_VDE>;
+	resets = <&tegra_car 61>;
+};
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt
index 9dd86b3..439351a 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt
@@ -66,6 +66,6 @@ Example:
 				tpg1_out: endpoint {
 					remote-endpoint = <&switch_in0>;
 				};
-			}:
+			};
 		};
 	};