irqchip: irq-dove: Add PMU interrupt controller.

Dove has a Power Management Unit with its own interrupt
controller. This is chained on the main interrupt controller.  Add a
driver, making use of generic chip where possible.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

cc: devicetree@vger.kernel.org
cc: pawel.moll@arm.com
cc: mark.rutland@arm.com
cc: swarren@wwwdotorg.org
cc: ian.campbell@citrix.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 17 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt
new file mode 100644
index 0000000..1feb582
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,dove-pmu-intc.txt
@@ -0,0 +1,17 @@
+Marvell Dove Power Management Unit interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,dove-pmu-intc"
+- reg: base address of PMU interrupt registers starting with CAUSE register
+- interrupts: PMU interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Example:
+	pmu_intc: pmu-interrupt-ctrl@d0050 {
+		compatible = "marvell,dove-pmu-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd0050 0x8>;
+		interrupts = <33>;
+	};