Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "The first round of updates for the input subsystem.

  Just new drivers and existing driver fixes, no core changes except for
  the new uinput IOCTL to allow userspace to fetch sysfs name of the
  input device that was created"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (43 commits)
  Input: edt-ft5x06 - add a missing condition
  Input: appletouch - fix jumps when additional fingers are detected
  Input: appletouch - implement sensor data smoothing
  Input: add driver for SOC button array
  Input: pm8xxx-vibrator - add DT match table
  Input: pmic8xxx-pwrkey - migrate to DT
  Input: pmic8xxx-keypad - migrate to DT
  Input: pmic8xxx-keypad - migrate to regmap APIs
  Input: pmic8xxx-keypad - migrate to devm_* APIs
  Input: pmic8xxx-keypad - fix build by removing gpio configuration
  Input: add new driver for ARM CLPS711X keypad
  Input: edt-ft5x06 - add support for M09 firmware version
  Input: edt-ft5x06 - ignore touchdown events
  Input: edt-ft5x06 - adjust delays to conform datasheet
  Input: edt-ft5x06 - add DT support
  Input: edt-ft5x06 - several cleanups; no functional change
  Input: appletouch - dial back fuzz setting
  Input: remove obsolete tnetv107x drivers
  Input: sirfsoc-onkey - set the capability of reporting KEY_POWER
  Input: da9052_onkey - use correct register bit for key status
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
new file mode 100644
index 0000000..588536c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
@@ -0,0 +1,46 @@
+Qualcomm PM8xxx PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-pwrkey"
+		    "qcom,pm8921-pwrkey"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address of power key control register
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first interrupt specifies the key release interrupt
+		    and the second interrupt specifies the key press interrupt.
+		    The format of the specifier is defined by the binding
+		    document describing the node's interrupt parent.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or release
+		    for state change interrupt to trigger.
+
+- pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: presence of this property indicates that the KPDPWR_N pin
+		    should be configured for pull up.
+
+EXAMPLE
+
+	pwrkey@1c {
+		compatible = "qcom,pm8921-pwrkey";
+		reg = <0x1c>;
+		interrupt-parent = <&pmicintc>;
+		interrupts = <50 1>, <51 1>;
+		debounce = <15625>;
+		pull-up;
+	};