summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2016-09-13 10:24:52 +1000
committerDave Airlie <airlied@redhat.com>2016-09-13 10:24:52 +1000
commitb4eac5465b23a9bcb4a66376a5664086b4913288 (patch)
treeece5cb45bbb01fab9621678c3fb8c722ed3e34db /Documentation/devicetree/bindings/display
parent1f8ee720cebd2a4988e2627aa0c45465778c3171 (diff)
parent0c3ff44cc23cbede56aa1ca5916b126e681ca69b (diff)
downloadop-kernel-dev-b4eac5465b23a9bcb4a66376a5664086b4913288.zip
op-kernel-dev-b4eac5465b23a9bcb4a66376a5664086b4913288.tar.gz
Merge tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.9 This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33), and the usual few fixes and enhancements * tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: add missing header dependencies drm/sun4i: Add a DRC driver drm/sun4i: backend: Handle the SAT drm/sun4i: support A33 tcon drm/sun4i: support TCONs without channel 1 drm/sun4i: Clear encoder->bridge if a bridge is not found drm/sun4i: rgb: add missing calls to drm_panel_{prepare,unprepare} drm/sun4i: Remove redundant dev_err call in sun4i_tcon_init_regmap() drm/sun4i: Add bridge support drm/sun4i: Move panel retrieval in RGB connector drm/sun4i: Store TCON's device structure pointer
Diffstat (limited to 'Documentation/devicetree/bindings/display')
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt43
1 files changed, 41 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index df8f4ae..b95696d 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -26,13 +26,14 @@ TCON
The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
Required properties:
- - compatible: value should be "allwinner,sun5i-a13-tcon".
+ - compatible: value must be either:
+ * allwinner,sun5i-a13-tcon
+ * allwinner,sun8i-a33-tcon
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the TCON. Three are needed:
- 'ahb': the interface clocks
- 'tcon-ch0': The clock driving the TCON channel 0
- - 'tcon-ch1': The clock driving the TCON channel 1
- resets: phandles to the reset controllers driving the encoder
- "lcd": the reset line for the TCON channel 0
@@ -49,6 +50,33 @@ Required properties:
second the block connected to the TCON channel 1 (usually the TV
encoder)
+On the A13, there is one more clock required:
+ - 'tcon-ch1': The clock driving the TCON channel 1
+
+DRC
+---
+
+The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
+(A31, A23, A33), allows to dynamically adjust pixel
+brightness/contrast based on histogram measurements for LCD content
+adaptive backlight control.
+
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun8i-a33-drc
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the DRC
+ * ahb: the DRC interface clock
+ * mod: the DRC module clock
+ * ram: the DRC DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset line driving the DRC
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the outputs
Display Engine Backend
----------------------
@@ -59,6 +87,7 @@ system.
Required properties:
- compatible: value must be one of:
* allwinner,sun5i-a13-display-backend
+ * allwinner,sun8i-a33-display-backend
- reg: base address and size of the memory-mapped region.
- clocks: phandles to the clocks feeding the frontend and backend
* ahb: the backend interface clock
@@ -71,6 +100,14 @@ Required properties:
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the output
+On the A33, some additional properties are required:
+ - reg needs to have an additional region corresponding to the SAT
+ - reg-names need to be set, with "be" and "sat"
+ - clocks and clock-names need to have a phandle to the SAT bus
+ clocks, whose name will be "sat"
+ - resets and reset-names need to have a phandle to the SAT bus
+ resets, whose name will be "sat"
+
Display Engine Frontend
-----------------------
@@ -80,6 +117,7 @@ deinterlacing and color space conversion.
Required properties:
- compatible: value must be one of:
* allwinner,sun5i-a13-display-frontend
+ * allwinner,sun8i-a33-display-frontend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
@@ -104,6 +142,7 @@ extra node.
Required properties:
- compatible: value must be one of:
* allwinner,sun5i-a13-display-engine
+ * allwinner,sun8i-a33-display-engine
- allwinner,pipelines: list of phandle to the display engine
frontends available.
OpenPOWER on IntegriCloud