Merge tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.8-rc1

This set of changes contains a bunch of cleanups to the host1x driver as
well as the addition of a pin controller for DPAUX, which is required by
boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C
mode (for HDMI and DDC).

Included is also a bit of rework of the SOR driver in preparation to add
DisplayPort support as well as some refactoring and cleanup.

Finally, all output drivers are converted to runtime PM, which greatly
simplifies the handling of clocks and resets.

* tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits)
  drm/tegra: sor: Reject HDMI 2.0 modes
  drm/tegra: sor: Prepare for generic PM domain support
  drm/tegra: dsi: Prepare for generic PM domain support
  drm/tegra: sor: Make XBAR configurable per SoC
  drm/tegra: sor: Use sor1_src clock to set parent for HDMI
  dt-bindings: display: tegra: Add source clock for SOR
  drm/tegra: sor: Implement sor1_brick clock
  drm/tegra: sor: Implement runtime PM
  drm/tegra: hdmi: Implement runtime PM
  drm/tegra: dsi: Implement runtime PM
  drm/tegra: dc: Implement runtime PM
  drm/tegra: hdmi: Enable audio over HDMI
  drm/tegra: sor: Do not support deep color modes
  drm/tegra: sor: Extract tegra_sor_mode_set()
  drm/tegra: sor: Split out tegra_sor_apply_config()
  drm/tegra: sor: Rename tegra_sor_calc_config()
  drm/tegra: sor: Factor out tegra_sor_set_parent_clock()
  drm/tegra: dpaux: Add pinctrl support
  dt-bindings: Add bindings for Tegra DPAUX pinctrl driver
  drm/tegra: Prepare DPAUX for supporting generic PM domains
  ...

1 files changed, 10 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index a3bd8c0..0fad7ed 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -208,6 +208,7 @@ of the following host1x client modules:
     See ../clocks/clock-bindings.txt for details.
   - clock-names: Must include the following entries:
     - sor: clock input for the SOR hardware
+    - source: source clock for the SOR clock
     - parent: input for the pixel clock
     - dp: reference clock for the SOR clock
     - safe: safe reference for the SOR clock during power up
@@ -226,9 +227,9 @@ of the following host1x client modules:
   - nvidia,dpaux: phandle to a DispayPort AUX interface
 
 - dpaux: DisplayPort AUX interface
-  - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux".  Otherwise,
-    must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
-    <chip> is tegra132.
+  - compatible : Should contain one of the following:
+    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
+    - "nvidia,tegra210-dpaux": for Tegra210
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
@@ -241,6 +242,12 @@ of the following host1x client modules:
   - reset-names: Must include the following entries:
     - dpaux
   - vdd-supply: phandle of a supply that powers the DisplayPort link
+  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
+    must be always present. If there are no I2C slave devices, an empty
+    node should be added. See ../../i2c/i2c.txt for more information.
+
+  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
+  regarding the DPAUX pad controller bindings.
 
 Example: