Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...

8 files changed, 178 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
new file mode 100644
index 0000000..003bc24
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
@@ -0,0 +1,48 @@
+Dumb RGB to VGA DAC bridge
+---------------------------
+
+This binding is aimed for dumb RGB to VGA DAC based bridges that do not require
+any configuration.
+
+Required properties:
+
+- compatible: Must be "dumb-vga-dac"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+
+Example
+-------
+
+bridge {
+	compatible = "dumb-vga-dac";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vga_bridge_in: endpoint {
+				remote-endpoint = <&tcon0_out_vga>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			vga_bridge_out: endpoint {
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index e178e6b..24cc246 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -21,8 +21,19 @@ Optional properties:
   - video-ports: 24 bits value which defines how the video controller
 	output is wired to the TDA998x input - default: <0x230145>
 
+  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
+	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
+	The second value defines the tda998x AP_ENA reg content when the DAI
+	in question is used. The implementation allows one or two DAIs. If two
+	DAIs are defined, they must be of different type.
+
+[1] Documentation/sound/alsa/soc/DAI.txt
+[2] include/dt-bindings/display/tda998x.h
+
 Example:
 
+#include <dt-bindings/display/tda998x.h>
+
 	tda998x: hdmi-encoder {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
@@ -30,4 +41,11 @@ Example:
 		interrupts = <27 2>;		/* falling edge */
 		pinctrl-0 = <&pmx_camera>;
 		pinctrl-names = "default";
+		video-ports = <0x230145>;
+
+		#sound-dai-cells = <2>;
+			     /*	DAI-format	AP_ENA reg value */
+		audio-ports = <	TDA998x_SPDIF	0x04
+				TDA998x_I2S	0x03>;
+
 	};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index b63f614..2ad5789 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -14,17 +14,16 @@ Required properties:
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
-- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
-- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
-- qcom,hdmi-tx-hpd-gpio: hpd pin
 - core-vdda-supply: phandle to supply regulator
 - hdmi-mux-supply: phandle to mux regulator
 - phys: the phandle for the HDMI PHY device
 - phy-names: the name of the corresponding PHY device
 
 Optional properties:
-- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- hpd-gpios: hpd pin
+- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
+- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
+- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
 - power-domains: reference to the power domain(s), if available.
 - pinctrl-names: the pin control state names; should contain "default"
 - pinctrl-0: the default pinctrl state (active)
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
new file mode 100644
index 0000000..9e75904
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+
+Required properties:
+- compatible: should be "innolux,g101ice-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..4989c91d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,31 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+  Power IC supply enable, High active
+
+Example:
+
+	dsi0: qcom,mdss_dsi@4700000 {
+		panel@0 {
+			compatible = "jdi,lt070me05000";
+			reg = <0>;
+
+			vddp-supply = <&pm8921_l17>;
+			iovcc-supply = <&pm8921_lvs7>;
+
+			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index 5489b59..9eb3f0a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -6,8 +6,10 @@ buffer to an external LCD interface.
 
 Required properties:
 - compatible: value should be one of the following
-		"rockchip,rk3288-vop";
 		"rockchip,rk3036-vop";
+		"rockchip,rk3288-vop";
+		"rockchip,rk3399-vop-big";
+		"rockchip,rk3399-vop-lit";
 
 - interrupts: should contain a list of all VOP IP block interrupts in the
 		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index df8f4ae..b95696d 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -26,13 +26,14 @@ TCON
 The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
 
 Required properties:
- - compatible: value should be "allwinner,sun5i-a13-tcon".
+ - compatible: value must be either:
+   * allwinner,sun5i-a13-tcon
+   * allwinner,sun8i-a33-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
  - clocks: phandles to the clocks feeding the TCON. Three are needed:
    - 'ahb': the interface clocks
    - 'tcon-ch0': The clock driving the TCON channel 0
-   - 'tcon-ch1': The clock driving the TCON channel 1
  - resets: phandles to the reset controllers driving the encoder
    - "lcd": the reset line for the TCON channel 0
 
@@ -49,6 +50,33 @@ Required properties:
   second the block connected to the TCON channel 1 (usually the TV
   encoder)
 
+On the A13, there is one more clock required:
+   - 'tcon-ch1': The clock driving the TCON channel 1
+
+DRC
+---
+
+The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
+(A31, A23, A33), allows to dynamically adjust pixel
+brightness/contrast based on histogram measurements for LCD content
+adaptive backlight control.
+
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun8i-a33-drc
+  - reg: base address and size of the memory-mapped region.
+  - interrupts: interrupt associated to this IP
+  - clocks: phandles to the clocks feeding the DRC
+    * ahb: the DRC interface clock
+    * mod: the DRC module clock
+    * ram: the DRC DRAM clock
+  - clock-names: the clock names mentioned above
+  - resets: phandles to the reset line driving the DRC
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoints, the second one the outputs
 
 Display Engine Backend
 ----------------------
@@ -59,6 +87,7 @@ system.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-backend
+    * allwinner,sun8i-a33-display-backend
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the frontend and backend
     * ahb: the backend interface clock
@@ -71,6 +100,14 @@ Required properties:
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoints, the second one the output
 
+On the A33, some additional properties are required:
+  - reg needs to have an additional region corresponding to the SAT
+  - reg-names need to be set, with "be" and "sat"
+  - clocks and clock-names need to have a phandle to the SAT bus
+    clocks, whose name will be "sat"
+  - resets and reset-names need to have a phandle to the SAT bus
+    resets, whose name will be "sat"
+
 Display Engine Frontend
 -----------------------
 
@@ -80,6 +117,7 @@ deinterlacing and color space conversion.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-frontend
+    * allwinner,sun8i-a33-display-frontend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the frontend and backend
@@ -104,6 +142,7 @@ extra node.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-engine
+    * allwinner,sun8i-a33-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
     frontends available.
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 2136ee8..a83abd7 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -17,6 +17,18 @@ Optional properties:
    the lcd controller.
  - max-pixelclock: The maximum pixel clock that can be supported
    by the lcd controller in KHz.
+ - blue-and-red-wiring: Recognized values "straight" or "crossed".
+   This property deals with the LCDC revision 2 (found on AM335x)
+   color errata [1].
+    - "straight" indicates normal wiring that supports RGB565,
+      BGR888, and XBGR8888 color formats.
+    - "crossed" indicates wiring that has blue and red wires
+      crossed. This setup supports BGR565, RGB888 and XRGB8888
+      formats.
+    - If the property is not present or its value is not recognized
+      the legacy mode is assumed. This configuration supports RGB565,
+      RGB888 and XRGB8888 formats. However, depending on wiring, the red
+      and blue colors are swapped in either 16 or 24-bit color modes.
 
 Optional nodes:
 
@@ -24,6 +36,18 @@ Optional nodes:
    binding follows Documentation/devicetree/bindings/graph.txt and
    suppors a single port with a single endpoint.
 
+ - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
+   Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+   tfp410 DVI encoder or lcd panel to lcdc
+
+[1] There is an errata about AM335x color wiring. For 16-bit color mode
+    the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
+    but for 24 bit color modes the wiring of blue and red components is
+    crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
+    for Blue[3-7]. For more details see section 3.1.1 in AM335x
+    Silicon Errata:
+    http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
+
 Example:
 
 	fb: fb@4830e000 {
@@ -33,6 +57,8 @@ Example:
 		interrupts = <36>;
 		ti,hwmods = "lcdc";
 
+		blue-and-red-wiring = "crossed";
+
 		port {
 			lcdc_0: endpoint@0 {
 				remote-endpoint = <&hdmi_0>;