diff options
author | Gregory CLEMENT <gregory.clement@free-electrons.com> | 2017-04-05 17:18:02 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2017-04-24 11:28:09 +0200 |
commit | f13980e4083854aa0cebd502a413857e7b302075 (patch) | |
tree | 666e35fbe4649eacc488465204dd008c88d2c088 /Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt | |
parent | 0ca4921fe9cbbc1c35bd924907552b38f0009840 (diff) | |
download | op-kernel-dev-f13980e4083854aa0cebd502a413857e7b302075.zip op-kernel-dev-f13980e4083854aa0cebd502a413857e7b302075.tar.gz |
pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
Document the device tree binding for the pin controllers found on the
Armada 37xx SoCs.
Update the binding documention of the xtal clk which is a subnode of this
syscon node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
[Fixed gpios node]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt')
-rw-r--r-- | Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt index a88f1f0..4c0807f 100644 --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt +++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt @@ -5,6 +5,7 @@ reading the gpio latch register. This node must be a subnode of the node exposing the register address of the GPIO block where the gpio latch is located. +See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt Required properties: - compatible : shall be one of the following: @@ -16,9 +17,9 @@ Optional properties: output names ("xtal") Example: -gpio1: gpio@13800 { - compatible = "marvell,armada-3700-gpio", "syscon", "simple-mfd"; - reg = <0x13800 0x1000>; +pinctrl_nb: pinctrl-nb@13800 { + compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; + reg = <0x13800 0x100>, <0x13C00 0x20>; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; |