Merge tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

i.MX SoC changes for 3.15 from Shawn Guo:
 - Support suspend from ocram (DDR IO floating) for imx6 platforms
 - Add cpuidle support for imx6sl
 - Sparse warning fixes for imx6sl and vf610 clock code
 - Remove PWM platform code
 - Support ptp and rmii clock from pad
 - Support WEIM CS GPR configuration
 - Random cleanups and defconfig updates

* tag 'imx-soc-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (373 commits)
  ARM: imx6: drop .text.head section annotation from headsmp.S
  ARM: imx6: build suspend-imx6.o with CONFIG_SOC_IMX6
  ARM: imx6: rename pm-imx6q.c to pm-imx6.c
  ARM: imx6: introduce CONFIG_SOC_IMX6 for i.MX6 common stuff
  ARM: imx6: do not call imx6q_suspend_init() with !CONFIG_SUSPEND
  ARM: imx6: call suspend_set_ops() from suspend routine
  ARM: imx6: build headsmp.o only on CONFIG_SMP
  ARM: imx6: move v7_cpu_resume() into suspend-imx6.S
  ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority
  ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr
  bus: imx-weim: support CS GPR configuration
  ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53
  ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FS
  ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC level
  ARM: imx: add speed grading check for i.mx6 soc
  ARM: imx: avoid calling clk APIs in idle thread which may cause schedule
  ARM: imx6q: support ptp and rmii clock from pad
  ARM: imx6q: remove unneeded clk lookups
  ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
  ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUME
  ...

1 files changed, 27 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 0fd76c4..6630d84 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -8,7 +8,12 @@ The actual devices are instantiated from the child nodes of a WEIM node.
 
 Required properties:
 
- - compatible:		Should be set to "fsl,<soc>-weim"
+ - compatible:		Should contain one of the following:
+			  "fsl,imx1-weim"
+			  "fsl,imx27-weim"
+			  "fsl,imx51-weim"
+			  "fsl,imx50-weim"
+			  "fsl,imx6q-weim"
  - reg:			A resource specifier for the register space
 			(see the example below)
  - clocks:		the clock, see the example below.
@@ -19,6 +24,26 @@ Required properties:
 
 			   <cs-number> 0 <physical address of mapping> <size>
 
+Optional properties:
+
+ - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, it should be the phandle to the system General
+			Purpose Register controller that contains WEIM CS GPR
+			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
+			should be set up as one of the following 4 possible
+			values depending on the CS space configuration.
+
+			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+			---------------------------------------------
+				05	    128M     0M     0M     0M
+				033          64M    64M     0M     0M
+				0113         64M    32M    32M     0M
+				01111        32M    32M    32M    32M
+
+			In case that the property is absent, the reset value or
+			what bootloader sets up in IOMUXC_GPR1[11:0] will be
+			used.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
@@ -43,6 +68,7 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0x08000000 0x08000000>;
+		fsl,weim-cs-gpr = <&gpr>;
 
 		nor@0,0 {
 			compatible = "cfi-flash";