Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  New machines:

   - The new Action Semi S500 platform is added along with initial
     support for the LeMaker Guitar board.

   - STM32 gains support for three new boards: stm32h743-disco,
     stm32f746-disco, and stm32f769-disco, along with new device support
     for the existing stm32f429 boards.

   - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
     10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
     board.

   - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
     wireless router.

   - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
     the Technexion Pico i.MX7D single-board computers.

   - The BeagleBone Blue is added for OMAP, it's the latest variation of
     the popular Beaglebone Black single-board computer.

   - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
     added, these are the latest variations of a seemingly endless
     supply of similar single-board computers.

  Other updates:

   - Linus Walleij improves support for the "Faraday" based SoC
     platforms from various SoC makers (Moxart, Aspeed, Gemini)

   - The ARM Mali GPU is now describe on Rockchips SoCs

   - Mediatek MT7623 is extended significantly, making it much more
     useful.

   - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
     Allwinner, Qualcomm, iMX

   - For Amlogic, the clock support is extended a lot on meson8b.

   - We now build the devicetree file for the Raspberry Pi 3 on 32-bit
     ARM, in addition to the existing ARM64 support, to help users
     wanting to run a 32-bit system on it"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
  ARM: dts: socfpga: set the i2c frequency
  ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
  ARM: dts: socfpga: Drop LED node from VINING FPGA
  ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
  ARM: dts: socfpga: Enable QSPI support on VINING FPGA
  ARM: dts: socfpga: Fix the ethernet clock phandle
  ARM: pxa: Use - instead of @ for DT OPP entries
  ARM: dts: owl-s500: Add SPS node
  ARM: dts: owl-s500: Set CPU enable-method
  dt-bindings: arm: cpus: Add S500 enable-method
  ARM: dts: Add Actions Semi S500 and LeMaker Guitar
  dt-bindings: arm: Document Actions Semi S900
  dt-bindings: timer: Document Owl timer
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  dt-bindings: arm: Document Actions Semi S500
  dt-bindings: Add vendor prefix for Actions Semi
  ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
  ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
  ARM: dts: armada-385-linksys: fixup button node names
  ARM: dts: armada-385-linksys: group pins in pinctrl
  ...

7 files changed, 79 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt
new file mode 100644
index 0000000..3bc7ea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/actions.txt
@@ -0,0 +1,39 @@
+Actions Semi platforms device tree bindings
+-------------------------------------------
+
+
+S500 SoC
+========
+
+Required root node properties:
+
+ - compatible :  must contain "actions,s500"
+
+
+Modules:
+
+Root node property compatible must contain, depending on module:
+
+ - LeMaker Guitar: "lemaker,guitar"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar"
+
+
+S900 SoC
+========
+
+Required root node properties:
+
+- compatible :  must contain "actions,s900"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96"
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 2713aad..ad1913b 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -193,6 +193,7 @@ nodes to be present and contain the properties described below.
 			     "spin-table"
 			# On ARM 32-bit systems this property is optional and
 			  can be one of:
+			    "actions,s500-smp"
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
 			    "arm,realview-smp"
diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt
index 0041eb0..55bf7ce 100644
--- a/Documentation/devicetree/bindings/arm/gemini.txt
+++ b/Documentation/devicetree/bindings/arm/gemini.txt
@@ -24,6 +24,19 @@ Required nodes:
   global control registers, with the compatible string
   "cortina,gemini-syscon", "syscon";
 
+  Required properties on the syscon:
+  - reg: syscon register location and size.
+  - #clock-cells: should be set to <1> - the system controller is also a
+                  clock provider.
+  - #reset-cells: should be set to <1> - the system controller is also a
+                  reset line provider.
+
+  The clock sources have shorthand defines in the include file:
+  <dt-bindings/clock/cortina,gemini-clock.h>
+
+  The reset lines have shorthand defines in the include file:
+  <dt-bindings/reset/cortina,gemini-reset.h>
+
 - timer: the soc bus node must have a timer node pointing to the SoC timer
   block, with the compatible string "cortina,gemini-timer"
   See: clocksource/cortina,gemini-timer.txt
@@ -56,12 +69,15 @@ Example:
 		syscon: syscon@40000000 {
 			compatible = "cortina,gemini-syscon", "syscon";
 			reg = <0x40000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		uart0: serial@42000000 {
 			compatible = "ns16550a";
 			reg = <0x42000000 0x100>;
-			clock-frequency = <48000000>;
+			resets = <&syscon GEMINI_RESET_UART>;
+			clocks = <&syscon GEMINI_CLK_UART>;
 			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 		};
@@ -73,12 +89,18 @@ Example:
 			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
 				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
 				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			resets = <&syscon GEMINI_RESET_TIMER>;
+			/* APB clock or RTC clock */
+			clocks = <&syscon GEMINI_CLK_APB>,
+				 <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
 			syscon = <&syscon>;
 		};
 
 		intcon: interrupt-controller@48000000 {
 			compatible = "cortina,gemini-interrupt-controller";
 			reg = <0x48000000 0x1000>;
+			resets = <&syscon GEMINI_RESET_INTCON0>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
index 48f6703..f310bad 100644
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -37,3 +37,6 @@ Boards:
 
 -  K2G EVM
    compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone"
+
+-  K2G Industrial Communication Engine EVM
+   compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index c965d99e..7b48474 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -138,9 +138,9 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
-- Rockchip RK1108 Evaluation board
+- Rockchip RV1108 Evaluation board
     Required root node properties:
-      - compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+      - compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
 
 - Rockchip RK3368 evb:
     Required root node properties:
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 170fe05..1a671e3 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -55,12 +55,19 @@ Boards:
     compatible = "renesas,bockw", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)
     compatible = "renesas,genmai", "renesas,r7s72100"
+  - GR-Peach (X28A-M01-E/F)
+    compatible = "renesas,gr-peach", "renesas,r7s72100"
   - Gose (RTP0RC7793SEB00010S)
     compatible = "renesas,gose", "renesas,r8a7793"
-  - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
+  - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
+    H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
     compatible = "renesas,h3ulcb", "renesas,r8a7795";
   - Henninger
     compatible = "renesas,henninger", "renesas,r8a7791"
+  - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
+    compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
+  - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
+    compatible = "iwave,g20m", "renesas,r8a7743"
   - Koelsch (RTP0RC7791SEB00010S)
     compatible = "renesas,koelsch", "renesas,r8a7791"
   - Kyoto Microcomputer Co. KZM-A9-Dual
@@ -69,7 +76,7 @@ Boards:
     compatible = "renesas,kzm9g", "renesas,sh73a0"
   - Lager (RTP0RC7790SEB00010S)
     compatible = "renesas,lager", "renesas,r8a7790"
-  - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
+  - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
     compatible = "renesas,m3ulcb", "renesas,r8a7796";
   - Marzen (R0P7779A00010S)
     compatible = "renesas,marzen", "renesas,r8a7779"
@@ -81,6 +88,8 @@ Boards:
     compatible = "renesas,salvator-x", "renesas,r8a7795";
   - Salvator-X (RTP0RC7796SIPB0011S)
     compatible = "renesas,salvator-x", "renesas,r8a7796";
+  - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
+    compatible = "renesas,salvator-xs", "renesas,r8a7795";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"
   - SK-RZG1E (YR8A77450S000BE)
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index b5a4342..7f1411b 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -29,7 +29,6 @@ board-specific compatible values:
   nvidia,harmony
   nvidia,seaboard
   nvidia,ventana
-  nvidia,whistler
   toradex,apalis_t30
   toradex,apalis_t30-eval
   toradex,apalis-tk1