Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v3.16

- exynos4
  : add missing pinctrls

- exynos4412-trats2
  : update camera nodes and add rear camera nodes
  : rename alias for i2c_ak8975 label
  Update camera nodes for exynos4 and exynos4412-trats2

- exynos5250
  : update DWC3 usb controller and enable to use generic USB DRD phy

- exynos5250-snow
  : enable dp-controller, fimd, hdmi and pwm backlight
  : add sound node and Vbus regulator for USB 3.0
  : add tps65090 power regulator
  : add pinctrl for EC irq and i2c-arbitrator

- exynos5420
  : change to correct compatible string for hdmi
  : add PD entry to MFC codec and enable DWC3 and USB 3.0 PHY
  : add MFC memory banks for smdk5420 and arndale-octa boards

- exynos5420-peach-pit
  : add support exynos5420 based peach-pit board
  : add sound node and Vbus regulatro for USB 3.0
  : enable dp-controller, fimd
- exynos5420-smdk5420
  : add Vbus regulatro for USB 3.0

- use generic DT bindings for map SYSRAM

[olof: Fixed up conflict with a fix for 4212 secondary CPU startup, carrying
over the fix to the reworked code]

* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
  ARM: dts: Add MFC memory banks to exynos5420 boards
  ARM: dts: enable dp-controller for exynos5420-peach-pit board
  ARM: dts: enable fimd for exynos5420 based peach-pit board
  ARM: dts: enable dp-controller for exynos5250-snow board
  ARM: dts: enable fimd for exynos5250-snow board
  ARM: dts: enable pwm backlight for exynos5250-snow
  ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit
  ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow
  ARM: dts: Add PD entry to MFC codec on exynos5420
  ARM: dts: Add sound node for exynos5420-peach-pit board
  ARM: dts: Add sound node for exynos5250-snow board
  ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250
  ARM: dts: Enable support for generic USB DRD phy for exynos5250
  ARM: dts: Enable support for DWC3 controller for exynos5420
  ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420
  ARM: dts: enable hdmi for exynos5420-peach-pit board
  ARM: dts: change to correct compatible string for exynos5420 hdmi
  ARM: dts: enable hdmi for exynos5250 based snow board
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
new file mode 100644
index 0000000..4a0a4f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+		"samsung,exynos4210-sysram" : for Secure SYSRAM
+		"samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
+		};
+	};