Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 98 insertions, 0 deletions

diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
new file mode 100644
index 0000000..29b3f9f
--- /dev/null
+++ b/Documentation/cpu-freq/core.txt
@@ -0,0 +1,98 @@
+     CPU frequency and voltage scaling code in the Linux(TM) kernel
+
+
+		         L i n u x    C P U F r e q
+
+			  C P U F r e q    C o r e
+
+
+		    Dominik Brodowski  <linux@brodo.de>
+		     David Kimdon <dwhedon@debian.org>
+
+
+
+   Clock scaling allows you to change the clock speed of the CPUs on the
+    fly. This is a nice method to save battery power, because the lower
+            the clock speed, the less power the CPU consumes.
+
+
+Contents:
+---------
+1.  CPUFreq core and interfaces
+2.  CPUFreq notifiers
+
+1. General Information
+=======================
+
+The CPUFreq core code is located in linux/kernel/cpufreq.c. This
+cpufreq code offers a standardized interface for the CPUFreq
+architecture drivers (those pieces of code that do actual
+frequency transitions), as well as to "notifiers". These are device
+drivers or other part of the kernel that need to be informed of
+policy changes (ex. thermal modules like ACPI) or of all
+frequency changes (ex. timing code) or even need to force certain
+speed limits (like LCD drivers on ARM architecture). Additionally, the
+kernel "constant" loops_per_jiffy is updated on frequency changes
+here.
+
+Reference counting is done by cpufreq_get_cpu and cpufreq_put_cpu,
+which make sure that the cpufreq processor driver is correctly
+registered with the core, and will not be unloaded until
+cpufreq_put_cpu is called.
+
+2. CPUFreq notifiers
+====================
+
+CPUFreq notifiers conform to the standard kernel notifier interface.
+See linux/include/linux/notifier.h for details on notifiers.
+
+There are two different CPUFreq notifiers - policy notifiers and
+transition notifiers.
+
+
+2.1 CPUFreq policy notifiers
+----------------------------
+
+These are notified when a new policy is intended to be set. Each
+CPUFreq policy notifier is called three times for a policy transition:
+
+1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
+    they see a need for this - may it be thermal considerations or
+    hardware limitations.
+
+2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
+    hardware failure.
+
+3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
+   - if two hardware drivers failed to agree on a new policy before this
+   stage, the incompatible hardware shall be shut down, and the user
+   informed of this.
+
+The phase is specified in the second argument to the notifier.
+
+The third argument, a void *pointer, points to a struct cpufreq_policy
+consisting of five values: cpu, min, max, policy and max_cpu_freq. min 
+and max are the lower and upper frequencies (in kHz) of the new
+policy, policy the new policy, cpu the number of the affected CPU; and 
+max_cpu_freq the maximum supported CPU frequency. This value is given 
+for informational purposes only.
+
+
+2.2 CPUFreq transition notifiers
+--------------------------------
+
+These are notified twice when the CPUfreq driver switches the CPU core
+frequency and this change has any external implications.
+
+The second argument specifies the phase - CPUFREQ_PRECHANGE or
+CPUFREQ_POSTCHANGE.
+
+The third argument is a struct cpufreq_freqs with the following
+values:
+cpu	- number of the affected CPU
+old	- old frequency
+new	- new frequency
+
+If the cpufreq core detects the frequency has changed while the system
+was suspended, these notifiers are called with CPUFREQ_RESUMECHANGE as
+second argument.