[PATCH] VT binding: Add new doc file describing the feature

This newly added file will:

- Describe the characteristics of 2 general types of console drivers
- How to use the sysfs to unbind and bind console drivers
- Uses for this feature

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 127 insertions, 0 deletions

diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
new file mode 100644
index 0000000..4f3f285
--- /dev/null
+++ b/Documentation/console/console.txt
@@ -0,0 +1,127 @@
+Console Drivers
+===============
+
+The linux kernel has 2 general types of console drivers.  The first type is
+assigned by the kernel to all the virtual consoles during the boot process.
+This type will be called 'system driver', and only one system driver is allowed
+to exist. The system driver is persistent and it can never be unloaded, though
+it may become inactive.
+
+The second type has to be explicitly loaded and unloaded. This will be called
+'modular driver' by this document. Multiple modular drivers can coexist at
+any time with each driver sharing the console with other drivers including
+the system driver. However, modular drivers cannot take over the console
+that is currently occupied by another modular driver. (Exception: Drivers that
+call take_over_console() will succeed in the takeover regardless of the type
+of driver occupying the consoles.) They can only take over the console that is
+occupied by the system driver. In the same token, if the modular driver is
+released by the console, the system driver will take over.
+
+Modular drivers, from the programmer's point of view, has to call:
+
+	 take_over_console() - load and bind driver to console layer
+	 give_up_console() - unbind and unload driver
+
+In newer kernels, the following are also available:
+
+	 register_con_driver()
+	 unregister_con_driver()
+
+If sysfs is enabled, the contents of /sys/class/tty/console/backend can be
+examined. This shows the console drivers currently registered by the system. On
+an x86 system with the framebuffer console enabled, the contents of this
+attribute may be like this:
+
+cat /sys/class/tty/console/backend
+0 S: VGA+
+1 B: frame buffer device
+
+The first line shows the VGA console driver, while the second line shows
+the framebuffer console driver.
+
+The leftmost numeric character is the driver ID.  The middle character with
+the colon describes the status of the driver.
+
+    S: - system driver (binding unspecified)
+    B: - bound modular driver
+    U: - unbound modular driver
+
+The last column is the description of the driver.
+
+Under /sys/class/tty/console are two other attributes, 'bind' and
+'unbind'. What does these 2 attributes do? As their name implies, echo'ing the
+driver ID to 'bind' will bind an unbound modular driver, and to 'unbind' will
+unbind a bound modular driver. Echo'ing the ID of a system driver to either
+attribute will do nothing.
+
+Thus:
+
+echo 1 > /sys/class/tty/console/unbind
+cat /sys/class/tty/console/backend
+0 S: VGA+
+1 U: frame buffer device
+
+When unbinding, the modular driver is detached first, and then the system
+driver takes over the consoles vacated by the driver. Binding, on the other
+hand, will bind the driver to the consoles that are currently occupied by a
+system driver.
+
+How useful is this feature? This is very useful for console driver
+developers. By unbinding the driver from the console layer, one can unload the
+driver, make changes, recompile, reload and rebind the driver without any need
+for rebooting the kernel. For regular users who may want to switch from
+framebuffer console to VGA console and vice versa, this feature also makes
+this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
+for more details).
+
+Notes for developers:
+=====================
+
+take_over_console() is now broken up into:
+
+     register_con_driver()
+     bind_con_driver() - private function
+
+give_up_console() is a wrapper to unregister_con_driver(), and a driver must
+be fully unbound for this call to succeed. con_is_bound() will check if the
+driver is bound or not.
+
+Guidelines for console driver writers:
+=====================================
+
+In order for binding to and unbinding from the console to properly work,
+console drivers must follow these guidelines:
+
+1. All drivers, except system drivers, must call either register_con_driver()
+   or take_over_console(). register_con_driver() will just add the driver to
+   the console's internal list. It won't take over the
+   console. take_over_console(), as it name implies, will also take over (or
+   bind to) the console.
+
+2. All resources allocated during con->con_init() must be released in
+   con->con_deinit().
+
+3. All resources allocated in con->con_startup() must be released when the
+   driver, which was previously bound, becomes unbound.  The console layer
+   does not have a complementary call to con->con_startup() so it's up to the
+   driver to check when it's legal to release these resources. Calling
+   con_is_bound() in con->con_deinit() will help.  If the call returned
+   false(), then it's safe to release the resources.  This balance has to be
+   ensured because con->con_startup() can be called again when a request to
+   rebind the driver to the console arrives.
+
+4. Upon exit of the driver, ensure that the driver is totally unbound. If the
+   condition is satisfied, then the driver must call unregister_con_driver()
+   or give_up_console().
+
+5. unregister_con_driver() can also be called on conditions which make it
+   impossible for the driver to service console requests.  This can happen
+   with the framebuffer console that suddenly lost all of its drivers.
+
+The current crop of console drivers should still work correctly, but binding
+and unbinding them may cause problems. With minimal fixes, these drivers can
+be made to work correctly.
+
+==========================
+Antonino Daplas <adaplas@pol.net>
+