summaryrefslogtreecommitdiffstats
path: root/Documentation/arm
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2010-07-12 21:53:28 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-07-27 10:42:38 +0100
commit1dbd30e9890fd69e50b17edd70ca583546b0fe4e (patch)
tree5b5ab74c1792a81340478f7bbccd053e60a23a5e /Documentation/arm
parent07d2a5c721c6aa2bd69812a74c8b3b116abf3e56 (diff)
downloadop-kernel-dev-1dbd30e9890fd69e50b17edd70ca583546b0fe4e.zip
op-kernel-dev-1dbd30e9890fd69e50b17edd70ca583546b0fe4e.tar.gz
ARM: 6225/1: make TCM allocation static and common for all archs
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'Documentation/arm')
-rw-r--r--Documentation/arm/memory.txt8
-rw-r--r--Documentation/arm/tcm.txt30
2 files changed, 26 insertions, 12 deletions
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index eb0fae1..771d48d 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -33,7 +33,13 @@ ffff0000 ffff0fff CPU vector page.
fffe0000 fffeffff XScale cache flush area. This is used
in proc-xscale.S to flush the whole data
- cache. Free for other usage on non-XScale.
+ cache. (XScale does not have TCM.)
+
+fffe8000 fffeffff DTCM mapping area for platforms with
+ DTCM mounted inside the CPU.
+
+fffe0000 fffe7fff ITCM mapping area for platforms with
+ ITCM mounted inside the CPU.
fff00000 fffdffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 77fd937..7c15871 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
system control coprocessor. Documentation from ARM can be found
at http://infocenter.arm.com, search for "TCM Status Register"
to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
There is further a TCM region register (search for "TCM Region
Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using
the MMU, but notice that the TCM if often used in situations where
the MMU is turned off. To avoid confusion the current Linux
implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
TCM is used for a few things:
@@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
memory. Such a heap is great for things like saving
device state when shutting off device power domains.
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
Functions to go into itcm can be tagged like this:
int __tcmfunc foo(int bar);
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
Variables to go into dtcm can be tagged like this:
int __tcmdata foo;
OpenPOWER on IntegriCloud