Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)

1 files changed, 0 insertions, 61 deletions

diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
deleted file mode 100644
index dc460f0..0000000
--- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
+++ /dev/null
@@ -1,61 +0,0 @@
-README on the ADC/Touchscreen Controller
-========================================
-
-The LH79524 and LH7A404 include a built-in Analog to Digital
-controller (ADC) that is used to process input from a touchscreen.
-The driver only implements a four-wire touch panel protocol.
-
-The touchscreen driver is maintenance free except for the pen-down or
-touch threshold.  Some resistive displays and board combinations may
-require tuning of this threshold.  The driver exposes some of its
-internal state in the sys filesystem.  If the kernel is configured
-with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
-directory
-
-  /sys/devices/platform/adc-lh7.0
-
-containing these files.
-
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 samples
-  -rw-r--r--    1 root     root         4096 Jan  1 00:00 threshold
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 threshold_range
-
-The threshold is the current touch threshold.  It defaults to 750 on
-most targets.
-
-  # cat threshold
- 750
-
-The threshold_range contains the range of valid values for the
-threshold.  Values outside of this range will be silently ignored.
-
-  # cat threshold_range
-  0 1023
-
-To change the threshold, write a value to the threshold file.
-
-  # echo 500 > threshold
-  # cat threshold
-  500
-
-The samples file contains the most recently sampled values from the
-ADC.  There are 12.  Below are typical of the last sampled values when
-the pen has been released.  The first two and last two samples are for
-detecting whether or not the pen is down.  The third through sixth are
-X coordinate samples.  The seventh through tenth are Y coordinate
-samples.
-
-  # cat samples
-  1023 1023 0 0 0 0 530 529 530 529 1023 1023
-
-To determine a reasonable threshold, press on the touch panel with an
-appropriate stylus and read the values from samples.
-
-  # cat samples
-  1023 676 92 103 101 102 855 919 922 922 1023 679
-
-The first and eleventh samples are discarded.  Thus, the important
-values are the second and twelfth which are used to determine if the
-pen is down.  When both are below the threshold, the driver registers
-that the pen is down.  When either is above the threshold, it
-registers then pen is up.