summaryrefslogtreecommitdiffstats
path: root/Documentation/arm/SA1100/ADSBitsy
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/arm/SA1100/ADSBitsy
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/arm/SA1100/ADSBitsy')
-rw-r--r--Documentation/arm/SA1100/ADSBitsy43
1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy
new file mode 100644
index 0000000..ab47c38
--- /dev/null
+++ b/Documentation/arm/SA1100/ADSBitsy
@@ -0,0 +1,43 @@
+ADS Bitsy Single Board Computer
+(It is different from Bitsy(iPAQ) of Compaq)
+
+For more details, contact Applied Data Systems or see
+http://www.applieddata.net/products.html
+
+The Linux support for this product has been provided by
+Woojung Huh <whuh@applieddata.net>
+
+Use 'make adsbitsy_config' before any 'make config'.
+This will set up defaults for ADS Bitsy support.
+
+The kernel zImage is linked to be loaded and executed at 0xc0400000.
+
+Linux can be used with the ADS BootLoader that ships with the
+newer rev boards. See their documentation on how to load Linux.
+
+Supported peripherals:
+- SA1100 LCD frame buffer (8/16bpp...sort of)
+- SA1111 USB Master
+- SA1100 serial port
+- pcmcia, compact flash
+- touchscreen(ucb1200)
+- console on LCD screen
+- serial ports (ttyS[0-2])
+ - ttyS0 is default for serial console
+
+To do:
+- everything else! :-)
+
+Notes:
+
+- The flash on board is divided into 3 partitions.
+ You should be careful to use flash on board.
+ It's partition is different from GraphicsClient Plus and GraphicsMaster
+
+- 16bpp mode requires a different cable than what ships with the board.
+ Contact ADS or look through the manual to wire your own. Currently,
+ if you compile with 16bit mode support and switch into a lower bpp
+ mode, the timing is off so the image is corrupted. This will be
+ fixed soon.
+
+Any contribution can be sent to nico@cam.org and will be greatly welcome!
OpenPOWER on IntegriCloud