diff options
author | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2016-09-23 16:26:03 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2016-10-24 08:12:35 -0200 |
commit | 27641b953c54643acfd28fcd9ebbe03cdc724605 (patch) | |
tree | 352c96ff766259e0a7e7aac4372f4807d540668a /Documentation/VGA-softcursor.txt | |
parent | 77514391ee1af3adaa33219109d2ca81fc09e30e (diff) | |
download | op-kernel-dev-27641b953c54643acfd28fcd9ebbe03cdc724605.zip op-kernel-dev-27641b953c54643acfd28fcd9ebbe03cdc724605.tar.gz |
Documentation/VGA-softcursor.txt: convert to ReST markup
- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation/VGA-softcursor.txt')
-rw-r--r-- | Documentation/VGA-softcursor.txt | 73 |
1 files changed, 50 insertions, 23 deletions
diff --git a/Documentation/VGA-softcursor.txt b/Documentation/VGA-softcursor.txt index 70acfbf..9eac674 100644 --- a/Documentation/VGA-softcursor.txt +++ b/Documentation/VGA-softcursor.txt @@ -1,39 +1,66 @@ -Software cursor for VGA by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz> -======================= and Martin Mares <mj@atrey.karlin.mff.cuni.cz> +Software cursor for VGA +======================= - Linux now has some ability to manipulate cursor appearance. Normally, you +by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz> +and Martin Mares <mj@atrey.karlin.mff.cuni.cz> + +Linux now has some ability to manipulate cursor appearance. Normally, you can set the size of hardware cursor (and also work around some ugly bugs in -those miserable Trident cards--see #define TRIDENT_GLITCH in drivers/video/ -vgacon.c). You can now play a few new tricks: you can make your cursor look +those miserable Trident cards [#f1]_. You can now play a few new tricks: +you can make your cursor look + like a non-blinking red block, make it inverse background of the character it's over or to highlight that character and still choose whether the original hardware cursor should remain visible or not. There may be other things I have never thought of. - The cursor appearance is controlled by a "<ESC>[?1;2;3c" escape sequence +The cursor appearance is controlled by a ``<ESC>[?1;2;3c`` escape sequence where 1, 2 and 3 are parameters described below. If you omit any of them, they will default to zeroes. - Parameter 1 specifies cursor size (0=default, 1=invisible, 2=underline, ..., -8=full block) + 16 if you want the software cursor to be applied + 32 if you -want to always change the background color + 64 if you dislike having the -background the same as the foreground. Highlights are ignored for the last two -flags. +first Parameter + specifies cursor size:: + + 0=default + 1=invisible + 2=underline, + ... + 8=full block + + 16 if you want the software cursor to be applied + + 32 if you want to always change the background color + + 64 if you dislike having the background the same as the + foreground. + + Highlights are ignored for the last two flags. + +second parameter + selects character attribute bits you want to change + (by simply XORing them with the value of this parameter). On standard + VGA, the high four bits specify background and the low four the + foreground. In both groups, low three bits set color (as in normal + color codes used by the console) and the most significant one turns + on highlight (or sometimes blinking -- it depends on the configuration + of your VGA). + +third parameter + consists of character attribute bits you want to set. - The second parameter selects character attribute bits you want to change -(by simply XORing them with the value of this parameter). On standard VGA, -the high four bits specify background and the low four the foreground. In both -groups, low three bits set color (as in normal color codes used by the console) -and the most significant one turns on highlight (or sometimes blinking--it -depends on the configuration of your VGA). + Bit setting takes place before bit toggling, so you can simply clear a + bit by including it in both the set mask and the toggle mask. - The third parameter consists of character attribute bits you want to set. -Bit setting takes place before bit toggling, so you can simply clear a bit by -including it in both the set mask and the toggle mask. +.. [#f1] see ``#define TRIDENT_GLITCH`` in ``drivers/video/vgacon.c``. Examples: ========= -To get normal blinking underline, use: echo -e '\033[?2c' -To get blinking block, use: echo -e '\033[?6c' -To get red non-blinking block, use: echo -e '\033[?17;0;64c' +To get normal blinking underline, use:: + + echo -e '\033[?2c' + +To get blinking block, use:: + + echo -e '\033[?6c' + +To get red non-blinking block, use:: + + echo -e '\033[?17;0;64c' |