Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "This series contain:
   - new i2c video drivers: ml86v7667 (video decoder),
                            ths8200 (video encoder)
   - a new video driver for EasyCap cards based on Fushicai USBTV007
   - Improved support for OF and embedded systems, with V4L2 async
     initialization and a better support for clocks
   - API cleanups on the ioctls used by the v4l2 debug tool
   - Lots of cleanups
   - As usual, several driver improvements and new cards additions
   - Revert two changesets that change the minimal symbol rate for
     stv0399, as request by Manu
   - Update MAINTAINERS and other files to point to my new e-mail"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (378 commits)
  MAINTAINERS & ABI: Update to point to my new email
  [media] stb0899: restore minimal rate to 5Mbauds
  [media] exynos4-is: Correct colorspace handling at FIMC-LITE
  [media] exynos4-is: Set valid initial format on FIMC.n subdevs
  [media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads
  [media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev
  [media] exynos4-is: Set valid initial format at FIMC-LITE
  [media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs
  [media] MAINTAINERS: Update S5P/Exynos FIMC driver entry
  [media] Documentation: Update driver's directory in video4linux/fimc.txt
  [media] exynos4-is: Change fimc-is firmware file names
  [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS
  [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver
  [media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms
  [media] media: i2c: tvp514x: remove manual setting of subdev name
  [media] media: i2c: tvp7002: remove manual setting of subdev name
  [media] mem2mem: set missing v4l2_dev pointer
  [media] wl128x: add missing struct v4l2_device
  [media] tvp514x: Fix init seqeunce
  [media] saa7134: Fix sparse warnings by adding __user annotation
  ...

6 files changed, 37 insertions, 346 deletions

diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index f43542a..0c7195e 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2254,7 +2254,7 @@ video encoding.</para>
       <orderedlist>
 	<listitem>
 	  <para>The <constant>VIDIOC_G_CHIP_IDENT</constant> ioctl was renamed
-to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and &VIDIOC-DBG-G-CHIP-IDENT;
+to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and <constant>VIDIOC_DBG_G_CHIP_IDENT</constant>
 was introduced in its place. The old struct <structname>v4l2_chip_ident</structname>
 was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structname>.</para>
 	</listitem>
@@ -2513,6 +2513,16 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.11</title>
+      <orderedlist>
+        <listitem>
+	  <para>Remove obsolete <constant>VIDIOC_DBG_G_CHIP_IDENT</constant> ioctl.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 
@@ -2596,7 +2606,7 @@ and may change in the future.</para>
 ioctls.</para>
         </listitem>
         <listitem>
-	  <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
+	  <para>&VIDIOC-DBG-G-CHIP-INFO; ioctl.</para>
         </listitem>
         <listitem>
 	  <para>&VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index bfe823d..8469fe1 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -141,6 +141,14 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+	<revnumber>3.11</revnumber>
+	<date>2013-05-26</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Remove obsolete VIDIOC_DBG_G_CHIP_IDENT ioctl.
+	</revremark>
+      </revision>
+
+      <revision>
 	<revnumber>3.10</revnumber>
 	<date>2013-03-25</date>
 	<authorinitials>hv</authorinitials>
@@ -493,7 +501,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.10</subtitle>
+ <subtitle>Revision 3.11</subtitle>
 
   <chapter id="common">
     &sub-common;
@@ -547,7 +555,6 @@ and discussions on the V4L mailing list.</revremark>
     <!-- All ioctls go here. -->
     &sub-create-bufs;
     &sub-cropcap;
-    &sub-dbg-g-chip-ident;
     &sub-dbg-g-chip-info;
     &sub-dbg-g-register;
     &sub-decoder-cmd;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml
deleted file mode 100644
index 921e185..0000000
--- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml
+++ /dev/null
@@ -1,271 +0,0 @@
-<refentry id="vidioc-dbg-g-chip-ident">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_DBG_G_CHIP_IDENT</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_DBG_G_CHIP_IDENT</refname>
-    <refpurpose>Identify the chips on a TV card</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dbg_chip_ident
-*<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_DBG_G_CHIP_IDENT</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <note>
-      <title>Experimental</title>
-
-      <para>This is an <link
-linkend="experimental">experimental</link> interface and may change in
-the future.</para>
-    </note>
-
-    <para>For driver debugging purposes this ioctl allows test
-applications to query the driver about the chips present on the TV
-card. Regular applications must not use it. When you found a chip
-specific bug, please contact the linux-media mailing list (&v4l-ml;)
-so it can be fixed.</para>
-
-    <para>To query the driver applications must initialize the
-<structfield>match.type</structfield> and
-<structfield>match.addr</structfield> or <structfield>match.name</structfield>
-fields of a &v4l2-dbg-chip-ident;
-and call <constant>VIDIOC_DBG_G_CHIP_IDENT</constant> with a pointer to
-this structure. On success the driver stores information about the
-selected chip in the <structfield>ident</structfield> and
-<structfield>revision</structfield> fields. On failure the structure
-remains unchanged.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_HOST</constant>,
-<structfield>match.addr</structfield> selects the nth non-&i2c; chip
-on the TV card. You can enumerate all chips by starting at zero and
-incrementing <structfield>match.addr</structfield> by one until
-<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> fails with an &EINVAL;.
-The number zero always selects the host chip, &eg; the chip connected
-to the PCI or USB bus.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>,
-<structfield>match.name</structfield> contains the I2C driver name.
-For instance
-<constant>"saa7127"</constant> will match any chip
-supported by the saa7127 driver, regardless of its &i2c; bus address.
-When multiple chips supported by the same driver are present, the
-ioctl will return <constant>V4L2_IDENT_AMBIGUOUS</constant> in the
-<structfield>ident</structfield> field.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_I2C_ADDR</constant>,
-<structfield>match.addr</structfield> selects a chip by its 7 bit
-&i2c; bus address.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_AC97</constant>,
-<structfield>match.addr</structfield> selects the nth AC97 chip
-on the TV card. You can enumerate all chips by starting at zero and
-incrementing <structfield>match.addr</structfield> by one until
-<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> fails with an &EINVAL;.</para>
-
-    <para>On success, the <structfield>ident</structfield> field will
-contain a chip ID from the Linux
-<filename>media/v4l2-chip-ident.h</filename> header file, and the
-<structfield>revision</structfield> field will contain a driver
-specific value, or zero if no particular revision is associated with
-this chip.</para>
-
-    <para>When the driver could not identify the selected chip,
-<structfield>ident</structfield> will contain
-<constant>V4L2_IDENT_UNKNOWN</constant>. When no chip matched
-the ioctl will succeed but the
-<structfield>ident</structfield> field will contain
-<constant>V4L2_IDENT_NONE</constant>. If multiple chips matched,
-<structfield>ident</structfield> will contain
-<constant>V4L2_IDENT_AMBIGUOUS</constant>. In all these cases the
-<structfield>revision</structfield> field remains unchanged.</para>
-
-    <para>This ioctl is optional, not all drivers may support it. It
-was introduced in Linux 2.6.21, but the API was changed to the
-one described here in 2.6.29.</para>
-
-    <para>We recommended the <application>v4l2-dbg</application>
-utility over calling this ioctl directly. It is available from the
-LinuxTV v4l-dvb repository; see <ulink
-url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
-access instructions.</para>
-
-    <!-- Note for convenience vidioc-dbg-g-register.sgml
-	 contains a duplicate of this table. -->
-    <table pgwide="1" frame="none" id="ident-v4l2-dbg-match">
-      <title>struct <structname>v4l2_dbg_match</structname></title>
-      <tgroup cols="4">
-	&cs-ustr;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>type</structfield></entry>
-	    <entry>See <xref linkend="ident-chip-match-types" /> for a list of
-possible types.</entry>
-	  </row>
-	  <row>
-	    <entry>union</entry>
-	    <entry>(anonymous)</entry>
-	  </row>
-	  <row>
-	    <entry></entry>
-	    <entry>__u32</entry>
-	    <entry><structfield>addr</structfield></entry>
-	    <entry>Match a chip by this number, interpreted according
-to the <structfield>type</structfield> field.</entry>
-	  </row>
-	  <row>
-	    <entry></entry>
-	    <entry>char</entry>
-	    <entry><structfield>name[32]</structfield></entry>
-	    <entry>Match a chip by this name, interpreted according
-to the <structfield>type</structfield> field.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <table pgwide="1" frame="none" id="v4l2-dbg-chip-ident">
-      <title>struct <structname>v4l2_dbg_chip_ident</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>struct v4l2_dbg_match</entry>
-	    <entry><structfield>match</structfield></entry>
-	    <entry>How to match the chip, see <xref linkend="ident-v4l2-dbg-match" />.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>ident</structfield></entry>
-	    <entry>A chip identifier as defined in the Linux
-<filename>media/v4l2-chip-ident.h</filename> header file, or one of
-the values from <xref linkend="chip-ids" />.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>revision</structfield></entry>
-	    <entry>A chip revision, chip and driver specific.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <!-- Note for convenience vidioc-dbg-g-register.sgml
-	 contains a duplicate of this table. -->
-    <table pgwide="1" frame="none" id="ident-chip-match-types">
-      <title>Chip Match Types</title>
-      <tgroup cols="3">
-	&cs-def;
-	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
-	    <entry>0</entry>
-	    <entry>Match the nth chip on the card, zero for the
-	    bridge chip. Does not match sub-devices.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
-	    <entry>1</entry>
-	    <entry>Match an &i2c; chip by its driver name.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry>
-	    <entry>2</entry>
-	    <entry>Match a chip by its 7 bit &i2c; bus address.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry>
-	    <entry>3</entry>
-	    <entry>Match the nth anciliary AC97 chip.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
-	    <entry>4</entry>
-	    <entry>Match the nth sub-device. Can't be used with this ioctl.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <!-- This is an anonymous enum in media/v4l2-chip-ident.h. -->
-    <table pgwide="1" frame="none" id="chip-ids">
-      <title>Chip Identifiers</title>
-      <tgroup cols="3">
-	&cs-def;
-	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_IDENT_NONE</constant></entry>
-	    <entry>0</entry>
-	    <entry>No chip matched.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_IDENT_AMBIGUOUS</constant></entry>
-	    <entry>1</entry>
-	    <entry>Multiple chips matched.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_IDENT_UNKNOWN</constant></entry>
-	    <entry>2</entry>
-	    <entry>A chip is present at this address, but the driver
-could not identify it.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The <structfield>match_type</structfield> is invalid.</para>
-	</listitem>
-      </varlistentry>
-     </variablelist>
-  </refsect1>
-</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml
index e1cece6..4c4603c 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml
@@ -73,8 +73,7 @@ fields of a &v4l2-dbg-chip-info;
 and call <constant>VIDIOC_DBG_G_CHIP_INFO</constant> with a pointer to
 this structure. On success the driver stores information about the
 selected chip in the <structfield>name</structfield> and
-<structfield>flags</structfield> fields. On failure the structure
-remains unchanged.</para>
+<structfield>flags</structfield> fields.</para>
 
     <para>When <structfield>match.type</structfield> is
 <constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
@@ -132,7 +131,7 @@ to the <structfield>type</structfield> field.</entry>
 	    <entry>char</entry>
 	    <entry><structfield>name[32]</structfield></entry>
 	    <entry>Match a chip by this name, interpreted according
-to the <structfield>type</structfield> field.</entry>
+to the <structfield>type</structfield> field. Currently unused.</entry>
 	  </row>
 	</tbody>
       </tgroup>
@@ -183,21 +182,6 @@ is set, then the driver supports reading registers from the device. If
 	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
-	    <entry>1</entry>
-	    <entry>Match an &i2c; chip by its driver name. Can't be used with this ioctl.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry>
-	    <entry>2</entry>
-	    <entry>Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry>
-	    <entry>3</entry>
-	    <entry>Match the nth anciliary AC97 chip. Can't be used with this ioctl.</entry>
-	  </row>
-	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
 	    <entry>4</entry>
 	    <entry>Match the nth sub-device.</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
index d13bac9..3d038e7 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
@@ -76,7 +76,7 @@ compiled with the <constant>CONFIG_VIDEO_ADV_DEBUG</constant> option
 to enable these ioctls.</para>
 
     <para>To write a register applications must initialize all fields
-of a &v4l2-dbg-register; and call
+of a &v4l2-dbg-register; except for <structfield>size</structfield> and call
 <constant>VIDIOC_DBG_S_REGISTER</constant> with a pointer to this
 structure. The <structfield>match.type</structfield> and
 <structfield>match.addr</structfield> or <structfield>match.name</structfield>
@@ -91,8 +91,8 @@ written into the register.</para>
 <structfield>reg</structfield> fields, and call
 <constant>VIDIOC_DBG_G_REGISTER</constant> with a pointer to this
 structure. On success the driver stores the register value in the
-<structfield>val</structfield> field. On failure the structure remains
-unchanged.</para>
+<structfield>val</structfield> field and the size (in bytes) of the
+value in <structfield>size</structfield>.</para>
 
     <para>When <structfield>match.type</structfield> is
 <constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
@@ -102,39 +102,9 @@ chip connected to the PCI or USB bus. You can find out which chips are
 present with the &VIDIOC-DBG-G-CHIP-INFO; ioctl.</para>
 
     <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>,
-<structfield>match.name</structfield> contains the I2C driver name.
-For instance
-<constant>"saa7127"</constant> will match any chip
-supported by the saa7127 driver, regardless of its &i2c; bus address.
-When multiple chips supported by the same driver are present, the
-effect of these ioctls is undefined. Again with the
-&VIDIOC-DBG-G-CHIP-INFO; ioctl you can find out which &i2c; chips are
-present.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_I2C_ADDR</constant>,
-<structfield>match.addr</structfield> selects a chip by its 7 bit &i2c;
-bus address.</para>
-
-    <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_AC97</constant>,
-<structfield>match.addr</structfield> selects the nth AC97 chip
-on the TV card.</para>
-
-    <para>When <structfield>match.type</structfield> is
 <constant>V4L2_CHIP_MATCH_SUBDEV</constant>,
 <structfield>match.addr</structfield> selects the nth sub-device.</para>
 
-    <note>
-      <title>Success not guaranteed</title>
-
-      <para>Due to a flaw in the Linux &i2c; bus driver these ioctls may
-return successfully without actually reading or writing a register. To
-catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-INFO;
-call confirming the presence of the selected &i2c; chip.</para>
-    </note>
-
     <para>These ioctls are optional, not all drivers may support them.
 However when a driver supports these ioctls it must also support
 &VIDIOC-DBG-G-CHIP-INFO;. Conversely it may support
@@ -150,7 +120,7 @@ LinuxTV v4l-dvb repository; see <ulink
 url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
 access instructions.</para>
 
-    <!-- Note for convenience vidioc-dbg-g-chip-ident.sgml
+    <!-- Note for convenience vidioc-dbg-g-chip-info.sgml
 	 contains a duplicate of this table. -->
     <table pgwide="1" frame="none" id="v4l2-dbg-match">
       <title>struct <structname>v4l2_dbg_match</structname></title>
@@ -160,7 +130,7 @@ access instructions.</para>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>type</structfield></entry>
-	    <entry>See <xref linkend="ident-chip-match-types" /> for a list of
+	    <entry>See <xref linkend="chip-match-types" /> for a list of
 possible types.</entry>
 	  </row>
 	  <row>
@@ -179,7 +149,7 @@ to the <structfield>type</structfield> field.</entry>
 	    <entry>char</entry>
 	    <entry><structfield>name[32]</structfield></entry>
 	    <entry>Match a chip by this name, interpreted according
-to the <structfield>type</structfield> field.</entry>
+to the <structfield>type</structfield> field. Currently unused.</entry>
 	  </row>
 	</tbody>
       </tgroup>
@@ -199,6 +169,11 @@ to the <structfield>type</structfield> field.</entry>
 	    <entry>How to match the chip, see <xref linkend="v4l2-dbg-match" />.</entry>
 	  </row>
 	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>size</structfield></entry>
+	    <entry>The register size in bytes.</entry>
+	  </row>
+	  <row>
 	    <entry>__u64</entry>
 	    <entry><structfield>reg</structfield></entry>
 	    <entry>A register number.</entry>
@@ -213,7 +188,7 @@ register.</entry>
       </tgroup>
     </table>
 
-    <!-- Note for convenience vidioc-dbg-g-chip-ident.sgml
+    <!-- Note for convenience vidioc-dbg-g-chip-info.sgml
 	 contains a duplicate of this table. -->
     <table pgwide="1" frame="none" id="chip-match-types">
       <title>Chip Match Types</title>
@@ -227,21 +202,6 @@ register.</entry>
 	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
-	    <entry>1</entry>
-	    <entry>Match an &i2c; chip by its driver name.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry>
-	    <entry>2</entry>
-	    <entry>Match a chip by its 7 bit &i2c; bus address.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry>
-	    <entry>3</entry>
-	    <entry>Match the nth anciliary AC97 chip.</entry>
-	  </row>
-	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
 	    <entry>4</entry>
 	    <entry>Match the nth sub-device.</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml
index fe80a18..2223485 100644
--- a/Documentation/DocBook/media/v4l/vidioc-querystd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml
@@ -54,7 +54,8 @@ standard automatically. To do so, applications call <constant>
 VIDIOC_QUERYSTD</constant> with a pointer to a &v4l2-std-id; type. The
 driver stores here a set of candidates, this can be a single flag or a
 set of supported standards if for example the hardware can only
-distinguish between 50 and 60 Hz systems. When detection is not
+distinguish between 50 and 60 Hz systems. If no signal was detected,
+then the driver will return V4L2_STD_UNKNOWN. When detection is not
 possible or fails, the set must contain all standards supported by the
 current video input or output.</para>