diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-06 12:22:06 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-23 19:06:33 -0200 |
commit | 9569793a79836320c33d400c686dcb78f886bdad (patch) | |
tree | f5f74bf91f829172490b7778230322a5f7a51a57 /Documentation/DocBook/media | |
parent | f167e302c6a1321ae9f4d3a24a6e5bac90a5c79d (diff) | |
download | op-kernel-dev-9569793a79836320c33d400c686dcb78f886bdad.zip op-kernel-dev-9569793a79836320c33d400c686dcb78f886bdad.tar.gz |
[media] dvb: Add DVBv5 statistics properties
The DVBv3 statistics parameters are limited on several ways:
- It doesn't provide any way to indicate the used measure,
so userspace need to guess how to calculate/use it;
- Only a limited set of stats are supported;
- Can't be called in a way to require them to be filled
all at once (atomic reads from the hardware), with may
cause troubles on interpreting them on userspace;
- On some OFDM delivery systems, the carriers can be
independently modulated, having different properties.
Currently, there's no way to report per-layer stats.
To address the above issues, adding a new DVBv5-based stats API.
While here, correct inner code nomenclature on a few places.
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'Documentation/DocBook/media')
-rw-r--r-- | Documentation/DocBook/media/dvb/dvbapi.xml | 2 | ||||
-rw-r--r-- | Documentation/DocBook/media/dvb/dvbproperty.xml | 180 | ||||
-rw-r--r-- | Documentation/DocBook/media/dvb/frontend.xml | 2 |
3 files changed, 181 insertions, 3 deletions
diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml index 757488b2..0197bcc 100644 --- a/Documentation/DocBook/media/dvb/dvbapi.xml +++ b/Documentation/DocBook/media/dvb/dvbapi.xml @@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher <title>LINUX DVB API</title> -<subtitle>Version 5.8</subtitle> +<subtitle>Version 5.10</subtitle> <!-- ADD THE CHAPTERS HERE --> <chapter id="dvb_introdution"> &sub-intro; diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 957e3ac..4a5eaee 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -7,14 +7,41 @@ the capability ioctls weren't implemented yet via the new way.</para> <para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant> API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters"> struct <constant>dvb_frontend_parameters</constant></link> were used.</para> +<section id="dtv-stats"> +<title>DTV stats type</title> +<programlisting> +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 1/1000 dB measures */ + }; +} __packed; +</programlisting> +</section> +<section id="dtv-fe-stats"> +<title>DTV stats type</title> +<programlisting> +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __packed; +</programlisting> +</section> + <section id="dtv-property"> <title>DTV property type</title> <programlisting> /* Reserved fields should be set to 0 */ + struct dtv_property { __u32 cmd; + __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; @@ -440,7 +467,7 @@ typedef enum fe_delivery_system { <title><constant>DTV-ISDBT-LAYER*</constant> parameters</title> <para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in ISDB-T hierarchical layers can be decoded simultaneously. For that - reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para> + reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.</para> <para>ISDB-T has 3 hierarchical layers which each can use a part of the available segments. The total number of segments over all layers has to 13 in ISDB-T.</para> @@ -850,6 +877,147 @@ enum fe_interleaving { <para>use the special macro LNA_AUTO to set LNA auto</para> </section> </section> + + <section id="frontend-stat-properties"> + <title>Frontend statistics indicators</title> + <para>The values are returned via <constant>dtv_property.stat</constant>. + If the property is supported, <constant>dtv_property.stat.len</constant> is bigger than zero.</para> + <para>For most delivery systems, <constant>dtv_property.stat.len</constant> + will be 1 if the stats is supported, and the properties will + return a single value for each parameter.</para> + <para>It should be noticed, however, that new OFDM delivery systems + like ISDB can use different modulation types for each group of + carriers. On such standards, up to 3 groups of statistics can be + provided, and <constant>dtv_property.stat.len</constant> is updated + to reflect the "global" metrics, plus one metric per each carrier + group (called "layer" on ISDB).</para> + <para>So, in order to be consistent with other delivery systems, the first + value at <link linkend="dtv-stats"><constant>dtv_property.stat.dtv_stats</constant></link> + array refers to the global metric. The other elements of the array + represent each layer, starting from layer A(index 1), + layer B (index 2) and so on.</para> + <para>The number of filled elements are stored at <constant>dtv_property.stat.len</constant>.</para> + <para>Each element of the <constant>dtv_property.stat.dtv_stats</constant> array consists on two elements:</para> + <itemizedlist mark='opencircle'> + <listitem><para><constant>svalue</constant> or <constant>uvalue</constant>, where + <constant>svalue</constant> is for signed values of the measure (dB measures) + and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem> + <listitem><para><constant>scale</constant> - Scale for the value. It can be:</para> + <section id = "fecap-scale-params"> + <itemizedlist mark='bullet'> + <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem> + <listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem> + <listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem> + <listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem> + </itemizedlist> + </section> + </listitem> + </itemizedlist> + <section id="DTV-STAT-SIGNAL-STRENGTH"> + <title><constant>DTV_STAT_SIGNAL_STRENGTH</constant></title> + <para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem> + <listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-CNR"> + <title><constant>DTV_STAT_CNR</constant></title> + <para>Indicates the Signal to Noise ratio for the main carrier.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem> + <listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-PRE-ERROR-BIT-COUNT"> + <title><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></title> + <para>Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code).</para> + <para>This measure is taken during the same interval as <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant>.</para> + <para>In order to get the BER (Bit Error Rate) measurement, it should be divided by + <link linkend="DTV-STAT-PRE-TOTAL-BIT-COUNT"><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></link>.</para> + <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-PRE-TOTAL-BIT-COUNT"> + <title><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></title> + <para>Measures the amount of bits received before the inner code block, during the same period as + <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para> + <para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, + as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para> + <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring + <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-POST-ERROR-BIT-COUNT"> + <title><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></title> + <para>Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code).</para> + <para>This measure is taken during the same interval as <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant>.</para> + <para>In order to get the BER (Bit Error Rate) measurement, it should be divided by + <link linkend="DTV-STAT-POST-TOTAL-BIT-COUNT"><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></link>.</para> + <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-POST-TOTAL-BIT-COUNT"> + <title><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></title> + <para>Measures the amount of bits received after the inner coding, during the same period as + <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para> + <para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, + as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para> + <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring + <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-ERROR-BLOCK-COUNT"> + <title><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></title> + <para>Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code).</para> + <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem> + </itemizedlist> + </section> + <section id="DTV-STAT-TOTAL-BLOCK-COUNT"> + <title><constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant></title> + <para>Measures the total number of blocks received during the same period as + <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> measurement was taken.</para> + <para>It can be used to calculate the PER indicator, by dividing + <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> + by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para> + <para>Possible scales for this metric are:</para> + <itemizedlist mark='bullet'> + <listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem> + <listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring + <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem> + </itemizedlist> + </section> + </section> + <section id="frontend-property-terrestrial-systems"> <title>Properties used on terrestrial delivery systems</title> <section id="dvbt-params"> @@ -871,6 +1039,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem> <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="dvbt2-params"> <title>DVB-T2 delivery system</title> @@ -895,6 +1064,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem> <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="isdbt"> <title>ISDB-T delivery system</title> @@ -948,6 +1118,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="atsc-params"> <title>ATSC delivery system</title> @@ -961,6 +1132,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="atscmh-params"> <title>ATSC-MH delivery system</title> @@ -988,6 +1160,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem> <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="dtmb-params"> <title>DTMB delivery system</title> @@ -1007,6 +1180,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem> <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> </section> <section id="frontend-property-cable-systems"> @@ -1028,6 +1202,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem> <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="dvbc-annex-b-params"> <title>DVB-C Annex B delivery system</title> @@ -1043,6 +1218,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> </section> <section id="frontend-property-satellital-systems"> @@ -1062,6 +1238,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem> <listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> <para>Future implementations might add those two missing parameters:</para> <itemizedlist mark='opencircle'> <listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem> @@ -1077,6 +1254,7 @@ enum fe_interleaving { <listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem> <listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem> </itemizedlist> + <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> </section> <section id="turbo-params"> <title>Turbo code delivery system</title> diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 426c252..df39ba3 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -230,7 +230,7 @@ typedef enum fe_status { <entry align="char">The frontend has found a DVB signal</entry> </row><row> <entry align="char">FE_HAS_VITERBI</entry> -<entry align="char">The frontend FEC code is stable</entry> +<entry align="char">The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable</entry> </row><row> <entry align="char">FE_HAS_SYNC</entry> <entry align="char">Syncronization bytes was found</entry> |