[media] DocBook validation fixes

More validation fixes as reported by xmllint.

There are still three xmllint errors after this remaining regarding SVG file support.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 223 insertions, 224 deletions

diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 41cd801..93b9c68 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3717,232 +3717,231 @@ interface and may change in the future.</para>
 	    use case involving camera or individually.
 	  </para>
 
-	</section>
 
+          <table pgwide="1" frame="none" id="flash-control-id">
+          <title>Flash Control IDs</title>
+    
+          <tgroup cols="4">
+    	<colspec colname="c1" colwidth="1*" />
+    	<colspec colname="c2" colwidth="6*" />
+    	<colspec colname="c3" colwidth="2*" />
+    	<colspec colname="c4" colwidth="6*" />
+    	<spanspec namest="c1" nameend="c2" spanname="id" />
+    	<spanspec namest="c2" nameend="c4" spanname="descr" />
+    	<thead>
+    	  <row>
+    	    <entry spanname="id" align="left">ID</entry>
+    	    <entry align="left">Type</entry>
+    	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+    	  </row>
+    	</thead>
+    	<tbody valign="top">
+    	  <row><entry></entry></row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry>
+    	    <entry>class</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">The FLASH class descriptor.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry>
+    	    <entry>menu</entry>
+    	  </row>
+    	  <row id="v4l2-flash-led-mode">
+    	    <entry spanname="descr">Defines the mode of the flash LED,
+    	    the high-power white LED attached to the flash controller.
+    	    Setting this control may not be possible in presence of
+    	    some faults. See V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry>
+    		  <entry>Off.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry>
+    		  <entry>Flash mode.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry>
+    		  <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry>
+    	    <entry>menu</entry>
+    	  </row>
+    	  <row id="v4l2-flash-strobe-source"><entry
+    	  spanname="descr">Defines the source of the flash LED
+    	  strobe.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry>
+    		  <entry>The flash strobe is triggered by using
+    		  the V4L2_CID_FLASH_STROBE control.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry>
+    		  <entry>The flash strobe is triggered by an
+    		  external source. Typically this is a sensor,
+    		  which makes it possible to synchronises the
+    		  flash strobe start to exposure start.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry>
+    	    <entry>button</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Strobe flash. Valid when
+    	    V4L2_CID_FLASH_LED_MODE is set to
+    	    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
+    	    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
+    	    control may not be possible in presence of some faults.
+    	    See V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry>
+    	    <entry>button</entry>
+    	  </row>
+    	  <row><entry spanname="descr">Stop flash strobe immediately.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Strobe status: whether the flash
+    	    is strobing at the moment or not. This is a read-only
+    	    control.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Hardware timeout for flash. The
+    	    flash strobe is stopped after this period of time has
+    	    passed from the start of the strobe.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the flash strobe when
+    	    the flash LED is in flash mode
+    	    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps
+    	    (mA) if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the flash LED in
+    	    torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be
+    	    milliamps (mA) if possible. Setting this control may not
+    	    be possible in presence of some faults. See
+    	    V4L2_CID_FLASH_FAULT.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry>
+    	    <entry>integer</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Intensity of the indicator LED.
+    	    The indicator LED may be fully independent of the flash
+    	    LED. The unit should be microamps (uA) if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry>
+    	    <entry>bitmask</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Faults related to the flash. The
+    	    faults tell about specific problems in the flash chip
+    	    itself or the LEDs attached to it. Faults may prevent
+    	    further use of some of the flash controls. In particular,
+    	    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
+    	    if the fault affects the flash LED. Exactly which faults
+    	    have such an effect is chip dependent. Reading the faults
+    	    resets the control and returns the chip to a usable state
+    	    if possible.</entry>
+    	  </row>
+    	  <row>
+    	    <entrytbl spanname="descr" cols="2">
+    	      <tbody valign="top">
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry>
+    		  <entry>Flash controller voltage to the flash LED
+    		  has exceeded the limit specific to the flash
+    		  controller.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry>
+    		  <entry>The flash strobe was still on when
+    		  the timeout set by the user ---
+    		  V4L2_CID_FLASH_TIMEOUT control --- has expired.
+    		  Not all flash controllers may set this in all
+    		  such conditions.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry>
+    		  <entry>The flash controller has overheated.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry>
+    		  <entry>The short circuit protection of the flash
+    		  controller has been triggered.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
+    		  <entry>Current in the LED power supply has exceeded the limit
+    		  specific to the flash controller.</entry>
+    		</row>
+    		<row>
+    		  <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
+    		  <entry>The flash controller has detected a short or open
+    		  circuit condition on the indicator LED.</entry>
+    		</row>
+    	      </tbody>
+    	    </entrytbl>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row><entry spanname="descr">Enable or disable charging of the xenon
+    	  flash capacitor.</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry>
+    	    <entry>boolean</entry>
+    	  </row>
+    	  <row>
+    	    <entry spanname="descr">Is the flash ready to strobe?
+    	    Xenon flashes require their capacitors charged before
+    	    strobing. LED flashes often require a cooldown period
+    	    after strobe during which another strobe will not be
+    	    possible. This is a read-only control.</entry>
+    	  </row>
+    	  <row><entry></entry></row>
+    	</tbody>
+          </tgroup>
+          </table>
+	</section>
       </section>
-
-      <table pgwide="1" frame="none" id="flash-control-id">
-      <title>Flash Control IDs</title>
-
-      <tgroup cols="4">
-	<colspec colname="c1" colwidth="1*" />
-	<colspec colname="c2" colwidth="6*" />
-	<colspec colname="c3" colwidth="2*" />
-	<colspec colname="c4" colwidth="6*" />
-	<spanspec namest="c1" nameend="c2" spanname="id" />
-	<spanspec namest="c2" nameend="c4" spanname="descr" />
-	<thead>
-	  <row>
-	    <entry spanname="id" align="left">ID</entry>
-	    <entry align="left">Type</entry>
-	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
-	  </row>
-	</thead>
-	<tbody valign="top">
-	  <row><entry></entry></row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry>
-	    <entry>class</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">The FLASH class descriptor.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry>
-	    <entry>menu</entry>
-	  </row>
-	  <row id="v4l2-flash-led-mode">
-	    <entry spanname="descr">Defines the mode of the flash LED,
-	    the high-power white LED attached to the flash controller.
-	    Setting this control may not be possible in presence of
-	    some faults. See V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry>
-		  <entry>Off.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry>
-		  <entry>Flash mode.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry>
-		  <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry>
-	    <entry>menu</entry>
-	  </row>
-	  <row id="v4l2-flash-strobe-source"><entry
-	  spanname="descr">Defines the source of the flash LED
-	  strobe.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry>
-		  <entry>The flash strobe is triggered by using
-		  the V4L2_CID_FLASH_STROBE control.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry>
-		  <entry>The flash strobe is triggered by an
-		  external source. Typically this is a sensor,
-		  which makes it possible to synchronises the
-		  flash strobe start to exposure start.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry>
-	    <entry>button</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Strobe flash. Valid when
-	    V4L2_CID_FLASH_LED_MODE is set to
-	    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
-	    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
-	    control may not be possible in presence of some faults.
-	    See V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry>
-	    <entry>button</entry>
-	  </row>
-	  <row><entry spanname="descr">Stop flash strobe immediately.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Strobe status: whether the flash
-	    is strobing at the moment or not. This is a read-only
-	    control.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Hardware timeout for flash. The
-	    flash strobe is stopped after this period of time has
-	    passed from the start of the strobe.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the flash strobe when
-	    the flash LED is in flash mode
-	    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps
-	    (mA) if possible.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the flash LED in
-	    torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be
-	    milliamps (mA) if possible. Setting this control may not
-	    be possible in presence of some faults. See
-	    V4L2_CID_FLASH_FAULT.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry>
-	    <entry>integer</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Intensity of the indicator LED.
-	    The indicator LED may be fully independent of the flash
-	    LED. The unit should be microamps (uA) if possible.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry>
-	    <entry>bitmask</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Faults related to the flash. The
-	    faults tell about specific problems in the flash chip
-	    itself or the LEDs attached to it. Faults may prevent
-	    further use of some of the flash controls. In particular,
-	    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
-	    if the fault affects the flash LED. Exactly which faults
-	    have such an effect is chip dependent. Reading the faults
-	    resets the control and returns the chip to a usable state
-	    if possible.</entry>
-	  </row>
-	  <row>
-	    <entrytbl spanname="descr" cols="2">
-	      <tbody valign="top">
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry>
-		  <entry>Flash controller voltage to the flash LED
-		  has exceeded the limit specific to the flash
-		  controller.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry>
-		  <entry>The flash strobe was still on when
-		  the timeout set by the user ---
-		  V4L2_CID_FLASH_TIMEOUT control --- has expired.
-		  Not all flash controllers may set this in all
-		  such conditions.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry>
-		  <entry>The flash controller has overheated.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry>
-		  <entry>The short circuit protection of the flash
-		  controller has been triggered.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
-		  <entry>Current in the LED power supply has exceeded the limit
-		  specific to the flash controller.</entry>
-		</row>
-		<row>
-		  <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
-		  <entry>The flash controller has detected a short or open
-		  circuit condition on the indicator LED.</entry>
-		</row>
-	      </tbody>
-	    </entrytbl>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row><entry spanname="descr">Enable or disable charging of the xenon
-	  flash capacitor.</entry>
-	  </row>
-	  <row>
-	    <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry>
-	    <entry>boolean</entry>
-	  </row>
-	  <row>
-	    <entry spanname="descr">Is the flash ready to strobe?
-	    Xenon flashes require their capacitors charged before
-	    strobing. LED flashes often require a cooldown period
-	    after strobe during which another strobe will not be
-	    possible. This is a read-only control.</entry>
-	  </row>
-	  <row><entry></entry></row>
-	</tbody>
-      </tgroup>
-      </table>
     </section>
 
     <section id="jpeg-controls">