summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-03 11:37:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-03 11:37:57 -0700
commit751144271f4b63d5de9005ea4e5e6e5c7c6fd629 (patch)
tree2e5cb8223d4f6146f01f123a9f33cf6d468205c6 /Documentation/ABI
parent542a086ac72fb193cbc1b996963a572269e57743 (diff)
parent91121c103ae93ef117e58712786864270d7f488e (diff)
downloadop-kernel-dev-751144271f4b63d5de9005ea4e5e6e5c7c6fd629.zip
op-kernel-dev-751144271f4b63d5de9005ea4e5e6e5c7c6fd629.tar.gz
Merge tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree merge from Greg KH: "Here's the bit staging tree pull request for 3.12-rc1. Lots of staging driver updates, and fixes. Lustre is finally enabled in the build, and lots of cleanup started happening in it. There's a new wireless driver in here, and 2 new TTY drivers, which cause the overall lines added/removed to be quite large on the "added" side. The IIO driver updates are also coming through here, as they are tied to the staging iio drivers" * tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits) staging: dwc2: make dwc2_core_params documentation more complete staging: dwc2: validate the value for phy_utmi_width staging: dwc2: interpret all hwcfg and related register at init time staging: dwc2: properly mask the GRXFSIZ register staging: dwc2: remove redundant register reads staging: dwc2: re-use hptxfsiz variable staging: dwc2: simplify debug output in dwc_hc_init staging: dwc2: add missing shift staging: dwc2: simplify register shift expressions staging: dwc2: only read the snpsid register once staging: dwc2: unshift non-bool register value constants staging: dwc2: fix off-by-one in check for max_packet_count parameter staging: dwc2: remove specific fifo size constants Staging:BCM:DDRInit.c:Renaming __FUNCTION__ staging: bcm: remove Version.h file. staging: rtl8188eu: off by one in rtw_set_802_11_add_wep() staging: r8188eu: copying one byte too much staging: rtl8188eu: || vs && typo staging: r8188eu: off by one bugs staging: crystalhd: Resolve sparse 'different base types' warnings. ...
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio19
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-ad95238
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-adf43502
3 files changed, 20 insertions, 9 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index dda81ff..39c8de0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -351,6 +351,7 @@ Description:
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+ 500kohm_to_gnd: connected to ground via a 500kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
@@ -792,3 +793,21 @@ Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to read the amount of quadrature error
present in the device at a given time.
+
+What: /sys/.../iio:deviceX/in_accelX_power_mode
+KernelVersion: 3.11
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the chip power mode.
+ low_noise: reduce noise level from ADC,
+ low_power: enable low current consumption.
+ For a list of available output power modes read
+ in_accel_power_mode_available.
+
+What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Writing '1' stores the current device configuration into
+ on-chip EEPROM. After power-up or chip reset the device will
+ automatically load the saved configuration.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
index 2ce9c3f..a91aeab 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -18,14 +18,6 @@ Description:
Reading returns either '1' or '0'. '1' means that the
pllY is locked.
-What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
-KernelVersion: 3.4.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Writing '1' stores the current device configuration into
- on-chip EEPROM. After power-up or chip reset the device will
- automatically load the saved configuration.
-
What: /sys/bus/iio/devices/iio:deviceX/sync_dividers
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
index d89aded..1254457 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
@@ -18,4 +18,4 @@ Description:
adjust the reference frequency accordingly.
The value written has no effect until out_altvoltageY_frequency
is updated. Consider to use out_altvoltageY_powerdown to power
- down the PLL and it's RFOut buffers during REFin changes.
+ down the PLL and its RFOut buffers during REFin changes.
OpenPOWER on IntegriCloud