cxl: Add image control to sysfs

load_image_on_perst identifies whether a PERST will cause the image to be
flashed to the card. And if so, which image.

Valid entries are: "none", "user" and "factory".

A value of "none" means PERST will not cause the image to be flashed. A
power cycle to the pcie slot is required to load the image.

"user" loads the user provided image and "factory" loads the factory image upon
PERST.

sysfs updates the cxl struct in the driver then calls cxl_update_image_control
to write the vals in the VSEC.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 14 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 2ab9752..5941ff3 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -132,3 +132,17 @@ Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
                 Will return "user" or "factory" depending on the image loaded
                 onto the card.
+
+What:           /sys/class/cxl/<card>/load_image_on_perst
+Date:           December 2014
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read/write
+                Valid entries are "none", "user", and "factory".
+                "none" means PERST will not cause image to be loaded to the
+                card.  A power cycle is required to load the image.
+                "none" could be useful for debugging because the trace arrays
+                are preserved.
+                "user" and "factory" means PERST will cause either the user or
+                user or factory image to be loaded.
+                Default is to reload on PERST whichever image the card has
+                loaded.