summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-04 21:35:12 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-04 21:35:12 -0800
commitfd0d351de7bbd718bc2b34d5846854831aa2b88c (patch)
treeb4630c372215deb2e17235707189f06603bee3a3
parent3d6f47801c34e42da26e2b6b29706f0bfe423978 (diff)
parente052c6d15c61cc4caff2f06cbca72b183da9f15e (diff)
downloadop-kernel-dev-fd0d351de7bbd718bc2b34d5846854831aa2b88c.zip
op-kernel-dev-fd0d351de7bbd718bc2b34d5846854831aa2b88c.tar.gz
Merge tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt3
-rw-r--r--Documentation/kernel-parameters.txt7
-rw-r--r--Documentation/serial/driver10
-rw-r--r--Documentation/serial/tty.txt60
-rw-r--r--arch/arm64/include/asm/dcc.h55
-rw-r--r--drivers/char/pcmcia/synclink_cs.c9
-rw-r--r--drivers/dma/hsu/Kconfig9
-rw-r--r--drivers/dma/hsu/hsu.c24
-rw-r--r--drivers/dma/hsu/hsu.h1
-rw-r--r--drivers/dma/hsu/pci.c2
-rw-r--r--drivers/isdn/i4l/isdn_tty.c2
-rw-r--r--drivers/tty/cyclades.c9
-rw-r--r--drivers/tty/hvc/Kconfig2
-rw-r--r--drivers/tty/hvc/hvc_console.c20
-rw-r--r--drivers/tty/hvc/hvc_dcc.c15
-rw-r--r--drivers/tty/hvc/hvcs.c2
-rw-r--r--drivers/tty/mips_ejtag_fdc.c39
-rw-r--r--drivers/tty/n_r3964.c28
-rw-r--r--drivers/tty/n_tty.c32
-rw-r--r--drivers/tty/pty.c7
-rw-r--r--drivers/tty/rocket.c13
-rw-r--r--drivers/tty/serial/68328serial.c5
-rw-r--r--drivers/tty/serial/8250/8250_core.c26
-rw-r--r--drivers/tty/serial/8250/8250_dma.c6
-rw-r--r--drivers/tty/serial/8250/8250_dw.c288
-rw-r--r--drivers/tty/serial/8250/8250_early.c4
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c88
-rw-r--r--drivers/tty/serial/8250/8250_mid.c326
-rw-r--r--drivers/tty/serial/8250/8250_omap.c8
-rw-r--r--drivers/tty/serial/8250/8250_pci.c229
-rw-r--r--drivers/tty/serial/8250/8250_port.c86
-rw-r--r--drivers/tty/serial/8250/Kconfig25
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/Kconfig12
-rw-r--r--drivers/tty/serial/altera_uart.c26
-rw-r--r--drivers/tty/serial/amba-pl011.c4
-rw-r--r--drivers/tty/serial/apbuart.c1
-rw-r--r--drivers/tty/serial/atmel_serial.c27
-rw-r--r--drivers/tty/serial/clps711x.c2
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c1
-rw-r--r--drivers/tty/serial/crisv10.c34
-rw-r--r--drivers/tty/serial/fsl_lpuart.c39
-rw-r--r--drivers/tty/serial/imx.c175
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c7
-rw-r--r--drivers/tty/serial/men_z135_uart.c23
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c7
-rw-r--r--drivers/tty/serial/mpsc.c41
-rw-r--r--drivers/tty/serial/msm_serial.c622
-rw-r--r--drivers/tty/serial/msm_serial.h53
-rw-r--r--drivers/tty/serial/mxs-auart.c2
-rw-r--r--drivers/tty/serial/of_serial.c10
-rw-r--r--drivers/tty/serial/omap-serial.c2
-rw-r--r--drivers/tty/serial/samsung.c66
-rw-r--r--drivers/tty/serial/sc16is7xx.c7
-rw-r--r--drivers/tty/serial/serial-tegra.c94
-rw-r--r--drivers/tty/serial/serial_core.c9
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.c133
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.h40
-rw-r--r--drivers/tty/serial/sh-sci.c1192
-rw-r--r--drivers/tty/serial/sh-sci.h49
-rw-r--r--drivers/tty/serial/sprd_serial.c1
-rw-r--r--drivers/tty/serial/st-asc.c2
-rw-r--r--drivers/tty/serial/stm32-usart.c3
-rw-r--r--drivers/tty/synclink.c20
-rw-r--r--drivers/tty/synclink_gt.c14
-rw-r--r--drivers/tty/synclinkmp.c14
-rw-r--r--drivers/tty/sysrq.c6
-rw-r--r--drivers/tty/tty_buffer.c12
-rw-r--r--drivers/tty/tty_io.c59
-rw-r--r--drivers/tty/tty_ldisc.c2
-rw-r--r--drivers/tty/tty_port.c28
-rw-r--r--drivers/usb/gadget/function/u_serial.c6
-rw-r--r--include/linux/dma/hsu.h11
-rw-r--r--include/linux/n_r3964.h8
-rw-r--r--include/linux/platform_data/atmel.h6
-rw-r--r--include/linux/platform_data/dma-hsu.h4
-rw-r--r--include/linux/tty.h48
-rw-r--r--net/irda/ircomm/ircomm_tty.c31
82 files changed, 2600 insertions, 1807 deletions
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
index c2d3b3a..02cb7fe 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
@@ -1,7 +1,8 @@
* Ingenic SoC UART
Required properties:
-- compatible : "ingenic,jz4740-uart" or "ingenic,jz4780-uart"
+- compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart",
+ "ingenic,jz4775-uart" or "ingenic,jz4780-uart"
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
- clocks : phandles to the module & baud clocks.
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index cbae3d9..77863ae 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -19,7 +19,7 @@ Optional properties:
must correspond to the PCLK clocking the internal logic
of the block. Just listing one clock (the first one) is
deprecated.
-- clocks-names:
+- clock-names:
When present, the first clock listed must be named
"uartclk" and the second clock listed must be named
"apb_pclk"
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
index a2114c2..182777f 100644
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -26,6 +26,12 @@ Required properties:
Optional properties:
- dmas: Should contain dma specifiers for transmit and receive channels
- dma-names: Should contain "tx" for transmit and "rx" for receive channels
+- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
+ used with TX DMA channel. Required when using DMA for transmission
+ with UARTDM v1.3 and bellow.
+- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
+ used with RX DMA channel. Required when using DMA for reception
+ with UARTDM v1.3 and bellow.
Note: Aliases may be defined to ensure the correct ordering of the UARTs.
The alias serialN will result in the UART being assigned port N. If any
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index e84b13a..73f825e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -23,6 +23,8 @@ Required properties:
- "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
- "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
- "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
+ - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
+ - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,scif" for generic SCIF compatible UART.
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
index 289c40e..12bbe9f 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
@@ -15,6 +15,9 @@ The supplying peripheral clock can also be handled, needing a second property
Required elements: "baudclk", "apb_pclk"
Optional properties:
+- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
+ configuration parameter. Define this if your UART does not implement the busy
+ functionality.
- resets : phandle to the parent reset controller.
- reg-shift : quantity to shift the register offsets by. If this property is
not present then the register offsets are not shifted.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c76200a..6263a2d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1024,6 +1024,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
serial port must already be setup and configured.
Options are not yet supported.
+ lpuart,<addr>
+ lpuart32,<addr>
+ Use early console provided by Freescale LP UART driver
+ found on Freescale Vybrid and QorIQ LS1021A processors.
+ A valid base address must be provided, and the serial
+ port must already be setup and configured.
+
earlyprintk= [X86,SH,BLACKFIN,ARM,M68k]
earlyprintk=vga
earlyprintk=efi
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index c415b0e..379468e 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -439,11 +439,13 @@ Modem control lines via GPIO
Some helpers are provided in order to set/get modem control lines via GPIO.
-mctrl_gpio_init(dev, idx):
+mctrl_gpio_init(port, idx):
This will get the {cts,rts,...}-gpios from device tree if they are
present and request them, set direction etc, and return an
allocated structure. devm_* functions are used, so there's no need
to call mctrl_gpio_free().
+ As this sets up the irq handling make sure to not handle changes to the
+ gpio input lines in your driver, too.
mctrl_gpio_free(dev, gpios):
This will free the requested gpios in mctrl_gpio_init().
@@ -458,3 +460,9 @@ mctrl_gpio_set(gpios, mctrl):
mctrl_gpio_get(gpios, mctrl):
This will update mctrl with the gpios values.
+
+mctrl_gpio_enable_ms(gpios):
+ Enables irqs and handling of changes to the ms lines.
+
+mctrl_gpio_disable_ms(gpios):
+ Disables irqs and handling of changes to the ms lines.
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 973c8ad..bc3842d 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -39,8 +39,13 @@ TTY side interfaces:
open() - Called when the line discipline is attached to
the terminal. No other call into the line
discipline for this tty will occur until it
- completes successfully. Returning an error will
- prevent the ldisc from being attached. Can sleep.
+ completes successfully. Should initialize any
+ state needed by the ldisc, and set receive_room
+ in the tty_struct to the maximum amount of data
+ the line discipline is willing to accept from the
+ driver with a single call to receive_buf().
+ Returning an error will prevent the ldisc from
+ being attached. Can sleep.
close() - This is called on a terminal when the line
discipline is being unplugged. At the point of
@@ -52,9 +57,16 @@ hangup() - Called when the tty line is hung up.
No further calls into the ldisc code will occur.
The return value is ignored. Can sleep.
-write() - A process is writing data through the line
- discipline. Multiple write calls are serialized
- by the tty layer for the ldisc. May sleep.
+read() - (optional) A process requests reading data from
+ the line. Multiple read calls may occur in parallel
+ and the ldisc must deal with serialization issues.
+ If not defined, the process will receive an EIO
+ error. May sleep.
+
+write() - (optional) A process requests writing data to the
+ line. Multiple write calls are serialized by the
+ tty layer for the ldisc. If not defined, the
+ process will receive an EIO error. May sleep.
flush_buffer() - (optional) May be called at any point between
open and close, and instructs the line discipline
@@ -69,27 +81,33 @@ set_termios() - (optional) Called on termios structure changes.
termios semaphore so allowed to sleep. Serialized
against itself only.
-read() - Move data from the line discipline to the user.
- Multiple read calls may occur in parallel and the
- ldisc must deal with serialization issues. May
- sleep.
-
-poll() - Check the status for the poll/select calls. Multiple
- poll calls may occur in parallel. May sleep.
+poll() - (optional) Check the status for the poll/select
+ calls. Multiple poll calls may occur in parallel.
+ May sleep.
-ioctl() - Called when an ioctl is handed to the tty layer
- that might be for the ldisc. Multiple ioctl calls
- may occur in parallel. May sleep.
+ioctl() - (optional) Called when an ioctl is handed to the
+ tty layer that might be for the ldisc. Multiple
+ ioctl calls may occur in parallel. May sleep.
-compat_ioctl() - Called when a 32 bit ioctl is handed to the tty layer
- that might be for the ldisc. Multiple ioctl calls
- may occur in parallel. May sleep.
+compat_ioctl() - (optional) Called when a 32 bit ioctl is handed
+ to the tty layer that might be for the ldisc.
+ Multiple ioctl calls may occur in parallel.
+ May sleep.
Driver Side Interfaces:
-receive_buf() - Hand buffers of bytes from the driver to the ldisc
- for processing. Semantics currently rather
- mysterious 8(
+receive_buf() - (optional) Called by the low-level driver to hand
+ a buffer of received bytes to the ldisc for
+ processing. The number of bytes is guaranteed not
+ to exceed the current value of tty->receive_room.
+ All bytes must be processed.
+
+receive_buf2() - (optional) Called by the low-level driver to hand
+ a buffer of received bytes to the ldisc for
+ processing. Returns the number of bytes processed.
+
+ If both receive_buf() and receive_buf2() are
+ defined, receive_buf2() should be preferred.
write_wakeup() - May be called at any point between open and close.
The TTY_DO_WRITE_WAKEUP flag indicates if a call
diff --git a/arch/arm64/include/asm/dcc.h b/arch/arm64/include/asm/dcc.h
new file mode 100644
index 0000000..65e0190
--- /dev/null
+++ b/arch/arm64/include/asm/dcc.h
@@ -0,0 +1,55 @@
+/* Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * A call to __dcc_getchar() or __dcc_putchar() is typically followed by
+ * a call to __dcc_getstatus(). We want to make sure that the CPU does
+ * not speculative read the DCC status before executing the read or write
+ * instruction. That's what the ISBs are for.
+ *
+ * The 'volatile' ensures that the compiler does not cache the status bits,
+ * and instead reads the DCC register every time.
+ */
+#ifndef __ASM_DCC_H
+#define __ASM_DCC_H
+
+#include <asm/barrier.h>
+
+static inline u32 __dcc_getstatus(void)
+{
+ u32 ret;
+
+ asm volatile("mrs %0, mdccsr_el0" : "=r" (ret));
+
+ return ret;
+}
+
+static inline char __dcc_getchar(void)
+{
+ char c;
+
+ asm volatile("mrs %0, dbgdtrrx_el0" : "=r" (c));
+ isb();
+
+ return c;
+}
+
+static inline void __dcc_putchar(char c)
+{
+ /*
+ * The typecast is to make absolutely certain that 'c' is
+ * zero-extended.
+ */
+ asm volatile("msr dbgdtrtx_el0, %0"
+ : : "r" ((unsigned long)(unsigned char)c));
+ isb();
+}
+
+#endif
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 7680d52..45df4bf 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2507,15 +2507,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
__FILE__, __LINE__, tty->driver->name, port->count);
- /* If port is closing, signal caller to try again */
- if (port->flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, port->close_wait,
- !(port->flags & ASYNC_CLOSING));
- retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
diff --git a/drivers/dma/hsu/Kconfig b/drivers/dma/hsu/Kconfig
index 2810dca..c708417 100644
--- a/drivers/dma/hsu/Kconfig
+++ b/drivers/dma/hsu/Kconfig
@@ -5,10 +5,5 @@ config HSU_DMA
select DMA_VIRTUAL_CHANNELS
config HSU_DMA_PCI
- tristate "High Speed UART DMA PCI driver"
- depends on PCI
- select HSU_DMA
- help
- Support the High Speed UART DMA on the platfroms that
- enumerate it as a PCI device. For example, Intel Medfield
- has integrated this HSU DMA controller.
+ tristate
+ depends on HSU_DMA && PCI
diff --git a/drivers/dma/hsu/hsu.c b/drivers/dma/hsu/hsu.c
index 7669c7d..823ad72 100644
--- a/drivers/dma/hsu/hsu.c
+++ b/drivers/dma/hsu/hsu.c
@@ -146,7 +146,7 @@ irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr)
u32 sr;
/* Sanity check */
- if (nr >= chip->pdata->nr_channels)
+ if (nr >= chip->hsu->nr_channels)
return IRQ_NONE;
hsuc = &chip->hsu->chan[nr];
@@ -375,7 +375,6 @@ static void hsu_dma_free_chan_resources(struct dma_chan *chan)
int hsu_dma_probe(struct hsu_dma_chip *chip)
{
struct hsu_dma *hsu;
- struct hsu_dma_platform_data *pdata = chip->pdata;
void __iomem *addr = chip->regs + chip->offset;
unsigned short i;
int ret;
@@ -386,25 +385,16 @@ int hsu_dma_probe(struct hsu_dma_chip *chip)
chip->hsu = hsu;
- if (!pdata) {
- pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ /* Calculate nr_channels from the IO space length */
+ hsu->nr_channels = (chip->length - chip->offset) / HSU_DMA_CHAN_LENGTH;
- chip->pdata = pdata;
-
- /* Guess nr_channels from the IO space length */
- pdata->nr_channels = (chip->length - chip->offset) /
- HSU_DMA_CHAN_LENGTH;
- }
-
- hsu->chan = devm_kcalloc(chip->dev, pdata->nr_channels,
+ hsu->chan = devm_kcalloc(chip->dev, hsu->nr_channels,
sizeof(*hsu->chan), GFP_KERNEL);
if (!hsu->chan)
return -ENOMEM;
INIT_LIST_HEAD(&hsu->dma.channels);
- for (i = 0; i < pdata->nr_channels; i++) {
+ for (i = 0; i < hsu->nr_channels; i++) {
struct hsu_dma_chan *hsuc = &hsu->chan[i];
hsuc->vchan.desc_free = hsu_dma_desc_free;
@@ -440,7 +430,7 @@ int hsu_dma_probe(struct hsu_dma_chip *chip)
if (ret)
return ret;
- dev_info(chip->dev, "Found HSU DMA, %d channels\n", pdata->nr_channels);
+ dev_info(chip->dev, "Found HSU DMA, %d channels\n", hsu->nr_channels);
return 0;
}
EXPORT_SYMBOL_GPL(hsu_dma_probe);
@@ -452,7 +442,7 @@ int hsu_dma_remove(struct hsu_dma_chip *chip)
dma_async_device_unregister(&hsu->dma);
- for (i = 0; i < chip->pdata->nr_channels; i++) {
+ for (i = 0; i < hsu->nr_channels; i++) {
struct hsu_dma_chan *hsuc = &hsu->chan[i];
tasklet_kill(&hsuc->vchan.task);
diff --git a/drivers/dma/hsu/hsu.h b/drivers/dma/hsu/hsu.h
index eeb9fff..f06579c 100644
--- a/drivers/dma/hsu/hsu.h
+++ b/drivers/dma/hsu/hsu.h
@@ -107,6 +107,7 @@ struct hsu_dma {
/* channels */
struct hsu_dma_chan *chan;
+ unsigned short nr_channels;
};
static inline struct hsu_dma *to_hsu_dma(struct dma_device *ddev)
diff --git a/drivers/dma/hsu/pci.c b/drivers/dma/hsu/pci.c
index 77879e6..e2db76b 100644
--- a/drivers/dma/hsu/pci.c
+++ b/drivers/dma/hsu/pci.c
@@ -31,7 +31,7 @@ static irqreturn_t hsu_pci_irq(int irq, void *dev)
irqreturn_t ret = IRQ_NONE;
dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
- for (i = 0; i < chip->pdata->nr_channels; i++) {
+ for (i = 0; i < chip->hsu->nr_channels; i++) {
if (dmaisr & 0x1)
ret |= hsu_dma_irq(chip, i);
dmaisr >>= 1;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index bc91261..2175225 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1582,7 +1582,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
* line status register.
*/
if (port->flags & ASYNC_INITIALIZED) {
- tty_wait_until_sent_from_close(tty, 3000); /* 30 seconds timeout */
+ tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 87f6578..d4a1331 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1577,15 +1577,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
#endif
/*
- * If the port is the middle of closing, bail out now
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
- }
-
- /*
* Start up serial port
*/
retval = cy_startup(info, tty);
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 2509d05..574da15 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -81,7 +81,7 @@ config HVC_UDBG
config HVC_DCC
bool "ARM JTAG DCC console"
- depends on ARM
+ depends on ARM || ARM64
select HVC_DRIVER
help
This console uses the JTAG DCC on ARM to create a console under the HVC
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 4e9c4cc..e46d628 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -29,7 +29,7 @@
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/list.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/major.h>
#include <linux/atomic.h>
#include <linux/sysrq.h>
@@ -418,7 +418,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
* there is no buffered data otherwise sleeps on a wait queue
* waking periodically to check chars_in_buffer().
*/
- tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
+ tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
} else {
if (hp->port.count < 0)
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
@@ -1005,19 +1005,3 @@ put_tty:
out:
return err;
}
-
-/* This isn't particularly necessary due to this being a console driver
- * but it is nice to be thorough.
- */
-static void __exit hvc_exit(void)
-{
- if (hvc_driver) {
- kthread_stop(hvc_task);
-
- tty_unregister_driver(hvc_driver);
- /* return tty_struct instances allocated in hvc_init(). */
- put_tty_driver(hvc_driver);
- unregister_console(&hvc_console);
- }
-}
-module_exit(hvc_exit);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 809920d..82f240f 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -70,20 +70,27 @@ static const struct hv_ops hvc_dcc_get_put_ops = {
static int __init hvc_dcc_console_init(void)
{
+ int ret;
+
if (!hvc_dcc_check())
return -ENODEV;
- hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
- return 0;
+ /* Returns -1 if error */
+ ret = hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
+
+ return ret < 0 ? -ENODEV : 0;
}
console_initcall(hvc_dcc_console_init);
static int __init hvc_dcc_init(void)
{
+ struct hvc_struct *p;
+
if (!hvc_dcc_check())
return -ENODEV;
- hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
- return 0;
+ p = hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
+
+ return PTR_ERR_OR_ZERO(p);
}
device_initcall(hvc_dcc_init);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index f7ff97c..5997b17 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1230,7 +1230,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
irq = hvcsd->vdev->irq;
spin_unlock_irqrestore(&hvcsd->lock, flags);
- tty_wait_until_sent_from_close(tty, HVCS_CLOSE_WAIT);
+ tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
/*
* This line is important because it tells hvcs_open that this
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index a8c8cfd..a119176 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -977,7 +977,7 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev)
/* Try requesting the IRQ */
if (priv->irq >= 0) {
/*
- * IRQF_SHARED, IRQF_NO_SUSPEND: The FDC IRQ may be shared with
+ * IRQF_SHARED, IRQF_COND_SUSPEND: The FDC IRQ may be shared with
* other local interrupts such as the timer which sets
* IRQF_TIMER (including IRQF_NO_SUSPEND).
*
@@ -987,7 +987,7 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev)
*/
ret = devm_request_irq(priv->dev, priv->irq, mips_ejtag_fdc_isr,
IRQF_PERCPU | IRQF_SHARED |
- IRQF_NO_THREAD | IRQF_NO_SUSPEND,
+ IRQF_NO_THREAD | IRQF_COND_SUSPEND,
priv->fdc_name, priv);
if (ret)
priv->irq = -1;
@@ -1048,38 +1048,6 @@ err_destroy_ports:
return ret;
}
-static int mips_ejtag_fdc_tty_remove(struct mips_cdmm_device *dev)
-{
- struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev);
- struct mips_ejtag_fdc_tty_port *dport;
- int nport;
- unsigned int cfg;
-
- if (priv->irq >= 0) {
- raw_spin_lock_irq(&priv->lock);
- cfg = mips_ejtag_fdc_read(priv, REG_FDCFG);
- /* Disable interrupts */
- cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES);
- cfg |= REG_FDCFG_TXINTTHRES_DISABLED;
- cfg |= REG_FDCFG_RXINTTHRES_DISABLED;
- mips_ejtag_fdc_write(priv, REG_FDCFG, cfg);
- raw_spin_unlock_irq(&priv->lock);
- } else {
- priv->removing = true;
- del_timer_sync(&priv->poll_timer);
- }
- kthread_stop(priv->thread);
- if (dev->cpu == 0)
- mips_ejtag_fdc_con.tty_drv = NULL;
- tty_unregister_driver(priv->driver);
- for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) {
- dport = &priv->ports[nport];
- tty_port_destroy(&dport->port);
- }
- put_tty_driver(priv->driver);
- return 0;
-}
-
static int mips_ejtag_fdc_tty_cpu_down(struct mips_cdmm_device *dev)
{
struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev);
@@ -1152,12 +1120,11 @@ static struct mips_cdmm_driver mips_ejtag_fdc_tty_driver = {
.name = "mips_ejtag_fdc",
},
.probe = mips_ejtag_fdc_tty_probe,
- .remove = mips_ejtag_fdc_tty_remove,
.cpu_down = mips_ejtag_fdc_tty_cpu_down,
.cpu_up = mips_ejtag_fdc_tty_cpu_up,
.id_table = mips_ejtag_fdc_tty_ids,
};
-module_mips_cdmm_driver(mips_ejtag_fdc_tty_driver);
+builtin_mips_cdmm_driver(mips_ejtag_fdc_tty_driver);
static int __init mips_ejtag_fdc_init_console(void)
{
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 8b157d6..3451114 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -276,7 +276,7 @@ static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code)
add_msg(pHeader->owner, R3964_MSG_ACK, pHeader->length,
error_code, NULL);
}
- wake_up_interruptible(&pInfo->read_wait);
+ wake_up_interruptible(&pInfo->tty->read_wait);
}
spin_lock_irqsave(&pInfo->lock, flags);
@@ -542,7 +542,7 @@ static void on_receive_block(struct r3964_info *pInfo)
pBlock);
}
}
- wake_up_interruptible(&pInfo->read_wait);
+ wake_up_interruptible(&pInfo->tty->read_wait);
pInfo->state = R3964_IDLE;
@@ -978,8 +978,8 @@ static int r3964_open(struct tty_struct *tty)
}
spin_lock_init(&pInfo->lock);
+ mutex_init(&pInfo->read_lock);
pInfo->tty = tty;
- init_waitqueue_head(&pInfo->read_wait);
pInfo->priority = R3964_MASTER;
pInfo->rx_first = pInfo->rx_last = NULL;
pInfo->tx_first = pInfo->tx_last = NULL;
@@ -1045,7 +1045,6 @@ static void r3964_close(struct tty_struct *tty)
}
/* Free buffers: */
- wake_up_interruptible(&pInfo->read_wait);
kfree(pInfo->rx_buf);
TRACE_M("r3964_close - rx_buf kfree %p", pInfo->rx_buf);
kfree(pInfo->tx_buf);
@@ -1065,7 +1064,16 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
TRACE_L("read()");
- tty_lock(tty);
+ /*
+ * Internal serialization of reads.
+ */
+ if (file->f_flags & O_NONBLOCK) {
+ if (!mutex_trylock(&pInfo->read_lock))
+ return -EAGAIN;
+ } else {
+ if (mutex_lock_interruptible(&pInfo->read_lock))
+ return -ERESTARTSYS;
+ }
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1077,7 +1085,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible_tty(tty, pInfo->read_wait,
+ wait_event_interruptible(tty->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
@@ -1107,7 +1115,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
}
ret = -EPERM;
unlock:
- tty_unlock(tty);
+ mutex_unlock(&pInfo->read_lock);
return ret;
}
@@ -1156,8 +1164,6 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
pHeader->locks = 0;
pHeader->owner = NULL;
- tty_lock(tty);
-
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
pHeader->owner = pClient;
@@ -1175,8 +1181,6 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- tty_unlock(tty);
-
return 0;
}
@@ -1227,7 +1231,7 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file,
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
- poll_wait(file, &pInfo->read_wait, wait);
+ poll_wait(file, &tty->read_wait, wait);
spin_lock_irqsave(&pInfo->lock, flags);
pMsg = pClient->first_msg;
spin_unlock_irqrestore(&pInfo->lock, flags);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b09023b..1384426 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -201,7 +201,7 @@ static void n_tty_kick_worker(struct tty_struct *tty)
*/
WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
"scheduling buffer work for halted ldisc\n");
- queue_work(system_unbound_wq, &tty->port->buf.work);
+ tty_buffer_restart_work(tty->port);
}
}
@@ -1179,8 +1179,6 @@ static void n_tty_receive_break(struct tty_struct *tty)
put_tty_queue('\0', ldata);
}
put_tty_queue('\0', ldata);
- if (waitqueue_active(&tty->read_wait))
- wake_up_interruptible_poll(&tty->read_wait, POLLIN);
}
/**
@@ -1237,8 +1235,6 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
put_tty_queue('\0', ldata);
} else
put_tty_queue(c, ldata);
- if (waitqueue_active(&tty->read_wait))
- wake_up_interruptible_poll(&tty->read_wait, POLLIN);
}
static void
@@ -2142,37 +2138,15 @@ extern ssize_t redirected_tty_write(struct file *, const char __user *,
static int job_control(struct tty_struct *tty, struct file *file)
{
- struct pid *pgrp;
-
/* Job control check -- must be done at start and after
every sleep (POSIX.1 7.1.1.4). */
/* NOTE: not yet done after every sleep pending a thorough
check of the logic of this change. -- jlc */
/* don't stop on /dev/console */
- if (file->f_op->write == redirected_tty_write ||
- current->signal->tty != tty)
+ if (file->f_op->write == redirected_tty_write)
return 0;
- rcu_read_lock();
- pgrp = task_pgrp(current);
-
- spin_lock_irq(&tty->ctrl_lock);
- if (!tty->pgrp)
- printk(KERN_ERR "n_tty_read: no tty->pgrp!\n");
- else if (pgrp != tty->pgrp) {
- spin_unlock_irq(&tty->ctrl_lock);
- if (is_ignored(SIGTTIN) || is_current_pgrp_orphaned()) {
- rcu_read_unlock();
- return -EIO;
- }
- kill_pgrp(pgrp, SIGTTIN, 1);
- rcu_read_unlock();
- set_thread_flag(TIF_SIGPENDING);
- return -ERESTARTSYS;
- }
- spin_unlock_irq(&tty->ctrl_lock);
- rcu_read_unlock();
- return 0;
+ return __tty_check_change(tty, SIGTTIN);
}
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 4d5937c..a45660f 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
@@ -501,6 +500,10 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
}
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
+/*
+ * not really modular, but the easiest way to keep compat with existing
+ * bootargs behaviour is to continue using module_param here.
+ */
module_param(legacy_count, int, 0);
/*
@@ -877,4 +880,4 @@ static int __init pty_init(void)
unix98_pty_init();
return 0;
}
-module_init(pty_init);
+device_initcall(pty_init);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index c8dd8dc..802eac7 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -895,14 +895,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
if (!page)
return -ENOMEM;
- if (port->flags & ASYNC_CLOSING) {
- retval = wait_for_completion_interruptible(&info->close_wait);
- free_page(page);
- if (retval)
- return retval;
- return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
- }
-
/*
* We must not sleep from here until the port is marked fully in use.
*/
@@ -1057,7 +1049,6 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&port->mutex);
tty_port_tty_set(port, NULL);
- wake_up_interruptible(&port->close_wait);
complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
@@ -1511,10 +1502,6 @@ static void rp_hangup(struct tty_struct *tty)
#endif
rp_flush_buffer(tty);
spin_lock_irqsave(&info->port.lock, flags);
- if (info->port.flags & ASYNC_CLOSING) {
- spin_unlock_irqrestore(&info->port.lock, flags);
- return;
- }
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 748c18f..0140ba4 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -560,8 +560,8 @@ static void rs_fair_output(void)
struct m68k_serial *info = &m68k_soft[0];
char c;
- if (info == 0) return;
- if (info->xmit_buf == 0) return;
+ if (info == NULL) return;
+ if (info->xmit_buf == NULL) return;
local_irq_save(flags);
left = info->xmit_cnt;
@@ -1071,7 +1071,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
wake_up_interruptible(&port->open_wait);
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
local_irq_restore(flags);
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 271d121..3912646 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -569,6 +569,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
+ if (up->port.type == PORT_8250_CIR)
+ continue;
+
if (up->port.dev)
continue;
@@ -1027,13 +1030,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
+ if (uart->port.type != PORT_8250_CIR) {
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg,
+ &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ } else {
+ dev_info(uart->port.dev,
+ "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+ uart->port.iobase,
+ (unsigned long long)uart->port.mapbase,
+ uart->port.irq);
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
+ ret = 0;
+ }
}
mutex_unlock(&serial_mutex);
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index e508939..78259d3 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -54,9 +54,6 @@ static void __dma_rx_complete(void *param)
struct dma_tx_state state;
int count;
- dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
-
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
@@ -152,9 +149,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
dma->rx_cookie = dmaengine_submit(desc);
- dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
-
dma_async_issue_pending(dma->rxchan);
return 0;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 06324f1..a0cdbf3 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -63,6 +63,9 @@ struct dw8250_data {
struct clk *pclk;
struct reset_control *rst;
struct uart_8250_dma dma;
+
+ unsigned int skip_autocfg:1;
+ unsigned int uart_16550_compatible:1;
};
#define BYT_PRV_CLK 0x800
@@ -244,24 +247,77 @@ out:
serial8250_do_set_termios(p, termios, old);
}
-static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+/*
+ * dw8250_fallback_dma_filter will prevent the UART from getting just any free
+ * channel on platforms that have DMA engines, but don't have any channels
+ * assigned to the UART.
+ *
+ * REVISIT: This is a work around for limitation in the DMA Engine API. Once the
+ * core problem is fixed, this function is no longer needed.
+ */
+static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
{
return false;
}
-static void dw8250_setup_port(struct uart_8250_port *up)
+static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
+{
+ return param == chan->device->dev->parent;
+}
+
+static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
- struct uart_port *p = &up->port;
- u32 reg = readl(p->membase + DW_UART_UCV);
+ if (p->dev->of_node) {
+ struct device_node *np = p->dev->of_node;
+ int id;
+
+ /* get index of serial line, if found in DT aliases */
+ id = of_alias_get_id(np, "serial");
+ if (id >= 0)
+ p->line = id;
+#ifdef CONFIG_64BIT
+ if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
+ p->serial_in = dw8250_serial_inq;
+ p->serial_out = dw8250_serial_outq;
+ p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ p->type = PORT_OCTEON;
+ data->usr_reg = 0x27;
+ data->skip_autocfg = true;
+ }
+#endif
+ } else if (has_acpi_companion(p->dev)) {
+ p->iotype = UPIO_MEM32;
+ p->regshift = 2;
+ p->serial_in = dw8250_serial_in32;
+ p->set_termios = dw8250_set_termios;
+ /* So far none of there implement the Busy Functionality */
+ data->uart_16550_compatible = true;
+ }
+
+ /* Platforms with iDMA */
+ if (platform_get_resource_byname(to_platform_device(p->dev),
+ IORESOURCE_MEM, "lpss_priv")) {
+ p->set_termios = dw8250_set_termios;
+ data->dma.rx_param = p->dev->parent;
+ data->dma.tx_param = p->dev->parent;
+ data->dma.fn = dw8250_idma_filter;
+ }
+}
+
+static void dw8250_setup_port(struct uart_port *p)
+{
+ struct uart_8250_port *up = up_to_u8250p(p);
+ u32 reg;
/*
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
+ reg = readl(p->membase + DW_UART_UCV);
if (!reg)
return;
- dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n",
+ dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
reg = readl(p->membase + DW_UART_CPR);
@@ -273,7 +329,6 @@ static void dw8250_setup_port(struct uart_8250_port *up)
p->type = PORT_16550A;
p->flags |= UPF_FIXED_TYPE;
p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
- up->tx_loadsz = p->fifosize;
up->capabilities = UART_CAP_FIFO;
}
@@ -281,166 +336,91 @@ static void dw8250_setup_port(struct uart_8250_port *up)
up->capabilities |= UART_CAP_AFE;
}
-static int dw8250_probe_of(struct uart_port *p,
- struct dw8250_data *data)
+static int dw8250_probe(struct platform_device *pdev)
{
- struct device_node *np = p->dev->of_node;
- struct uart_8250_port *up = up_to_u8250p(p);
- u32 val;
- bool has_ucv = true;
- int id;
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+ struct uart_port *p = &uart.port;
+ struct dw8250_data *data;
+ int err;
+ u32 val;
-#ifdef CONFIG_64BIT
- if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
- p->serial_in = dw8250_serial_inq;
- p->serial_out = dw8250_serial_outq;
- p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- p->type = PORT_OCTEON;
- data->usr_reg = 0x27;
- has_ucv = false;
- } else
-#endif
- if (!of_property_read_u32(np, "reg-io-width", &val)) {
- switch (val) {
- case 1:
- break;
- case 4:
- p->iotype = UPIO_MEM32;
- p->serial_in = dw8250_serial_in32;
- p->serial_out = dw8250_serial_out32;
- break;
- default:
- dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
- return -EINVAL;
- }
+ if (!regs) {
+ dev_err(&pdev->dev, "no registers defined\n");
+ return -EINVAL;
}
- if (has_ucv)
- dw8250_setup_port(up);
- /* if we have a valid fifosize, try hooking up DMA here */
- if (p->fifosize) {
- up->dma = &data->dma;
-
- up->dma->rxconf.src_maxburst = p->fifosize / 4;
- up->dma->txconf.dst_maxburst = p->fifosize / 4;
+ if (irq < 0) {
+ if (irq != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "cannot get irq\n");
+ return irq;
}
- if (!of_property_read_u32(np, "reg-shift", &val))
+ spin_lock_init(&p->lock);
+ p->mapbase = regs->start;
+ p->irq = irq;
+ p->handle_irq = dw8250_handle_irq;
+ p->pm = dw8250_do_pm;
+ p->type = PORT_8250;
+ p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ p->dev = &pdev->dev;
+ p->iotype = UPIO_MEM;
+ p->serial_in = dw8250_serial_in;
+ p->serial_out = dw8250_serial_out;
+
+ p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+ if (!p->membase)
+ return -ENOMEM;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dma.fn = dw8250_fallback_dma_filter;
+ data->usr_reg = DW_UART_USR;
+ p->private_data = data;
+
+ data->uart_16550_compatible = device_property_read_bool(p->dev,
+ "snps,uart-16550-compatible");
+
+ err = device_property_read_u32(p->dev, "reg-shift", &val);
+ if (!err)
p->regshift = val;
- /* get index of serial line, if found in DT aliases */
- id = of_alias_get_id(np, "serial");
- if (id >= 0)
- p->line = id;
+ err = device_property_read_u32(p->dev, "reg-io-width", &val);
+ if (!err && val == 4) {
+ p->iotype = UPIO_MEM32;
+ p->serial_in = dw8250_serial_in32;
+ p->serial_out = dw8250_serial_out32;
+ }
- if (of_property_read_bool(np, "dcd-override")) {
+ if (device_property_read_bool(p->dev, "dcd-override")) {
/* Always report DCD as active */
data->msr_mask_on |= UART_MSR_DCD;
data->msr_mask_off |= UART_MSR_DDCD;
}
- if (of_property_read_bool(np, "dsr-override")) {
+ if (device_property_read_bool(p->dev, "dsr-override")) {
/* Always report DSR as active */
data->msr_mask_on |= UART_MSR_DSR;
data->msr_mask_off |= UART_MSR_DDSR;
}
- if (of_property_read_bool(np, "cts-override")) {
+ if (device_property_read_bool(p->dev, "cts-override")) {
/* Always report CTS as active */
data->msr_mask_on |= UART_MSR_CTS;
data->msr_mask_off |= UART_MSR_DCTS;
}
- if (of_property_read_bool(np, "ri-override")) {
+ if (device_property_read_bool(p->dev, "ri-override")) {
/* Always report Ring indicator as inactive */
data->msr_mask_off |= UART_MSR_RI;
data->msr_mask_off |= UART_MSR_TERI;
}
- return 0;
-}
-
-static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
-{
- struct device *dev = param;
-
- if (dev != chan->device->dev->parent)
- return false;
-
- return true;
-}
-
-static int dw8250_probe_acpi(struct uart_8250_port *up,
- struct dw8250_data *data)
-{
- struct uart_port *p = &up->port;
-
- dw8250_setup_port(up);
-
- p->iotype = UPIO_MEM32;
- p->serial_in = dw8250_serial_in32;
- p->serial_out = dw8250_serial_out32;
- p->regshift = 2;
-
- /* Platforms with iDMA */
- if (platform_get_resource_byname(to_platform_device(up->port.dev),
- IORESOURCE_MEM, "lpss_priv")) {
- data->dma.rx_param = up->port.dev->parent;
- data->dma.tx_param = up->port.dev->parent;
- data->dma.fn = dw8250_idma_filter;
- }
-
- up->dma = &data->dma;
- up->dma->rxconf.src_maxburst = p->fifosize / 4;
- up->dma->txconf.dst_maxburst = p->fifosize / 4;
-
- up->port.set_termios = dw8250_set_termios;
-
- return 0;
-}
-
-static int dw8250_probe(struct platform_device *pdev)
-{
- struct uart_8250_port uart = {};
- struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int irq = platform_get_irq(pdev, 0);
- struct dw8250_data *data;
- int err;
-
- if (!regs) {
- dev_err(&pdev->dev, "no registers defined\n");
- return -EINVAL;
- }
-
- if (irq < 0) {
- if (irq != -EPROBE_DEFER)
- dev_err(&pdev->dev, "cannot get irq\n");
- return irq;
- }
-
- spin_lock_init(&uart.port.lock);
- uart.port.mapbase = regs->start;
- uart.port.irq = irq;
- uart.port.handle_irq = dw8250_handle_irq;
- uart.port.pm = dw8250_do_pm;
- uart.port.type = PORT_8250;
- uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
- uart.port.dev = &pdev->dev;
-
- uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
- resource_size(regs));
- if (!uart.port.membase)
- return -ENOMEM;
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->usr_reg = DW_UART_USR;
-
/* Always ask for fixed clock rate from a property. */
- device_property_read_u32(&pdev->dev, "clock-frequency",
- &uart.port.uartclk);
+ device_property_read_u32(p->dev, "clock-frequency", &p->uartclk);
/* If there is separate baudclk, get the rate from it. */
data->clk = devm_clk_get(&pdev->dev, "baudclk");
@@ -454,11 +434,11 @@ static int dw8250_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n",
err);
else
- uart.port.uartclk = clk_get_rate(data->clk);
+ p->uartclk = clk_get_rate(data->clk);
}
/* If no clock rate is defined, fail. */
- if (!uart.port.uartclk) {
+ if (!p->uartclk) {
dev_err(&pdev->dev, "clock rate not defined\n");
return -EINVAL;
}
@@ -484,26 +464,22 @@ static int dw8250_probe(struct platform_device *pdev)
if (!IS_ERR(data->rst))
reset_control_deassert(data->rst);
- data->dma.rx_param = data;
- data->dma.tx_param = data;
- data->dma.fn = dw8250_dma_filter;
+ dw8250_quirks(p, data);
- uart.port.iotype = UPIO_MEM;
- uart.port.serial_in = dw8250_serial_in;
- uart.port.serial_out = dw8250_serial_out;
- uart.port.private_data = data;
+ /* If the Busy Functionality is not implemented, don't handle it */
+ if (data->uart_16550_compatible) {
+ p->serial_out = NULL;
+ p->handle_irq = NULL;
+ }
- if (pdev->dev.of_node) {
- err = dw8250_probe_of(&uart.port, data);
- if (err)
- goto err_reset;
- } else if (ACPI_HANDLE(&pdev->dev)) {
- err = dw8250_probe_acpi(&uart, data);
- if (err)
- goto err_reset;
- } else {
- err = -ENODEV;
- goto err_reset;
+ if (!data->skip_autocfg)
+ dw8250_setup_port(p);
+
+ /* If we have a valid fifosize, try hooking up DMA */
+ if (p->fifosize) {
+ data->dma.rxconf.src_maxburst = p->fifosize / 4;
+ data->dma.txconf.dst_maxburst = p->fifosize / 4;
+ uart.dma = &data->dma;
}
data->line = serial8250_register_8250_port(&uart);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index faed05f..ceb8579 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -29,6 +29,8 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
@@ -152,3 +154,5 @@ int __init early_serial8250_setup(struct earlycon_device *device,
}
EARLYCON_DECLARE(uart8250, early_serial8250_setup);
EARLYCON_DECLARE(uart, early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 7c1e4be..49394b4 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -21,19 +21,33 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
+#include "8250.h"
+
+/** ingenic_uart_config: SOC specific config data. */
+struct ingenic_uart_config {
+ int tx_loadsz;
+ int fifosize;
+};
+
struct ingenic_uart_data {
struct clk *clk_module;
struct clk *clk_baud;
int line;
};
+static const struct of_device_id of_match[];
+
#define UART_FCR_UME BIT(4)
+#define UART_MCR_MDCE BIT(7)
+#define UART_MCR_FCM BIT(6)
+
static struct earlycon_device *early_device;
static uint8_t __init early_in(struct uart_port *port, int offset)
@@ -129,6 +143,8 @@ OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
{
+ int ier;
+
switch (offset) {
case UART_FCR:
/* UART module enable */
@@ -136,9 +152,22 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
break;
case UART_IER:
+ /* Enable receive timeout interrupt with the
+ * receive line status interrupt */
value |= (value & 0x4) << 2;
break;
+ case UART_MCR:
+ /* If we have enabled modem status IRQs we should enable modem
+ * mode. */
+ ier = p->serial_in(p, UART_IER);
+
+ if (ier & UART_IER_MSI)
+ value |= UART_MCR_MDCE | UART_MCR_FCM;
+ else
+ value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+ break;
+
default:
break;
}
@@ -146,14 +175,45 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
writeb(value, p->membase + (offset << p->regshift));
}
+static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int value;
+
+ value = readb(p->membase + (offset << p->regshift));
+
+ /* Hide non-16550 compliant bits from higher levels */
+ switch (offset) {
+ case UART_FCR:
+ value &= ~UART_FCR_UME;
+ break;
+
+ case UART_MCR:
+ value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+ break;
+
+ default:
+ break;
+ }
+ return value;
+}
+
static int ingenic_uart_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct ingenic_uart_data *data;
+ const struct ingenic_uart_config *cdata;
+ const struct of_device_id *match;
int err, line;
+ match = of_match_device(of_match, &pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ cdata = match->data;
+
if (!regs || !irq) {
dev_err(&pdev->dev, "no registers/irq defined\n");
return -EINVAL;
@@ -164,14 +224,18 @@ static int ingenic_uart_probe(struct platform_device *pdev)
return -ENOMEM;
spin_lock_init(&uart.port.lock);
- uart.port.type = PORT_16550;
+ uart.port.type = PORT_16550A;
uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
uart.port.iotype = UPIO_MEM;
uart.port.mapbase = regs->start;
uart.port.regshift = 2;
uart.port.serial_out = ingenic_uart_serial_out;
+ uart.port.serial_in = ingenic_uart_serial_in;
uart.port.irq = irq->start;
uart.port.dev = &pdev->dev;
+ uart.port.fifosize = cdata->fifosize;
+ uart.tx_loadsz = cdata->tx_loadsz;
+ uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
/* Check for a fixed line number */
line = of_alias_get_id(pdev->dev.of_node, "serial");
@@ -241,10 +305,26 @@ static int ingenic_uart_remove(struct platform_device *pdev)
return 0;
}
+static const struct ingenic_uart_config jz4740_uart_config = {
+ .tx_loadsz = 8,
+ .fifosize = 16,
+};
+
+static const struct ingenic_uart_config jz4760_uart_config = {
+ .tx_loadsz = 16,
+ .fifosize = 32,
+};
+
+static const struct ingenic_uart_config jz4780_uart_config = {
+ .tx_loadsz = 32,
+ .fifosize = 64,
+};
+
static const struct of_device_id of_match[] = {
- { .compatible = "ingenic,jz4740-uart" },
- { .compatible = "ingenic,jz4775-uart" },
- { .compatible = "ingenic,jz4780-uart" },
+ { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
+ { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+ { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
+ { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_match);
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
new file mode 100644
index 0000000..88531a3
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -0,0 +1,326 @@
+/*
+ * 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/rational.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <linux/dma/hsu.h>
+
+#include "8250.h"
+
+#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b
+#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
+#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
+#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
+#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
+
+/* Intel MID Specific registers */
+#define INTEL_MID_UART_PS 0x30
+#define INTEL_MID_UART_MUL 0x34
+#define INTEL_MID_UART_DIV 0x38
+
+struct mid8250;
+
+struct mid8250_board {
+ unsigned long freq;
+ unsigned int base_baud;
+ int (*setup)(struct mid8250 *, struct uart_port *p);
+ void (*exit)(struct mid8250 *);
+};
+
+struct mid8250 {
+ int line;
+ int dma_index;
+ struct pci_dev *dma_dev;
+ struct uart_8250_dma dma;
+ struct mid8250_board *board;
+ struct hsu_dma_chip dma_chip;
+};
+
+/*****************************************************************************/
+
+static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_PNW_UART1:
+ mid->dma_index = 0;
+ break;
+ case PCI_DEVICE_ID_INTEL_PNW_UART2:
+ mid->dma_index = 1;
+ break;
+ case PCI_DEVICE_ID_INTEL_PNW_UART3:
+ mid->dma_index = 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mid->dma_dev = pci_get_slot(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
+ return 0;
+}
+
+static int tng_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+ int index = PCI_FUNC(pdev->devfn);
+
+ /* Currently no support for HSU port0 */
+ if (index-- == 0)
+ return -ENODEV;
+
+ mid->dma_index = index;
+ mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
+ return 0;
+}
+
+static int dnv_handle_irq(struct uart_port *p)
+{
+ struct mid8250 *mid = p->private_data;
+ int ret;
+
+ ret = hsu_dma_irq(&mid->dma_chip, 0);
+ ret |= hsu_dma_irq(&mid->dma_chip, 1);
+
+ /* For now, letting the HW generate separate interrupt for the UART */
+ if (ret)
+ return ret;
+
+ return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+}
+
+#define DNV_DMA_CHAN_OFFSET 0x80
+
+static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct hsu_dma_chip *chip = &mid->dma_chip;
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+ int ret;
+
+ chip->dev = &pdev->dev;
+ chip->irq = pdev->irq;
+ chip->regs = p->membase;
+ chip->length = pci_resource_len(pdev, 0);
+ chip->offset = DNV_DMA_CHAN_OFFSET;
+
+ /* Falling back to PIO mode if DMA probing fails */
+ ret = hsu_dma_probe(chip);
+ if (ret)
+ return 0;
+
+ mid->dma_dev = pdev;
+
+ p->handle_irq = dnv_handle_irq;
+ return 0;
+}
+
+static void dnv_exit(struct mid8250 *mid)
+{
+ if (!mid->dma_dev)
+ return;
+ hsu_dma_remove(&mid->dma_chip);
+}
+
+/*****************************************************************************/
+
+static void mid8250_set_termios(struct uart_port *p,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = tty_termios_baud_rate(termios);
+ struct mid8250 *mid = p->private_data;
+ unsigned short ps = 16;
+ unsigned long fuart = baud * ps;
+ unsigned long w = BIT(24) - 1;
+ unsigned long mul, div;
+
+ if (mid->board->freq < fuart) {
+ /* Find prescaler value that satisfies Fuart < Fref */
+ if (mid->board->freq > baud)
+ ps = mid->board->freq / baud; /* baud rate too high */
+ else
+ ps = 1; /* PLL case */
+ fuart = baud * ps;
+ } else {
+ /* Get Fuart closer to Fref */
+ fuart *= rounddown_pow_of_two(mid->board->freq / fuart);
+ }
+
+ rational_best_approximation(fuart, mid->board->freq, w, w, &mul, &div);
+ p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */
+
+ writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */
+ writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */
+ writel(div, p->membase + INTEL_MID_UART_DIV);
+
+ serial8250_do_set_termios(p, termios, old);
+}
+
+static bool mid8250_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct hsu_dma_slave *s = param;
+
+ if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
+ return false;
+
+ chan->private = s;
+ return true;
+}
+
+static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port)
+{
+ struct uart_8250_dma *dma = &mid->dma;
+ struct device *dev = port->port.dev;
+ struct hsu_dma_slave *rx_param;
+ struct hsu_dma_slave *tx_param;
+
+ if (!mid->dma_dev)
+ return 0;
+
+ rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+ if (!rx_param)
+ return -ENOMEM;
+
+ tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+ if (!tx_param)
+ return -ENOMEM;
+
+ rx_param->chan_id = mid->dma_index * 2 + 1;
+ tx_param->chan_id = mid->dma_index * 2;
+
+ dma->rxconf.src_maxburst = 64;
+ dma->txconf.dst_maxburst = 64;
+
+ rx_param->dma_dev = &mid->dma_dev->dev;
+ tx_param->dma_dev = &mid->dma_dev->dev;
+
+ dma->fn = mid8250_dma_filter;
+ dma->rx_param = rx_param;
+ dma->tx_param = tx_param;
+
+ port->dma = dma;
+ return 0;
+}
+
+static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct uart_8250_port uart;
+ struct mid8250 *mid;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ mid = devm_kzalloc(&pdev->dev, sizeof(*mid), GFP_KERNEL);
+ if (!mid)
+ return -ENOMEM;
+
+ mid->board = (struct mid8250_board *)id->driver_data;
+
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+
+ uart.port.dev = &pdev->dev;
+ uart.port.irq = pdev->irq;
+ uart.port.private_data = mid;
+ uart.port.type = PORT_16750;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.uartclk = mid->board->base_baud * 16;
+ uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ uart.port.set_termios = mid8250_set_termios;
+
+ uart.port.mapbase = pci_resource_start(pdev, 0);
+ uart.port.membase = pcim_iomap(pdev, 0, 0);
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ if (mid->board->setup) {
+ ret = mid->board->setup(mid, &uart.port);
+ if (ret)
+ return ret;
+ }
+
+ ret = mid8250_dma_setup(mid, &uart);
+ if (ret)
+ goto err;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0)
+ goto err;
+
+ mid->line = ret;
+
+ pci_set_drvdata(pdev, mid);
+ return 0;
+err:
+ if (mid->board->exit)
+ mid->board->exit(mid);
+ return ret;
+}
+
+static void mid8250_remove(struct pci_dev *pdev)
+{
+ struct mid8250 *mid = pci_get_drvdata(pdev);
+
+ if (mid->board->exit)
+ mid->board->exit(mid);
+
+ serial8250_unregister_port(mid->line);
+}
+
+static const struct mid8250_board pnw_board = {
+ .freq = 50000000,
+ .base_baud = 115200,
+ .setup = pnw_setup,
+};
+
+static const struct mid8250_board tng_board = {
+ .freq = 38400000,
+ .base_baud = 1843200,
+ .setup = tng_setup,
+};
+
+static const struct mid8250_board dnv_board = {
+ .freq = 133333333,
+ .base_baud = 115200,
+ .setup = dnv_setup,
+ .exit = dnv_exit,
+};
+
+#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }
+
+static const struct pci_device_id pci_ids[] = {
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
+ { },
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver mid8250_pci_driver = {
+ .name = "8250_mid",
+ .id_table = pci_ids,
+ .probe = mid8250_probe,
+ .remove = mid8250_remove,
+};
+
+module_pci_driver(mid8250_pci_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel MID UART driver");
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 826c5c4..a2c0734 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -439,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->xoff = termios->c_cc[VSTOP];
priv->efr = 0;
- up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
@@ -726,6 +725,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
struct dma_tx_state state;
int count;
unsigned long flags;
+ int ret;
dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
@@ -741,8 +741,10 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
count = dma->rx_size - state.residue;
- tty_insert_flip_string(tty_port, dma->rx_buf, count);
- p->port.icount.rx += count;
+ ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
+
+ p->port.icount.rx += ret;
+ p->port.icount.buf_overrun += count - ret;
unlock:
spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 68042dd..4097f3f6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -28,7 +28,6 @@
#include <linux/dmaengine.h>
#include <linux/platform_data/dma-dw.h>
-#include <linux/platform_data/dma-hsu.h>
#include "8250.h"
@@ -1508,167 +1507,6 @@ byt_serial_setup(struct serial_private *priv,
return ret;
}
-#define INTEL_MID_UART_PS 0x30
-#define INTEL_MID_UART_MUL 0x34
-#define INTEL_MID_UART_DIV 0x38
-
-static void intel_mid_set_termios(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old,
- unsigned long fref)
-{
- unsigned int baud = tty_termios_baud_rate(termios);
- unsigned short ps = 16;
- unsigned long fuart = baud * ps;
- unsigned long w = BIT(24) - 1;
- unsigned long mul, div;
-
- if (fref < fuart) {
- /* Find prescaler value that satisfies Fuart < Fref */
- if (fref > baud)
- ps = fref / baud; /* baud rate too high */
- else
- ps = 1; /* PLL case */
- fuart = baud * ps;
- } else {
- /* Get Fuart closer to Fref */
- fuart *= rounddown_pow_of_two(fref / fuart);
- }
-
- rational_best_approximation(fuart, fref, w, w, &mul, &div);
- p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */
-
- writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */
- writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */
- writel(div, p->membase + INTEL_MID_UART_DIV);
-
- serial8250_do_set_termios(p, termios, old);
-}
-
-static void intel_mid_set_termios_38_4M(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old)
-{
- intel_mid_set_termios(p, termios, old, 38400000);
-}
-
-static void intel_mid_set_termios_50M(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old)
-{
- /*
- * The uart clk is 50Mhz, and the baud rate come from:
- * baud = 50M * MUL / (DIV * PS * DLAB)
- */
- intel_mid_set_termios(p, termios, old, 50000000);
-}
-
-static bool intel_mid_dma_filter(struct dma_chan *chan, void *param)
-{
- struct hsu_dma_slave *s = param;
-
- if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
- return false;
-
- chan->private = s;
- return true;
-}
-
-static int intel_mid_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx,
- int index, struct pci_dev *dma_dev)
-{
- struct device *dev = port->port.dev;
- struct uart_8250_dma *dma;
- struct hsu_dma_slave *tx_param, *rx_param;
-
- dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
- if (!dma)
- return -ENOMEM;
-
- tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
- if (!tx_param)
- return -ENOMEM;
-
- rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
- if (!rx_param)
- return -ENOMEM;
-
- rx_param->chan_id = index * 2 + 1;
- tx_param->chan_id = index * 2;
-
- dma->rxconf.src_maxburst = 64;
- dma->txconf.dst_maxburst = 64;
-
- rx_param->dma_dev = &dma_dev->dev;
- tx_param->dma_dev = &dma_dev->dev;
-
- dma->fn = intel_mid_dma_filter;
- dma->rx_param = rx_param;
- dma->tx_param = tx_param;
-
- port->port.type = PORT_16750;
- port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port->dma = dma;
-
- return pci_default_setup(priv, board, port, idx);
-}
-
-#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b
-#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
-#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
-
-static int pnw_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- struct pci_dev *pdev = priv->dev;
- struct pci_dev *dma_dev;
- int index;
-
- switch (pdev->device) {
- case PCI_DEVICE_ID_INTEL_PNW_UART1:
- index = 0;
- break;
- case PCI_DEVICE_ID_INTEL_PNW_UART2:
- index = 1;
- break;
- case PCI_DEVICE_ID_INTEL_PNW_UART3:
- index = 2;
- break;
- default:
- return -EINVAL;
- }
-
- dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
-
- port->port.set_termios = intel_mid_set_termios_50M;
-
- return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
-#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
-
-static int tng_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- struct pci_dev *pdev = priv->dev;
- struct pci_dev *dma_dev;
- int index = PCI_FUNC(pdev->devfn);
-
- /* Currently no support for HSU port0 */
- if (index-- == 0)
- return -ENODEV;
-
- dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
-
- port->port.set_termios = intel_mid_set_termios_38_4M;
-
- return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2212,34 +2050,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART1,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART3,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_TNG_UART,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = tng_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_BSW_UART1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -3119,8 +2929,6 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_byt,
- pbn_pnw,
- pbn_tng,
pbn_qrk,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
@@ -3907,16 +3715,6 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 0x80,
.reg_shift = 2,
},
- [pbn_pnw] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 115200,
- },
- [pbn_tng] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 1843200,
- },
[pbn_qrk] = {
.flags = FL_BASE0,
.num_ports = 1,
@@ -4005,6 +3803,13 @@ static const struct pci_device_id blacklist[] = {
{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
+
+ /* Intel platforms with MID UART */
+ { PCI_VDEVICE(INTEL, 0x081b), },
+ { PCI_VDEVICE(INTEL, 0x081c), },
+ { PCI_VDEVICE(INTEL, 0x081d), },
+ { PCI_VDEVICE(INTEL, 0x1191), },
+ { PCI_VDEVICE(INTEL, 0x19d8), },
};
/*
@@ -5702,26 +5507,6 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_byt },
/*
- * Intel Penwell
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
-
- /*
- * Intel Tangier
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_tng},
-
- /*
* Intel Quark x1000
*/
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 0bbf340..52d82d2 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -284,7 +284,7 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
serial_out(up, UART_DLM, value >> 8 & 0xff);
}
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+#ifdef CONFIG_SERIAL_8250_RT288X
/* Au1x00/RT288x UART hardware has a weird register layout */
static const s8 au_io_in_map[8] = {
@@ -435,7 +435,7 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32be_serial_out;
break;
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+#ifdef CONFIG_SERIAL_8250_RT288X
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
@@ -1246,6 +1246,9 @@ static void autoconfig_irq(struct uart_8250_port *up)
inb_p(ICP);
}
+ if (uart_console(port))
+ console_lock();
+
/* forget possible initially masked and pending IRQ */
probe_irq_off(probe_irq_on());
save_mcr = serial_in(up, UART_MCR);
@@ -1277,6 +1280,9 @@ static void autoconfig_irq(struct uart_8250_port *up)
if (port->flags & UPF_FOURPORT)
outb_p(save_ICP, ICP);
+ if (uart_console(port))
+ console_unlock();
+
port->irq = (irq > 0) ? irq : 0;
}
@@ -1807,9 +1813,6 @@ int serial8250_do_startup(struct uart_port *port)
unsigned char lsr, iir;
int retval;
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
if (!port->fifosize)
port->fifosize = uart_config[port->type].fifo_size;
if (!up->tx_loadsz)
@@ -2230,6 +2233,23 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_port_out(port, 0x2, quot_frac);
}
+static unsigned int
+serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int tolerance = port->uartclk / 100;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ * Allow 1% tolerance at the upper limit so uart clks marginally
+ * slower than nominal still match standard baud rates without
+ * causing transmission errors.
+ */
+ return uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ (port->uartclk + tolerance) / 16);
+}
+
void
serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -2241,12 +2261,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
cval = serial8250_compute_lcr(up, termios->c_cflag);
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
+ baud = serial8250_get_baud_rate(port, termios, old);
quot = serial8250_get_divisor(up, baud, &frac);
/*
@@ -2513,14 +2528,8 @@ static void serial8250_release_port(struct uart_port *port)
static int serial8250_request_port(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
- int ret;
-
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
- ret = serial8250_request_std_resource(up);
- return ret;
+ return serial8250_request_std_resource(up);
}
static int fcr_get_rxtrig_bytes(struct uart_8250_port *up)
@@ -2668,9 +2677,6 @@ static void serial8250_config_port(struct uart_port *port, int flags)
struct uart_8250_port *up = up_to_u8250p(port);
int ret;
- if (port->type == PORT_8250_CIR)
- return;
-
/*
* Find the region that we can probe for. This in turn
* tells us whether we can probe for the type of port.
@@ -2805,6 +2811,27 @@ static void serial8250_console_putchar(struct uart_port *port, int ch)
}
/*
+ * Restore serial console when h/w power-off detected
+ */
+static void serial8250_console_restore(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ struct ktermios termios;
+ unsigned int baud, quot, frac = 0;
+
+ termios.c_cflag = port->cons->cflag;
+ if (port->state->port.tty && termios.c_cflag == 0)
+ termios.c_cflag = port->state->port.tty->termios.c_cflag;
+
+ baud = serial8250_get_baud_rate(port, &termios, NULL);
+ quot = serial8250_get_divisor(up, baud, &frac);
+
+ serial8250_set_divisor(port, baud, quot, frac);
+ serial_port_out(port, UART_LCR, up->lcr);
+ serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
+}
+
+/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*
@@ -2841,22 +2868,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
/* check scratch reg to see if port powered off during system sleep */
if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
- struct ktermios termios;
- unsigned int baud, quot, frac = 0;
-
- termios.c_cflag = port->cons->cflag;
- if (port->state->port.tty && termios.c_cflag == 0)
- termios.c_cflag = port->state->port.tty->termios.c_cflag;
-
- baud = uart_get_baud_rate(port, &termios, NULL,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
- quot = serial8250_get_divisor(up, baud, &frac);
-
- serial8250_set_divisor(port, baud, quot, frac);
- serial_port_out(port, UART_LCR, up->lcr);
- serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
-
+ serial8250_console_restore(up);
up->canary = 0;
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e1de118..e6f5e12 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -274,8 +274,8 @@ config SERIAL_8250_ACORN
config SERIAL_8250_FSL
bool
- depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
- default PPC
+ depends on SERIAL_8250_CONSOLE
+ default PPC || ARM || ARM64
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
@@ -294,11 +294,12 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
+ depends on SERIAL_8250
+ default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
help
- If you have a Ralink RT288x/RT305x SoC based board and want to use the
- serial port, say Y to this option. The driver can handle up to 2 serial
- ports. If unsure, say N.
+ Selecting this option will add support for the alternate register
+ layout used by Ralink RT288x/RT305x, Alchemy Au1xxx, and some others.
+ If unsure, say N.
config SERIAL_8250_OMAP
tristate "Support for OMAP internal UART (8250 based driver)"
@@ -337,7 +338,7 @@ config SERIAL_8250_FINTEK
through the PNP driver. If unsure, say N.
config SERIAL_8250_LPC18XX
- bool "NXP LPC18xx/43xx serial port support"
+ tristate "NXP LPC18xx/43xx serial port support"
depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
default ARCH_LPC18XX
help
@@ -366,3 +367,13 @@ config SERIAL_8250_INGENIC
help
If you have a system using an Ingenic SoC and wish to make use of
its UARTs, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_MID
+ tristate "Support for serial ports on Intel MID platforms"
+ depends on SERIAL_8250 && PCI
+ select HSU_DMA if SERIAL_8250_DMA
+ select HSU_DMA_PCI if X86_INTEL_MID
+ help
+ Selecting this option will enable handling of the extra features
+ present on the UART found on Intel Medfield SOC and various other
+ Intel platforms.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 39c6d22..e177f86 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -27,5 +27,6 @@ obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
+obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 687b1ea..1aec440 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -115,9 +115,9 @@ config SERIAL_SB1250_DUART_CONSOLE
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91 || AVR32 || COMPILE_TEST
select SERIAL_CORE
- select SERIAL_MCTRL_GPIO
+ select SERIAL_MCTRL_GPIO if GPIOLIB
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
@@ -571,7 +571,7 @@ config BFIN_UART3_CTSRTS
config SERIAL_IMX
tristate "IMX serial port support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
select SERIAL_CORE
select RATIONAL
help
@@ -582,6 +582,7 @@ config SERIAL_IMX_CONSOLE
bool "Console on IMX serial port"
depends on SERIAL_IMX=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON if OF
help
If you have enabled the serial port on the Freescale IMX
CPU you can make it the console by answering Y to this option.
@@ -743,7 +744,7 @@ config SERIAL_SH_SCI_CONSOLE
config SERIAL_SH_SCI_DMA
bool "DMA support"
- depends on SERIAL_SH_SCI && SH_DMAE
+ depends on SERIAL_SH_SCI && DMA_ENGINE
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
@@ -1408,7 +1409,7 @@ config SERIAL_PCH_UART_CONSOLE
warnings and which allows logins in single user mode).
config SERIAL_MXS_AUART
- depends on ARCH_MXS
+ depends on ARCH_MXS || COMPILE_TEST
tristate "MXS AUART support"
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -1538,6 +1539,7 @@ config SERIAL_FSL_LPUART
tristate "Freescale lpuart serial port support"
depends on HAS_DMA
select SERIAL_CORE
+ select SERIAL_EARLYCON
help
Support for the on-chip lpuart on some Freescale SOCs.
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index fd87a6f..61b607f 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -508,29 +508,6 @@ static struct uart_driver altera_uart_driver = {
.cons = ALTERA_UART_CONSOLE,
};
-#ifdef CONFIG_OF
-static int altera_uart_get_of_uartclk(struct platform_device *pdev,
- struct uart_port *port)
-{
- int len;
- const __be32 *clk;
-
- clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
- if (!clk || len < sizeof(__be32))
- return -ENODEV;
-
- port->uartclk = be32_to_cpup(clk);
-
- return 0;
-}
-#else
-static int altera_uart_get_of_uartclk(struct platform_device *pdev,
- struct uart_port *port)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_OF */
-
static int altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev);
@@ -570,7 +547,8 @@ static int altera_uart_probe(struct platform_device *pdev)
if (platp)
port->uartclk = platp->uartclk;
else {
- ret = altera_uart_get_of_uartclk(pdev, port);
+ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &port->uartclk);
if (ret)
return ret;
}
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index fd27e98..899a771 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -191,8 +191,8 @@ struct uart_amba_port {
*/
static int pl011_fifo_to_tty(struct uart_amba_port *uap)
{
- u16 status, ch;
- unsigned int flag, max_count = 256;
+ u16 status;
+ unsigned int ch, flag, max_count = 256;
int fifotaken = 0;
while (max_count--) {
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index f3af317..75eb083 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -581,6 +581,7 @@ static const struct of_device_id apbuart_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, apbuart_match);
static struct platform_driver grlib_apbuart_of_driver = {
.probe = apbuart_probe,
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 538ea03..9429455 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -112,6 +112,12 @@ struct atmel_uart_char {
#define ATMEL_SERIAL_RINGSIZE 1024
/*
+ * at91: 6 USARTs and one DBGU port (SAM9260)
+ * avr32: 4
+ */
+#define ATMEL_MAX_UART 7
+
+/*
* We wrap our port structure around the generic uart_port.
*/
struct atmel_uart_port {
@@ -921,7 +927,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_tx,
virt_to_page(port->state->xmit.buf),
UART_XMIT_SIZE,
- (int)port->state->xmit.buf & ~PAGE_MASK);
+ (unsigned long)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_tx,
1,
@@ -931,10 +937,10 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
sg_dma_len(&atmel_port->sg_tx),
port->state->xmit.buf,
- sg_dma_address(&atmel_port->sg_tx));
+ &sg_dma_address(&atmel_port->sg_tx));
}
/* Configure the slave DMA */
@@ -1103,7 +1109,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_rx,
virt_to_page(ring->buf),
sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE,
- (int)ring->buf & ~PAGE_MASK);
+ (unsigned long)ring->buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_rx,
1,
@@ -1113,10 +1119,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
sg_dma_len(&atmel_port->sg_rx),
ring->buf,
- sg_dma_address(&atmel_port->sg_rx));
+ &sg_dma_address(&atmel_port->sg_rx));
}
/* Configure the slave DMA */
@@ -1676,15 +1682,15 @@ static void atmel_init_rs485(struct uart_port *port,
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
if (np) {
+ struct serial_rs485 *rs485conf = &port->rs485;
u32 rs485_delay[2];
/* rs485 properties */
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
- struct serial_rs485 *rs485conf = &port->rs485;
-
rs485conf->delay_rts_before_send = rs485_delay[0];
rs485conf->delay_rts_after_send = rs485_delay[1];
rs485conf->flags = 0;
+ }
if (of_get_property(np, "rs485-rx-during-tx", NULL))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
@@ -1692,7 +1698,6 @@ static void atmel_init_rs485(struct uart_port *port,
if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
NULL))
rs485conf->flags |= SER_RS485_ENABLED;
- }
} else {
port->rs485 = pdata->rs485;
}
@@ -2296,7 +2301,7 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (port->uartclk / 16 != ser->baud_base)
ret = -EINVAL;
- if ((void *)port->mapbase != ser->iomem_base)
+ if (port->mapbase != (unsigned long)ser->iomem_base)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
@@ -2686,7 +2691,7 @@ static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
- p->gpios = mctrl_gpio_init(dev, 0);
+ p->gpios = mctrl_gpio_init_noauto(dev, 0);
if (IS_ERR(p->gpios))
return PTR_ERR(p->gpios);
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index d5d2dd7..b3a4e0c 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -500,7 +500,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, s);
- s->gpios = mctrl_gpio_init(&pdev->dev, 0);
+ s->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
if (IS_ERR(s->gpios))
return PTR_ERR(s->gpios);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 08431ad..d3e3d42 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1450,6 +1450,7 @@ static const struct of_device_id cpm_uart_match[] = {
},
{}
};
+MODULE_DEVICE_TABLE(of, cpm_uart_match);
static struct platform_driver cpm_uart_driver = {
.driver = {
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 3e4470a..f13f2eb 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3655,7 +3655,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
wake_up_interruptible(&info->port.open_wait);
}
info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->port.close_wait);
local_irq_restore(flags);
/* port closed */
@@ -3759,23 +3758,6 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
int do_clocal = 0;
/*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- if (info->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
@@ -3825,7 +3807,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
#endif
break;
}
- if (!(info->port.flags & ASYNC_CLOSING) && do_clocal)
+ if (do_clocal)
/* && (do_clocal || DCD_IS_ASSERTED) */
break;
if (signal_pending(current)) {
@@ -3895,20 +3877,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY);
/*
- * If the port is in the middle of closing, bail out now
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- return ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If DMA is enabled try to allocate the irq's.
*/
if (info->port.count == 1) {
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 08ce76f..3d79003 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1746,6 +1746,45 @@ static struct console lpuart32_console = {
.data = &lpuart_reg,
};
+static void lpuart_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, lpuart_console_putchar);
+}
+
+static void lpuart32_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, lpuart32_console_putchar);
+}
+
+static int __init lpuart_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = lpuart_early_write;
+ return 0;
+}
+
+static int __init lpuart32_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = lpuart32_early_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
+EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
+EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
+
#define LPUART_CONSOLE (&lpuart_console)
#define LPUART32_CONSOLE (&lpuart32_console)
#else
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d0388a0..016e4be 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -139,6 +139,7 @@
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
@@ -728,11 +729,15 @@ static void imx_dma_rxint(struct imx_port *sport)
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
sport->dma_is_rxing = 1;
- /* disable the `Recerver Ready Interrrupt` */
+ /* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_ATEN);
+ writel(temp, sport->port.membase + UCR2);
+
/* tell the DMA to receive the data. */
start_rx_dma(sport);
}
@@ -749,7 +754,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
sts = readl(sport->port.membase + USR1);
sts2 = readl(sport->port.membase + USR2);
- if (sts & USR1_RRDY) {
+ if (sts & (USR1_RRDY | USR1_AGTIM)) {
if (sport->dma_is_enabled)
imx_dma_rxint(sport);
else
@@ -852,19 +857,6 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&sport->port.lock, flags);
}
-#define TXTL 2 /* reset default */
-#define RXTL 1 /* reset default */
-
-static void imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
-{
- unsigned int val;
-
- /* set receiver / transmitter trigger level */
- val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
- val |= TXTL << UFCR_TXTL_SHF | RXTL;
- writel(val, sport->port.membase + UFCR);
-}
-
#define RX_BUF_SIZE (PAGE_SIZE)
static void imx_rx_dma_done(struct imx_port *sport)
{
@@ -873,11 +865,15 @@ static void imx_rx_dma_done(struct imx_port *sport)
spin_lock_irqsave(&sport->port.lock, flags);
- /* Enable this interrupt when the RXFIFO is empty. */
+ /* re-enable interrupts to get notified when new symbols are incoming */
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN;
writel(temp, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR2);
+ temp |= UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
+
sport->dma_is_rxing = 0;
/* Is the shutdown waiting for us? */
@@ -888,14 +884,12 @@ static void imx_rx_dma_done(struct imx_port *sport)
}
/*
- * There are three kinds of RX DMA interrupts(such as in the MX6Q):
+ * There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
- * [2] the Aging timer expires(wait for 8 bytes long)
- * [3] the Idle Condition Detect(enabled the UCR4_IDDMAEN).
+ * [2] the aging timer expires
*
- * The [2] is trigger when a character was been sitting in the FIFO
- * meanwhile [3] can wait for 32 bytes long when the RX line is
- * on IDLE state and RxFIFO is empty.
+ * Condition [2] is triggered when a character has been sitting in the FIFO
+ * for at least 8 byte durations.
*/
static void dma_rx_callback(void *data)
{
@@ -913,13 +907,6 @@ static void dma_rx_callback(void *data)
status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
count = RX_BUF_SIZE - state.residue;
- if (readl(sport->port.membase + USR2) & USR2_IDLE) {
- /* In condition [3] the SDMA counted up too early */
- count--;
-
- writel(USR2_IDLE, sport->port.membase + USR2);
- }
-
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
@@ -931,23 +918,21 @@ static void dma_rx_callback(void *data)
sport->port.icount.buf_overrun++;
}
tty_flip_buffer_push(port);
+ sport->port.icount.rx += count;
+ }
+ /*
+ * Restart RX DMA directly if more data is available in order to skip
+ * the roundtrip through the IRQ handler. If there is some data already
+ * in the FIFO, DMA needs to be restarted soon anyways.
+ *
+ * Otherwise stop the DMA and reactivate FIFO IRQs to restart DMA once
+ * data starts to arrive again.
+ */
+ if (readl(sport->port.membase + USR2) & USR2_RDR)
start_rx_dma(sport);
- } else if (readl(sport->port.membase + USR2) & USR2_RDR) {
- /*
- * start rx_dma directly once data in RXFIFO, more efficient
- * than before:
- * 1. call imx_rx_dma_done to stop dma if no data received
- * 2. wait next RDR interrupt to start dma transfer.
- */
- start_rx_dma(sport);
- } else {
- /*
- * stop dma to prevent too many IDLE event trigged if no data
- * in RXFIFO
- */
+ else
imx_rx_dma_done(sport);
- }
}
static int start_rx_dma(struct imx_port *sport)
@@ -980,6 +965,22 @@ static int start_rx_dma(struct imx_port *sport)
return 0;
}
+#define TXTL_DEFAULT 2 /* reset default */
+#define RXTL_DEFAULT 1 /* reset default */
+#define TXTL_DMA 8 /* DMA burst setting */
+#define RXTL_DMA 9 /* DMA burst setting */
+
+static void imx_setup_ufcr(struct imx_port *sport,
+ unsigned char txwl, unsigned char rxwl)
+{
+ unsigned int val;
+
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= txwl << UFCR_TXTL_SHF | rxwl;
+ writel(val, sport->port.membase + UFCR);
+}
+
static void imx_uart_dma_exit(struct imx_port *sport)
{
if (sport->dma_chan_rx) {
@@ -1015,7 +1016,8 @@ static int imx_uart_dma_init(struct imx_port *sport)
slave_config.direction = DMA_DEV_TO_MEM;
slave_config.src_addr = sport->port.mapbase + URXD0;
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.src_maxburst = RXTL;
+ /* one byte less than the watermark level to enable the aging timer */
+ slave_config.src_maxburst = RXTL_DMA - 1;
ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config);
if (ret) {
dev_err(dev, "error in RX dma configuration.\n");
@@ -1039,7 +1041,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
slave_config.direction = DMA_MEM_TO_DEV;
slave_config.dst_addr = sport->port.mapbase + URTX0;
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.dst_maxburst = TXTL;
+ slave_config.dst_maxburst = TXTL_DMA;
ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config);
if (ret) {
dev_err(dev, "error in TX dma configuration.");
@@ -1062,15 +1064,14 @@ static void imx_enable_dma(struct imx_port *sport)
/* set UCR1 */
temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN |
- /* wait for 32 idle frames for IDDMA interrupt */
- UCR1_ICD_REG(3);
+ temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN;
writel(temp, sport->port.membase + UCR1);
- /* set UCR4 */
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_IDDMAEN;
- writel(temp, sport->port.membase + UCR4);
+ temp = readl(sport->port.membase + UCR2);
+ temp |= UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
+
+ imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
sport->dma_is_enabled = 1;
}
@@ -1086,13 +1087,10 @@ static void imx_disable_dma(struct imx_port *sport)
/* clear UCR2 */
temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_CTSC | UCR2_CTS);
+ temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
writel(temp, sport->port.membase + UCR2);
- /* clear UCR4 */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~UCR4_IDDMAEN;
- writel(temp, sport->port.membase + UCR4);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
sport->dma_is_enabled = 0;
}
@@ -1115,7 +1113,7 @@ static int imx_startup(struct uart_port *port)
return retval;
}
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
/* disable the DREN bit (Data Ready interrupt enable) before
* requesting IRQs
@@ -1128,6 +1126,11 @@ static int imx_startup(struct uart_port *port)
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
+ /* Can we enable the DMA support? */
+ if (is_imx6q_uart(sport) && !uart_console(port) &&
+ !sport->dma_is_inited)
+ imx_uart_dma_init(sport);
+
spin_lock_irqsave(&sport->port.lock, flags);
/* Reset fifo's and state machines */
i = 100;
@@ -1145,6 +1148,9 @@ static int imx_startup(struct uart_port *port)
writel(USR1_RTSD, sport->port.membase + USR1);
writel(USR2_ORE, sport->port.membase + USR2);
+ if (sport->dma_is_inited && !sport->dma_is_enabled)
+ imx_enable_dma(sport);
+
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
@@ -1278,7 +1284,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
- unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
+ unsigned int ucr2, old_ucr1, old_ucr2, baud, quot;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
unsigned int div, ufcr;
unsigned long num, denom;
@@ -1315,11 +1321,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
} else {
ucr2 |= UCR2_CTSC;
}
-
- /* Can we enable the DMA support? */
- if (is_imx6q_uart(sport) && !uart_console(port)
- && !sport->dma_is_inited)
- imx_uart_dma_init(sport);
} else {
termios->c_cflag &= ~CRTSCTS;
}
@@ -1387,10 +1388,10 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
barrier();
/* then, disable everything */
- old_txrxen = readl(sport->port.membase + UCR2);
- writel(old_txrxen & ~(UCR2_TXEN | UCR2_RXEN),
+ old_ucr2 = readl(sport->port.membase + UCR2);
+ writel(old_ucr2 & ~(UCR2_TXEN | UCR2_RXEN),
sport->port.membase + UCR2);
- old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
+ old_ucr2 &= (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN);
/* custom-baudrate handling */
div = sport->port.uartclk / (baud * 16);
@@ -1431,13 +1432,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
writel(old_ucr1, sport->port.membase + UCR1);
/* set the parity, stop bits and data size */
- writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
+ writel(ucr2 | old_ucr2, sport->port.membase + UCR2);
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
imx_enable_ms(&sport->port);
- if (sport->dma_is_inited && !sport->dma_is_enabled)
- imx_enable_dma(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
}
@@ -1503,7 +1502,7 @@ static int imx_poll_init(struct uart_port *port)
if (retval)
clk_disable_unprepare(sport->clk_ipg);
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
spin_lock_irqsave(&sport->port.lock, flags);
@@ -1773,7 +1772,7 @@ imx_console_setup(struct console *co, char *options)
else
imx_console_get_options(sport, &baud, &parity, &bits);
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
@@ -1803,6 +1802,38 @@ static struct console imx_console = {
};
#define IMX_CONSOLE &imx_console
+
+#ifdef CONFIG_OF
+static void imx_console_early_putchar(struct uart_port *port, int ch)
+{
+ while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL)
+ cpu_relax();
+
+ writel_relaxed(ch, port->membase + URTX0);
+}
+
+static void imx_console_early_write(struct console *con, const char *s,
+ unsigned count)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, count, imx_console_early_putchar);
+}
+
+static int __init
+imx_console_early_setup(struct earlycon_device *dev, const char *opt)
+{
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ dev->con->write = imx_console_early_write;
+
+ return 0;
+}
+OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
+OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
+#endif
+
#else
#define IMX_CONSOLE NULL
#endif
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index e92d7eb..7eb04ae 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -691,12 +691,13 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
p->port.mapbase = res->start;
p->port.membase = NULL;
- p->port.irq = platform_get_irq(pdev, 0);
- if (p->port.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
uarts_registered);
- return p->port.irq;
+ return ret;
}
+ p->port.irq = ret;
p->port.iotype = UPIO_MEM32;
p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index b90e7b3..3141aa2 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -35,8 +35,6 @@
#define MEN_Z135_BAUD_REG 0x810
#define MEN_Z135_TIMEOUT 0x814
-#define MEN_Z135_MEM_SIZE 0x818
-
#define IRQ_ID(x) ((x) & 0x1f)
#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */
@@ -124,6 +122,7 @@ MODULE_PARM_DESC(rx_timeout, "RX timeout. "
struct men_z135_port {
struct uart_port port;
struct mcb_device *mdev;
+ struct resource *mem;
unsigned char *rxbuf;
u32 stat_reg;
spinlock_t lock;
@@ -734,22 +733,30 @@ static const char *men_z135_type(struct uart_port *port)
static void men_z135_release_port(struct uart_port *port)
{
+ struct men_z135_port *uart = to_men_z135(port);
+
iounmap(port->membase);
port->membase = NULL;
- release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ mcb_release_mem(uart->mem);
}
static int men_z135_request_port(struct uart_port *port)
{
- int size = MEN_Z135_MEM_SIZE;
+ struct men_z135_port *uart = to_men_z135(port);
+ struct mcb_device *mdev = uart->mdev;
+ struct resource *mem;
+
+ mem = mcb_request_mem(uart->mdev, dev_name(&mdev->dev));
+ if (IS_ERR(mem))
+ return PTR_ERR(mem);
- if (!request_mem_region(port->mapbase, size, "men_z135_port"))
- return -EBUSY;
+ port->mapbase = mem->start;
+ uart->mem = mem;
- port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+ port->membase = ioremap(mem->start, resource_size(mem));
if (port->membase == NULL) {
- release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ mcb_release_mem(mem);
return -ENOMEM;
}
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 41de374..8c3e513 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1135,6 +1135,13 @@ mpc52xx_uart_startup(struct uart_port *port)
psc_ops->command(port, MPC52xx_PSC_RST_RX);
psc_ops->command(port, MPC52xx_PSC_RST_TX);
+ /*
+ * According to Freescale's support the RST_TX command can produce a
+ * spike on the TX pin. So they recommend to delay "for one character".
+ * One millisecond should be enough for everyone.
+ */
+ msleep(1);
+
psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */
psc_ops->fifo_init(port);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 82bb6d1..cadfd1c 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -55,8 +55,6 @@
#define SUPPORT_SYSRQ
#endif
-#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/ioport.h>
@@ -755,7 +753,7 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
pi->port.line);
if (!pi->dma_region) {
- if (!dma_supported(pi->port.dev, 0xffffffff)) {
+ if (!dma_set_mask(pi->port.dev, 0xffffffff)) {
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
rc = -ENXIO;
} else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
@@ -2108,26 +2106,11 @@ static int mpsc_drv_probe(struct platform_device *dev)
return rc;
}
-static int mpsc_drv_remove(struct platform_device *dev)
-{
- pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
-
- if (dev->id < MPSC_NUM_CTLRS) {
- uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
- mpsc_release_port((struct uart_port *)
- &mpsc_ports[dev->id].port);
- mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
- return 0;
- } else {
- return -ENODEV;
- }
-}
-
static struct platform_driver mpsc_driver = {
.probe = mpsc_drv_probe,
- .remove = mpsc_drv_remove,
.driver = {
- .name = MPSC_CTLR_NAME,
+ .name = MPSC_CTLR_NAME,
+ .suppress_bind_attrs = true,
},
};
@@ -2156,22 +2139,10 @@ static int __init mpsc_drv_init(void)
return rc;
}
+device_initcall(mpsc_drv_init);
-static void __exit mpsc_drv_exit(void)
-{
- platform_driver_unregister(&mpsc_driver);
- platform_driver_unregister(&mpsc_shared_driver);
- uart_unregister_driver(&mpsc_reg);
- memset(mpsc_ports, 0, sizeof(mpsc_ports));
- memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
-}
-
-module_init(mpsc_drv_init);
-module_exit(mpsc_drv_exit);
-
+/*
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
-MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
-MODULE_ALIAS("platform:" MPSC_CTLR_NAME);
+*/
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b73889c..dcde955 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -20,6 +20,8 @@
#endif
#include <linux/atomic.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -31,6 +33,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -39,6 +42,11 @@
#include "msm_serial.h"
+#define UARTDM_BURST_SIZE 16 /* in bytes */
+#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */
+#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */
+#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4)
+
enum {
UARTDM_1P1 = 1,
UARTDM_1P2,
@@ -46,6 +54,17 @@ enum {
UARTDM_1P4,
};
+struct msm_dma {
+ struct dma_chan *chan;
+ enum dma_data_direction dir;
+ dma_addr_t phys;
+ unsigned char *virt;
+ dma_cookie_t cookie;
+ u32 enable_bit;
+ unsigned int count;
+ struct dma_async_tx_descriptor *desc;
+};
+
struct msm_port {
struct uart_port uart;
char name[16];
@@ -55,9 +74,153 @@ struct msm_port {
int is_uartdm;
unsigned int old_snap_state;
bool break_detected;
+ struct msm_dma tx_dma;
+ struct msm_dma rx_dma;
};
-static inline void wait_for_xmitr(struct uart_port *port)
+static void msm_handle_tx(struct uart_port *port);
+static void msm_start_rx_dma(struct msm_port *msm_port);
+
+void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
+{
+ struct device *dev = port->dev;
+ unsigned int mapped;
+ u32 val;
+
+ mapped = dma->count;
+ dma->count = 0;
+
+ dmaengine_terminate_all(dma->chan);
+
+ /*
+ * DMA Stall happens if enqueue and flush command happens concurrently.
+ * For example before changing the baud rate/protocol configuration and
+ * sending flush command to ADM, disable the channel of UARTDM.
+ * Note: should not reset the receiver here immediately as it is not
+ * suggested to do disable/reset or reset/disable at the same time.
+ */
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ if (mapped)
+ dma_unmap_single(dev, dma->phys, mapped, dma->dir);
+}
+
+static void msm_release_dma(struct msm_port *msm_port)
+{
+ struct msm_dma *dma;
+
+ dma = &msm_port->tx_dma;
+ if (dma->chan) {
+ msm_stop_dma(&msm_port->uart, dma);
+ dma_release_channel(dma->chan);
+ }
+
+ memset(dma, 0, sizeof(*dma));
+
+ dma = &msm_port->rx_dma;
+ if (dma->chan) {
+ msm_stop_dma(&msm_port->uart, dma);
+ dma_release_channel(dma->chan);
+ kfree(dma->virt);
+ }
+
+ memset(dma, 0, sizeof(*dma));
+}
+
+static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
+{
+ struct device *dev = msm_port->uart.dev;
+ struct dma_slave_config conf;
+ struct msm_dma *dma;
+ u32 crci = 0;
+ int ret;
+
+ dma = &msm_port->tx_dma;
+
+ /* allocate DMA resources, if available */
+ dma->chan = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(dma->chan))
+ goto no_tx;
+
+ of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
+
+ memset(&conf, 0, sizeof(conf));
+ conf.direction = DMA_MEM_TO_DEV;
+ conf.device_fc = true;
+ conf.dst_addr = base + UARTDM_TF;
+ conf.dst_maxburst = UARTDM_BURST_SIZE;
+ conf.slave_id = crci;
+
+ ret = dmaengine_slave_config(dma->chan, &conf);
+ if (ret)
+ goto rel_tx;
+
+ dma->dir = DMA_TO_DEVICE;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
+ else
+ dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
+
+ return;
+
+rel_tx:
+ dma_release_channel(dma->chan);
+no_tx:
+ memset(dma, 0, sizeof(*dma));
+}
+
+static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
+{
+ struct device *dev = msm_port->uart.dev;
+ struct dma_slave_config conf;
+ struct msm_dma *dma;
+ u32 crci = 0;
+ int ret;
+
+ dma = &msm_port->rx_dma;
+
+ /* allocate DMA resources, if available */
+ dma->chan = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(dma->chan))
+ goto no_rx;
+
+ of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
+
+ dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
+ if (!dma->virt)
+ goto rel_rx;
+
+ memset(&conf, 0, sizeof(conf));
+ conf.direction = DMA_DEV_TO_MEM;
+ conf.device_fc = true;
+ conf.src_addr = base + UARTDM_RF;
+ conf.src_maxburst = UARTDM_BURST_SIZE;
+ conf.slave_id = crci;
+
+ ret = dmaengine_slave_config(dma->chan, &conf);
+ if (ret)
+ goto err;
+
+ dma->dir = DMA_FROM_DEVICE;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
+ else
+ dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
+
+ return;
+err:
+ kfree(dma->virt);
+rel_rx:
+ dma_release_channel(dma->chan);
+no_rx:
+ memset(dma, 0, sizeof(*dma));
+}
+
+static inline void msm_wait_for_xmitr(struct uart_port *port)
{
while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
@@ -78,17 +241,277 @@ static void msm_stop_tx(struct uart_port *port)
static void msm_start_tx(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->tx_dma;
+
+ /* Already started in DMA mode */
+ if (dma->count)
+ return;
+
+ msm_port->imr |= UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_reset_dm_count(struct uart_port *port, int count)
+{
+ msm_wait_for_xmitr(port);
+ msm_write(port, count, UARTDM_NCF_TX);
+ msm_read(port, UARTDM_NCF_TX);
+}
+
+static void msm_complete_tx_dma(void *args)
+{
+ struct msm_port *msm_port = args;
+ struct uart_port *port = &msm_port->uart;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ unsigned int count;
+ u32 val;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Already stopped */
+ if (!dma->count)
+ goto done;
+
+ status = dmaengine_tx_status(dma->chan, dma->cookie, &state);
+
+ dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ if (msm_port->is_uartdm > UARTDM_1P3) {
+ msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+ msm_write(port, UART_CR_TX_ENABLE, UART_CR);
+ }
+
+ count = dma->count - state.residue;
+ port->icount.tx += count;
+ dma->count = 0;
+
+ xmit->tail += count;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ /* Restore "Tx FIFO below watermark" interrupt */
msm_port->imr |= UART_IMR_TXLEV;
msm_write(port, msm_port->imr, UART_IMR);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ msm_handle_tx(port);
+done:
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
+{
+ struct circ_buf *xmit = &msm_port->uart.state->xmit;
+ struct uart_port *port = &msm_port->uart;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ void *cpu_addr;
+ int ret;
+ u32 val;
+
+ cpu_addr = &xmit->buf[xmit->tail];
+
+ dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
+ ret = dma_mapping_error(port->dev, dma->phys);
+ if (ret)
+ return ret;
+
+ dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
+ count, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_PREP_FENCE);
+ if (!dma->desc) {
+ ret = -EIO;
+ goto unmap;
+ }
+
+ dma->desc->callback = msm_complete_tx_dma;
+ dma->desc->callback_param = msm_port;
+
+ dma->cookie = dmaengine_submit(dma->desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret)
+ goto unmap;
+
+ /*
+ * Using DMA complete for Tx FIFO reload, no need for
+ * "Tx FIFO below watermark" one, disable it
+ */
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ dma->count = count;
+
+ val = msm_read(port, UARTDM_DMEN);
+ val |= dma->enable_bit;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_write(port, val, UARTDM_DMEN);
+
+ msm_reset_dm_count(port, count);
+
+ if (msm_port->is_uartdm > UARTDM_1P3)
+ msm_write(port, val, UARTDM_DMEN);
+
+ dma_async_issue_pending(dma->chan);
+ return 0;
+unmap:
+ dma_unmap_single(port->dev, dma->phys, count, dma->dir);
+ return ret;
+}
+
+static void msm_complete_rx_dma(void *args)
+{
+ struct msm_port *msm_port = args;
+ struct uart_port *port = &msm_port->uart;
+ struct tty_port *tport = &port->state->port;
+ struct msm_dma *dma = &msm_port->rx_dma;
+ int count = 0, i, sysrq;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Already stopped */
+ if (!dma->count)
+ goto done;
+
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ /* Restore interrupts */
+ msm_port->imr |= UART_IMR_RXLEV | UART_IMR_RXSTALE;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
+
+ port->icount.rx += count;
+
+ dma->count = 0;
+
+ dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
+
+ for (i = 0; i < count; i++) {
+ char flag = TTY_NORMAL;
+
+ if (msm_port->break_detected && dma->virt[i] == 0) {
+ port->icount.brk++;
+ flag = TTY_BREAK;
+ msm_port->break_detected = false;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (!(port->read_status_mask & UART_SR_RX_BREAK))
+ flag = TTY_NORMAL;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
+ spin_lock_irqsave(&port->lock, flags);
+ if (!sysrq)
+ tty_insert_flip_char(tport, dma->virt[i], flag);
+ }
+
+ msm_start_rx_dma(msm_port);
+done:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (count)
+ tty_flip_buffer_push(tport);
+}
+
+static void msm_start_rx_dma(struct msm_port *msm_port)
+{
+ struct msm_dma *dma = &msm_port->rx_dma;
+ struct uart_port *uart = &msm_port->uart;
+ u32 val;
+ int ret;
+
+ if (!dma->chan)
+ return;
+
+ dma->phys = dma_map_single(uart->dev, dma->virt,
+ UARTDM_RX_SIZE, dma->dir);
+ ret = dma_mapping_error(uart->dev, dma->phys);
+ if (ret)
+ return;
+
+ dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
+ UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!dma->desc)
+ goto unmap;
+
+ dma->desc->callback = msm_complete_rx_dma;
+ dma->desc->callback_param = msm_port;
+
+ dma->cookie = dmaengine_submit(dma->desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret)
+ goto unmap;
+ /*
+ * Using DMA for FIFO off-load, no need for "Rx FIFO over
+ * watermark" or "stale" interrupts, disable them
+ */
+ msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+
+ /*
+ * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
+ * we need RXSTALE to flush input DMA fifo to memory
+ */
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_port->imr |= UART_IMR_RXSTALE;
+
+ msm_write(uart, msm_port->imr, UART_IMR);
+
+ dma->count = UARTDM_RX_SIZE;
+
+ dma_async_issue_pending(dma->chan);
+
+ msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+ val = msm_read(uart, UARTDM_DMEN);
+ val |= dma->enable_bit;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_write(uart, val, UARTDM_DMEN);
+
+ msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
+
+ if (msm_port->is_uartdm > UARTDM_1P3)
+ msm_write(uart, val, UARTDM_DMEN);
+
+ return;
+unmap:
+ dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
}
static void msm_stop_rx(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
msm_write(port, msm_port->imr, UART_IMR);
+
+ if (dma->chan)
+ msm_stop_dma(port, dma);
}
static void msm_enable_ms(struct uart_port *port)
@@ -99,7 +522,7 @@ static void msm_enable_ms(struct uart_port *port)
msm_write(port, msm_port->imr, UART_IMR);
}
-static void handle_rx_dm(struct uart_port *port, unsigned int misr)
+static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
{
struct tty_port *tport = &port->state->port;
unsigned int sr;
@@ -169,9 +592,12 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+ /* Try to use DMA */
+ msm_start_rx_dma(msm_port);
}
-static void handle_rx(struct uart_port *port)
+static void msm_handle_rx(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
unsigned int sr;
@@ -224,18 +650,11 @@ static void handle_rx(struct uart_port *port)
spin_lock(&port->lock);
}
-static void reset_dm_count(struct uart_port *port, int count)
-{
- wait_for_xmitr(port);
- msm_write(port, count, UARTDM_NCF_TX);
- msm_read(port, UARTDM_NCF_TX);
-}
-
-static void handle_tx(struct uart_port *port)
+static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
{
struct circ_buf *xmit = &port->state->xmit;
struct msm_port *msm_port = UART_TO_MSM(port);
- unsigned int tx_count, num_chars;
+ unsigned int num_chars;
unsigned int tf_pointer = 0;
void __iomem *tf;
@@ -244,20 +663,8 @@ static void handle_tx(struct uart_port *port)
else
tf = port->membase + UART_TF;
- tx_count = uart_circ_chars_pending(xmit);
- tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail,
- port->fifosize);
-
- if (port->x_char) {
- if (msm_port->is_uartdm)
- reset_dm_count(port, tx_count + 1);
-
- iowrite8_rep(tf, &port->x_char, 1);
- port->icount.tx++;
- port->x_char = 0;
- } else if (tx_count && msm_port->is_uartdm) {
- reset_dm_count(port, tx_count);
- }
+ if (tx_count && msm_port->is_uartdm)
+ msm_reset_dm_count(port, tx_count);
while (tf_pointer < tx_count) {
int i;
@@ -290,20 +697,76 @@ static void handle_tx(struct uart_port *port)
uart_write_wakeup(port);
}
-static void handle_delta_cts(struct uart_port *port)
+static void msm_handle_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ struct circ_buf *xmit = &msm_port->uart.state->xmit;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ unsigned int pio_count, dma_count, dma_min;
+ void __iomem *tf;
+ int err = 0;
+
+ if (port->x_char) {
+ if (msm_port->is_uartdm)
+ tf = port->membase + UARTDM_TF;
+ else
+ tf = port->membase + UART_TF;
+
+ if (msm_port->is_uartdm)
+ msm_reset_dm_count(port, 1);
+
+ iowrite8_rep(tf, &port->x_char, 1);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ msm_stop_tx(port);
+ return;
+ }
+
+ pio_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+ dma_min = 1; /* Always DMA */
+ if (msm_port->is_uartdm > UARTDM_1P3) {
+ dma_count = UARTDM_TX_AIGN(dma_count);
+ dma_min = UARTDM_BURST_SIZE;
+ } else {
+ if (dma_count > UARTDM_TX_MAX)
+ dma_count = UARTDM_TX_MAX;
+ }
+
+ if (pio_count > port->fifosize)
+ pio_count = port->fifosize;
+
+ if (!dma->chan || dma_count < dma_min)
+ msm_handle_tx_pio(port, pio_count);
+ else
+ err = msm_handle_tx_dma(msm_port, dma_count);
+
+ if (err) /* fall back to PIO mode */
+ msm_handle_tx_pio(port, pio_count);
+}
+
+static void msm_handle_delta_cts(struct uart_port *port)
{
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
port->icount.cts++;
wake_up_interruptible(&port->state->port.delta_msr_wait);
}
-static irqreturn_t msm_irq(int irq, void *dev_id)
+static irqreturn_t msm_uart_irq(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
+ unsigned long flags;
unsigned int misr;
+ u32 val;
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
misr = msm_read(port, UART_MISR);
msm_write(port, 0, UART_IMR); /* disable interrupt */
@@ -313,18 +776,29 @@ static irqreturn_t msm_irq(int irq, void *dev_id)
}
if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
- if (msm_port->is_uartdm)
- handle_rx_dm(port, misr);
- else
- handle_rx(port);
+ if (dma->count) {
+ val = UART_CR_CMD_STALE_EVENT_DISABLE;
+ msm_write(port, val, UART_CR);
+ val = UART_CR_CMD_RESET_STALE_INT;
+ msm_write(port, val, UART_CR);
+ /*
+ * Flush DMA input fifo to memory, this will also
+ * trigger DMA RX completion
+ */
+ dmaengine_terminate_all(dma->chan);
+ } else if (msm_port->is_uartdm) {
+ msm_handle_rx_dm(port, misr);
+ } else {
+ msm_handle_rx(port);
+ }
}
if (misr & UART_IMR_TXLEV)
- handle_tx(port);
+ msm_handle_tx(port);
if (misr & UART_IMR_DELTA_CTS)
- handle_delta_cts(port);
+ msm_handle_delta_cts(port);
msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -408,6 +882,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
{ 3, 0xdd, 8 },
{ 2, 0xee, 16 },
{ 1, 0xff, 31 },
+ { 0, 0xff, 31 },
};
divisor = uart_get_divisor(port, baud);
@@ -419,21 +894,41 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
return entry; /* Default to smallest divider */
}
-static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
+ unsigned long *saved_flags)
{
- unsigned int rxstale, watermark;
+ unsigned int rxstale, watermark, mask;
struct msm_port *msm_port = UART_TO_MSM(port);
const struct msm_baud_map *entry;
+ unsigned long flags;
entry = msm_find_best_baud(port, baud);
msm_write(port, entry->code, UART_CSR);
+ if (baud > 460800)
+ port->uartclk = baud * 16;
+
+ flags = *saved_flags;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ clk_set_rate(msm_port->clk, port->uartclk);
+
+ spin_lock_irqsave(&port->lock, flags);
+ *saved_flags = flags;
+
/* RX stale watermark */
rxstale = entry->rxstale;
watermark = UART_IPR_STALE_LSB & rxstale;
- watermark |= UART_IPR_RXSTALE_LAST;
- watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ if (msm_port->is_uartdm) {
+ mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
+ } else {
+ watermark |= UART_IPR_RXSTALE_LAST;
+ mask = UART_IPR_STALE_TIMEOUT_MSB;
+ }
+
+ watermark |= mask & (rxstale << 2);
+
msm_write(port, watermark, UART_IPR);
/* set RX watermark */
@@ -476,13 +971,13 @@ static void msm_init_clock(struct uart_port *port)
static int msm_startup(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
- unsigned int data, rfr_level;
+ unsigned int data, rfr_level, mask;
int ret;
snprintf(msm_port->name, sizeof(msm_port->name),
"msm_serial%d", port->line);
- ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+ ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
msm_port->name, port);
if (unlikely(ret))
return ret;
@@ -496,11 +991,23 @@ static int msm_startup(struct uart_port *port)
/* set automatic RFR level */
data = msm_read(port, UART_MR1);
- data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+
+ if (msm_port->is_uartdm)
+ mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
+ else
+ mask = UART_MR1_AUTO_RFR_LEVEL1;
+
+ data &= ~mask;
data &= ~UART_MR1_AUTO_RFR_LEVEL0;
- data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= mask & (rfr_level << 2);
data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
msm_write(port, data, UART_MR1);
+
+ if (msm_port->is_uartdm) {
+ msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
+ msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
+ }
+
return 0;
}
@@ -511,6 +1018,9 @@ static void msm_shutdown(struct uart_port *port)
msm_port->imr = 0;
msm_write(port, 0, UART_IMR); /* disable interrupts */
+ if (msm_port->is_uartdm)
+ msm_release_dma(msm_port);
+
clk_disable_unprepare(msm_port->clk);
free_irq(port->irq, port);
@@ -519,14 +1029,19 @@ static void msm_shutdown(struct uart_port *port)
static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
unsigned long flags;
unsigned int baud, mr;
spin_lock_irqsave(&port->lock, flags);
+ if (dma->chan) /* Terminate if any */
+ msm_stop_dma(port, dma);
+
/* calculate and set baud rate */
- baud = uart_get_baud_rate(port, termios, old, 300, 115200);
- baud = msm_set_baud_rate(port, baud);
+ baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
+ baud = msm_set_baud_rate(port, baud, &flags);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -588,6 +1103,9 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
uart_update_timeout(port, termios->c_cflag, baud);
+ /* Try to use DMA */
+ msm_start_rx_dma(msm_port);
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -765,7 +1283,7 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c)
msm_write(port, 0, UART_IMR);
if (msm_port->is_uartdm)
- reset_dm_count(port, 1);
+ msm_reset_dm_count(port, 1);
/* Wait until FIFO is empty */
while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
@@ -839,7 +1357,7 @@ static struct msm_port msm_uart_ports[] = {
#define UART_NR ARRAY_SIZE(msm_uart_ports)
-static inline struct uart_port *get_port_from_line(unsigned int line)
+static inline struct uart_port *msm_get_port_from_line(unsigned int line)
{
return &msm_uart_ports[line].uart;
}
@@ -866,7 +1384,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
spin_lock(&port->lock);
if (is_uartdm)
- reset_dm_count(port, count);
+ msm_reset_dm_count(port, count);
i = 0;
while (i < count) {
@@ -911,7 +1429,7 @@ static void msm_console_write(struct console *co, const char *s,
BUG_ON(co->index < 0 || co->index >= UART_NR);
- port = get_port_from_line(co->index);
+ port = msm_get_port_from_line(co->index);
msm_port = UART_TO_MSM(port);
__msm_console_write(port, s, count, msm_port->is_uartdm);
@@ -928,7 +1446,7 @@ static int __init msm_console_setup(struct console *co, char *options)
if (unlikely(co->index >= UART_NR || co->index < 0))
return -ENXIO;
- port = get_port_from_line(co->index);
+ port = msm_get_port_from_line(co->index);
if (unlikely(!port->membase))
return -ENXIO;
@@ -1043,7 +1561,7 @@ static int msm_serial_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
- port = get_port_from_line(line);
+ port = msm_get_port_from_line(line);
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 737f69f..1786458 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -20,11 +20,12 @@
#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
-#define UART_MR1_RX_RDY_CTL (1 << 7)
-#define UART_MR1_CTS_CTL (1 << 6)
+#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
+#define UART_MR1_RX_RDY_CTL BIT(7)
+#define UART_MR1_CTS_CTL BIT(6)
#define UART_MR2 0x0004
-#define UART_MR2_ERROR_MODE (1 << 6)
+#define UART_MR2_ERROR_MODE BIT(6)
#define UART_MR2_BITS_PER_CHAR 0x30
#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
@@ -58,26 +59,28 @@
#define UART_CR_CMD_SET_RFR (13 << 4)
#define UART_CR_CMD_RESET_RFR (14 << 4)
#define UART_CR_CMD_PROTECTION_EN (16 << 4)
+#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
#define UART_CR_CMD_FORCE_STALE (4 << 8)
#define UART_CR_CMD_RESET_TX_READY (3 << 8)
-#define UART_CR_TX_DISABLE (1 << 3)
-#define UART_CR_TX_ENABLE (1 << 2)
-#define UART_CR_RX_DISABLE (1 << 1)
-#define UART_CR_RX_ENABLE (1 << 0)
+#define UART_CR_TX_DISABLE BIT(3)
+#define UART_CR_TX_ENABLE BIT(2)
+#define UART_CR_RX_DISABLE BIT(1)
+#define UART_CR_RX_ENABLE BIT(0)
#define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
#define UART_IMR 0x0014
-#define UART_IMR_TXLEV (1 << 0)
-#define UART_IMR_RXSTALE (1 << 3)
-#define UART_IMR_RXLEV (1 << 4)
-#define UART_IMR_DELTA_CTS (1 << 5)
-#define UART_IMR_CURRENT_CTS (1 << 6)
-#define UART_IMR_RXBREAK_START (1 << 10)
+#define UART_IMR_TXLEV BIT(0)
+#define UART_IMR_RXSTALE BIT(3)
+#define UART_IMR_RXLEV BIT(4)
+#define UART_IMR_DELTA_CTS BIT(5)
+#define UART_IMR_CURRENT_CTS BIT(6)
+#define UART_IMR_RXBREAK_START BIT(10)
#define UART_IPR_RXSTALE_LAST 0x20
#define UART_IPR_STALE_LSB 0x1F
#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
#define UART_IPR 0x0018
#define UART_TFWR 0x001C
@@ -96,20 +99,20 @@
#define UART_TEST_CTRL 0x0050
#define UART_SR 0x0008
-#define UART_SR_HUNT_CHAR (1 << 7)
-#define UART_SR_RX_BREAK (1 << 6)
-#define UART_SR_PAR_FRAME_ERR (1 << 5)
-#define UART_SR_OVERRUN (1 << 4)
-#define UART_SR_TX_EMPTY (1 << 3)
-#define UART_SR_TX_READY (1 << 2)
-#define UART_SR_RX_FULL (1 << 1)
-#define UART_SR_RX_READY (1 << 0)
+#define UART_SR_HUNT_CHAR BIT(7)
+#define UART_SR_RX_BREAK BIT(6)
+#define UART_SR_PAR_FRAME_ERR BIT(5)
+#define UART_SR_OVERRUN BIT(4)
+#define UART_SR_TX_EMPTY BIT(3)
+#define UART_SR_TX_READY BIT(2)
+#define UART_SR_RX_FULL BIT(1)
+#define UART_SR_RX_READY BIT(0)
#define UART_RF 0x000C
#define UARTDM_RF 0x0070
#define UART_MISR 0x0010
#define UART_ISR 0x0014
-#define UART_ISR_TX_READY (1 << 7)
+#define UART_ISR_TX_READY BIT(7)
#define UARTDM_RXFS 0x50
#define UARTDM_RXFS_BUF_SHIFT 0x7
@@ -119,6 +122,12 @@
#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
+#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */
+#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */
+
+#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */
+#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */
+
#define UARTDM_DMRX 0x34
#define UARTDM_NCF_TX 0x40
#define UARTDM_RX_TOTAL_SNAP 0x38
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7c7f308..cd0414b 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1196,7 +1196,7 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
- s->gpios = mctrl_gpio_init(dev, 0);
+ s->gpios = mctrl_gpio_init_noauto(dev, 0);
if (IS_ERR(s->gpios))
return PTR_ERR(s->gpios);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 6823df9..de50296 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -21,6 +21,10 @@
#include <linux/nwpserial.h>
#include <linux/clk.h>
+#ifdef CONFIG_SERIAL_8250_MODULE
+#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE
+#endif
+
#include "8250/8250.h"
struct of_serial_info {
@@ -150,6 +154,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
break;
}
+ if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
+ (of_device_is_compatible(np, "fsl,ns16550") ||
+ of_device_is_compatible(np, "fsl,16550-FIFO64")))
+ port->handle_irq = fsl8250_handle_irq;
+
return 0;
out:
if (info->clk)
@@ -350,6 +359,7 @@ static const struct of_device_id of_platform_serial_table[] = {
#endif
{ /* end of list */ },
};
+MODULE_DEVICE_TABLE(of, of_platform_serial_table);
static struct platform_driver of_platform_serial_driver = {
.driver = {
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7a2172b..9d4c84f 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -199,6 +199,7 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
serial_out(up, UART_FCR, 0);
}
+#ifdef CONFIG_PM
static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
{
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
@@ -219,6 +220,7 @@ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
pdata->enable_wakeup(up->dev, enable);
}
+#endif /* CONFIG_PM */
/*
* Calculate the absolute difference between the desired and actual baud
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 856686d..d72cd73 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -385,32 +385,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
}
}
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
- unsigned long ufstat);
-
-static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
-{
- struct uart_port *port = &ourport->port;
- struct tty_port *tty = &port->state->port;
- unsigned int ch, ufstat;
- unsigned int count;
-
- ufstat = rd_regl(port, S3C2410_UFSTAT);
- count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
-
- if (!count)
- return;
-
- while (count-- > 0) {
- ch = rd_regb(port, S3C2410_URXH);
-
- ourport->port.icount.rx++;
- tty_insert_flip_char(tty, ch, TTY_NORMAL);
- }
-
- tty_flip_buffer_push(tty);
-}
-
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -573,7 +547,9 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
ourport->rx_mode = S3C24XX_RX_PIO;
}
-static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
+
+static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
{
unsigned int utrstat, ufstat, received;
struct s3c24xx_uart_port *ourport = dev_id;
@@ -606,7 +582,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
enable_rx_pio(ourport);
}
- uart_rx_drain_fifo(ourport);
+ s3c24xx_serial_rx_drain_fifo(ourport);
if (tty) {
tty_flip_buffer_push(t);
@@ -621,16 +597,12 @@ finish:
return IRQ_HANDLED;
}
-static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
{
- struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
unsigned int ufcon, ch, flag, ufstat, uerstat;
- unsigned long flags;
int max_count = port->fifosize;
- spin_lock_irqsave(&port->lock, flags);
-
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -654,9 +626,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
ufcon |= S3C2410_UFCON_RESETRX;
wr_regl(port, S3C2410_UFCON, ufcon);
rx_enabled(port) = 1;
- spin_unlock_irqrestore(&port->lock,
- flags);
- goto out;
+ return;
}
continue;
}
@@ -676,7 +646,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
dbg("break!\n");
port->icount.brk++;
if (uart_handle_break(port))
- goto ignore_char;
+ continue; /* Ignore character */
}
if (uerstat & S3C2410_UERSTAT_FRAME)
@@ -696,19 +666,25 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
}
if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
+ continue; /* Ignore character */
uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
ch, flag);
-
-ignore_char:
- continue;
}
- spin_unlock_irqrestore(&port->lock, flags);
tty_flip_buffer_push(&port->state->port);
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s3c24xx_serial_rx_drain_fifo(ourport);
+ spin_unlock_irqrestore(&port->lock, flags);
-out:
return IRQ_HANDLED;
}
@@ -718,8 +694,8 @@ static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
struct s3c24xx_uart_port *ourport = dev_id;
if (ourport->dma && ourport->dma->rx_chan)
- return s3c24xx_serial_rx_chars_dma(irq, dev_id);
- return s3c24xx_serial_rx_chars_pio(irq, dev_id);
+ return s3c24xx_serial_rx_chars_dma(dev_id);
+ return s3c24xx_serial_rx_chars_pio(dev_id);
}
static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 72ffd0d..1ae8aa6 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1321,6 +1321,9 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
const struct of_device_id *of_id =
of_match_device(sc16is7xx_dt_ids, &spi->dev);
+ if (!of_id)
+ return -ENODEV;
+
devtype = (struct sc16is7xx_devtype *)of_id->data;
} else {
const struct spi_device_id *id_entry = spi_get_device_id(spi);
@@ -1380,6 +1383,9 @@ static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
const struct of_device_id *of_id =
of_match_device(sc16is7xx_dt_ids, &i2c->dev);
+ if (!of_id)
+ return -ENODEV;
+
devtype = (struct sc16is7xx_devtype *)of_id->data;
} else {
devtype = (struct sc16is7xx_devtype *)id->driver_data;
@@ -1420,7 +1426,6 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = {
.id_table = sc16is7xx_i2c_id_table,
};
-MODULE_ALIAS("i2c:sc16is7xx");
#endif
static int __init sc16is7xx_init(void)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index cf0133a..1d6fc60 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -186,7 +186,6 @@ static void set_rts(struct tegra_uart_port *tup, bool active)
tegra_uart_write(tup, mcr, UART_MCR);
tup->mcr_shadow = mcr;
}
- return;
}
static void set_dtr(struct tegra_uart_port *tup, bool active)
@@ -202,7 +201,6 @@ static void set_dtr(struct tegra_uart_port *tup, bool active)
tegra_uart_write(tup, mcr, UART_MCR);
tup->mcr_shadow = mcr;
}
- return;
}
static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
@@ -217,7 +215,6 @@ static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
dtr_enable = !!(mctrl & TIOCM_DTR);
set_dtr(tup, dtr_enable);
- return;
}
static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
@@ -511,7 +508,6 @@ static void tegra_uart_stop_tx(struct uart_port *u)
async_tx_ack(tup->tx_dma_desc);
xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
tup->tx_in_progress = 0;
- return;
}
static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
@@ -523,7 +519,6 @@ static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&tup->uport);
tegra_uart_start_next_tx(tup);
- return;
}
static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
@@ -545,8 +540,6 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
tty_insert_flip_char(tty, ch, flag);
} while (1);
-
- return;
}
static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
@@ -576,13 +569,30 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
}
+static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
+ unsigned int residue)
+{
+ struct tty_port *port = &tup->uport.state->port;
+ struct tty_struct *tty = tty_port_tty_get(port);
+ unsigned int count;
+
+ async_tx_ack(tup->rx_dma_desc);
+ count = tup->rx_bytes_requested - residue;
+
+ /* If we are here, DMA is stopped */
+ tegra_uart_copy_rx_to_tty(tup, port, count);
+
+ tegra_uart_handle_rx_pio(tup, port);
+ if (tty) {
+ tty_flip_buffer_push(port);
+ tty_kref_put(tty);
+ }
+}
+
static void tegra_uart_rx_dma_complete(void *args)
{
struct tegra_uart_port *tup = args;
struct uart_port *u = &tup->uport;
- unsigned int count = tup->rx_bytes_requested;
- struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
- struct tty_port *port = &u->state->port;
unsigned long flags;
struct dma_tx_state state;
enum dma_status status;
@@ -596,22 +606,11 @@ static void tegra_uart_rx_dma_complete(void *args)
goto done;
}
- async_tx_ack(tup->rx_dma_desc);
-
/* Deactivate flow control to stop sender */
if (tup->rts_active)
set_rts(tup, false);
- /* If we are here, DMA is stopped */
- tegra_uart_copy_rx_to_tty(tup, port, count);
-
- tegra_uart_handle_rx_pio(tup, port);
- if (tty) {
- spin_unlock_irqrestore(&u->lock, flags);
- tty_flip_buffer_push(port);
- spin_lock_irqsave(&u->lock, flags);
- tty_kref_put(tty);
- }
+ tegra_uart_rx_buffer_push(tup, 0);
tegra_uart_start_rx_dma(tup);
/* Activate flow control to start transfer */
@@ -622,34 +621,17 @@ done:
spin_unlock_irqrestore(&u->lock, flags);
}
-static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
- unsigned long *flags)
+static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
{
struct dma_tx_state state;
- struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
- struct tty_port *port = &tup->uport.state->port;
- struct uart_port *u = &tup->uport;
- unsigned int count;
/* Deactivate flow control to stop sender */
if (tup->rts_active)
set_rts(tup, false);
dmaengine_terminate_all(tup->rx_dma_chan);
- dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
- async_tx_ack(tup->rx_dma_desc);
- count = tup->rx_bytes_requested - state.residue;
-
- /* If we are here, DMA is stopped */
- tegra_uart_copy_rx_to_tty(tup, port, count);
-
- tegra_uart_handle_rx_pio(tup, port);
- if (tty) {
- spin_unlock_irqrestore(&u->lock, *flags);
- tty_flip_buffer_push(port);
- spin_lock_irqsave(&u->lock, *flags);
- tty_kref_put(tty);
- }
+ dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ tegra_uart_rx_buffer_push(tup, state.residue);
tegra_uart_start_rx_dma(tup);
if (tup->rts_active)
@@ -697,7 +679,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
/* Will start/stop_tx accordingly */
if (msr & UART_MSR_DCTS)
uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
- return;
}
static irqreturn_t tegra_uart_isr(int irq, void *data)
@@ -714,7 +695,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
iir = tegra_uart_read(tup, UART_IIR);
if (iir & UART_IIR_NO_INT) {
if (is_rx_int) {
- tegra_uart_handle_rx_dma(tup, &flags);
+ tegra_uart_handle_rx_dma(tup);
if (tup->rx_in_progress) {
ier = tup->ier_shadow;
ier |= (UART_IER_RLSI | UART_IER_RTOIE |
@@ -769,11 +750,8 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
static void tegra_uart_stop_rx(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
- struct tty_struct *tty;
- struct tty_port *port = &u->state->port;
struct dma_tx_state state;
unsigned long ier;
- int count;
if (tup->rts_active)
set_rts(tup, false);
@@ -781,8 +759,6 @@ static void tegra_uart_stop_rx(struct uart_port *u)
if (!tup->rx_in_progress)
return;
- tty = tty_port_tty_get(&tup->uport.state->port);
-
tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */
ier = tup->ier_shadow;
@@ -791,21 +767,9 @@ static void tegra_uart_stop_rx(struct uart_port *u)
tup->ier_shadow = ier;
tegra_uart_write(tup, ier, UART_IER);
tup->rx_in_progress = 0;
- if (tup->rx_dma_chan) {
- dmaengine_terminate_all(tup->rx_dma_chan);
- dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
- async_tx_ack(tup->rx_dma_desc);
- count = tup->rx_bytes_requested - state.residue;
- tegra_uart_copy_rx_to_tty(tup, port, count);
- tegra_uart_handle_rx_pio(tup, port);
- } else {
- tegra_uart_handle_rx_pio(tup, port);
- }
- if (tty) {
- tty_flip_buffer_push(port);
- tty_kref_put(tty);
- }
- return;
+ dmaengine_terminate_all(tup->rx_dma_chan);
+ dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ tegra_uart_rx_buffer_push(tup, state.residue);
}
static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
@@ -1083,7 +1047,6 @@ static void tegra_uart_flush_buffer(struct uart_port *u)
tup->tx_bytes = 0;
if (tup->tx_dma_chan)
dmaengine_terminate_all(tup->tx_dma_chan);
- return;
}
static void tegra_uart_shutdown(struct uart_port *u)
@@ -1223,7 +1186,6 @@ static void tegra_uart_set_termios(struct uart_port *u,
tegra_uart_read(tup, UART_IER);
spin_unlock_irqrestore(&u->lock, flags);
- return;
}
static const char *tegra_uart_type(struct uart_port *u)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 603d2cc..def5199 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1437,7 +1437,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
clear_bit(ASYNCB_CLOSING, &port->flags);
spin_unlock_irq(&port->lock);
wake_up_interruptible(&port->open_wait);
- wake_up_interruptible(&port->close_wait);
mutex_unlock(&port->mutex);
@@ -1819,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
* @options: ptr for <options> field; NULL if not present (out)
*
* Decodes earlycon kernel command line parameters of the form
- * earlycon=<name>,io|mmio|mmio32|mmio32be,<addr>,<options>
- * console=<name>,io|mmio|mmio32|mmio32be,<addr>,<options>
+ * earlycon=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options>
+ * console=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options>
*
* The optional form
* earlycon=<name>,0x<addr>,<options>
@@ -1841,6 +1840,10 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
} else if (strncmp(p, "mmio32be,", 9) == 0) {
*iotype = UPIO_MEM32BE;
p += 9;
+ } else if (strncmp(p, "mmio32native,", 13) == 0) {
+ *iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+ UPIO_MEM32BE : UPIO_MEM32;
+ p += 13;
} else if (strncmp(p, "io,", 3) == 0) {
*iotype = UPIO_PORT;
p += 3;
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index 402f7fb..3eb57eb 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -12,18 +12,23 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
*/
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/irq.h>
#include <linux/gpio/consumer.h>
#include <linux/termios.h>
+#include <linux/serial_core.h>
#include "serial_mctrl_gpio.h"
struct mctrl_gpios {
+ struct uart_port *port;
struct gpio_desc *gpio[UART_GPIO_MAX];
+ int irq[UART_GPIO_MAX];
+ unsigned int mctrl_prev;
+ bool mctrl_on;
};
static const struct {
@@ -82,7 +87,7 @@ unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
}
EXPORT_SYMBOL_GPL(mctrl_gpio_get);
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
{
struct mctrl_gpios *gpios;
enum mctrl_gpio_idx i;
@@ -110,15 +115,135 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
return gpios;
}
-EXPORT_SYMBOL_GPL(mctrl_gpio_init);
+EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto);
+
+#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
+static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context)
+{
+ struct mctrl_gpios *gpios = context;
+ struct uart_port *port = gpios->port;
+ u32 mctrl = gpios->mctrl_prev;
+ u32 mctrl_diff;
+
+ mctrl_gpio_get(gpios, &mctrl);
+
+ mctrl_diff = mctrl ^ gpios->mctrl_prev;
+ gpios->mctrl_prev = mctrl;
+
+ if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) {
+ if ((mctrl_diff & mctrl) & TIOCM_RI)
+ port->icount.rng++;
+
+ if ((mctrl_diff & mctrl) & TIOCM_DSR)
+ port->icount.dsr++;
+
+ if (mctrl_diff & TIOCM_CD)
+ uart_handle_dcd_change(port, mctrl & TIOCM_CD);
+
+ if (mctrl_diff & TIOCM_CTS)
+ uart_handle_cts_change(port, mctrl & TIOCM_CTS);
+
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+ }
+
+ return IRQ_HANDLED;
+}
+
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
+{
+ struct mctrl_gpios *gpios;
+ enum mctrl_gpio_idx i;
+
+ gpios = mctrl_gpio_init_noauto(port->dev, idx);
+ if (IS_ERR(gpios))
+ return gpios;
+
+ gpios->port = port;
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ int ret;
+
+ if (!gpios->gpio[i] || mctrl_gpios_desc[i].dir_out)
+ continue;
+
+ ret = gpiod_to_irq(gpios->gpio[i]);
+ if (ret <= 0) {
+ dev_err(port->dev,
+ "failed to find corresponding irq for %s (idx=%d, err=%d)\n",
+ mctrl_gpios_desc[i].name, idx, ret);
+ return ERR_PTR(ret);
+ }
+ gpios->irq[i] = ret;
+
+ /* irqs should only be enabled in .enable_ms */
+ irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN);
+
+ ret = devm_request_irq(port->dev, gpios->irq[i],
+ mctrl_gpio_irq_handle,
+ IRQ_TYPE_EDGE_BOTH, dev_name(port->dev),
+ gpios);
+ if (ret) {
+ /* alternatively implement polling */
+ dev_err(port->dev,
+ "failed to request irq for %s (idx=%d, err=%d)\n",
+ mctrl_gpios_desc[i].name, idx, ret);
+ return ERR_PTR(ret);
+ }
+ }
+
+ return gpios;
+}
void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
{
enum mctrl_gpio_idx i;
- for (i = 0; i < UART_GPIO_MAX; i++)
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ if (gpios->irq[i])
+ devm_free_irq(gpios->port->dev, gpios->irq[i], gpios);
+
if (gpios->gpio[i])
devm_gpiod_put(dev, gpios->gpio[i]);
+ }
devm_kfree(dev, gpios);
}
EXPORT_SYMBOL_GPL(mctrl_gpio_free);
+
+void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ /* .enable_ms may be called multiple times */
+ if (gpios->mctrl_on)
+ return;
+
+ gpios->mctrl_on = true;
+
+ /* get initial status of modem lines GPIOs */
+ mctrl_gpio_get(gpios, &gpios->mctrl_prev);
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ if (!gpios->irq[i])
+ continue;
+
+ enable_irq(gpios->irq[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms);
+
+void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ if (!gpios->mctrl_on)
+ return;
+
+ gpios->mctrl_on = false;
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ if (!gpios->irq[i])
+ continue;
+
+ disable_irq(gpios->irq[i]);
+ }
+}
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
index 400ba04..9716db2 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.h
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -22,6 +22,8 @@
#include <linux/device.h>
#include <linux/gpio/consumer.h>
+struct uart_port;
+
enum mctrl_gpio_idx {
UART_GPIO_CTS,
UART_GPIO_DSR,
@@ -60,12 +62,22 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
enum mctrl_gpio_idx gidx);
/*
+ * Request and set direction of modem control lines GPIOs and sets up irq
+ * handling.
+ * devm_* functions are used, so there's no need to call mctrl_gpio_free().
+ * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
+ * allocation error.
+ */
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx);
+
+/*
* Request and set direction of modem control lines GPIOs.
* devm_* functions are used, so there's no need to call mctrl_gpio_free().
* Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
* allocation error.
*/
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev,
+ unsigned int idx);
/*
* Free the mctrl_gpios structure.
@@ -74,6 +86,16 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
*/
void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios);
+/*
+ * Enable gpio interrupts to report status line changes.
+ */
+void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios);
+
+/*
+ * Disable gpio interrupts to report status line changes.
+ */
+void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios);
+
#else /* GPIOLIB */
static inline
@@ -95,7 +117,13 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
}
static inline
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
{
return ERR_PTR(-ENOSYS);
}
@@ -105,6 +133,14 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
{
}
+static inline void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
+{
+}
+
+static inline void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios)
+{
+}
+
#endif /* GPIOLIB */
#endif
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1b2f894..960e50a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -84,6 +84,7 @@ struct sci_port {
unsigned int overrun_reg;
unsigned int overrun_mask;
unsigned int error_mask;
+ unsigned int error_clear;
unsigned int sampling_rate;
resource_size_t reg_size;
@@ -103,19 +104,15 @@ struct sci_port {
struct dma_chan *chan_rx;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- struct dma_async_tx_descriptor *desc_tx;
- struct dma_async_tx_descriptor *desc_rx[2];
dma_cookie_t cookie_tx;
dma_cookie_t cookie_rx[2];
dma_cookie_t active_rx;
- struct scatterlist sg_tx;
- unsigned int sg_len_tx;
+ dma_addr_t tx_dma_addr;
+ unsigned int tx_dma_len;
struct scatterlist sg_rx[2];
+ void *rx_buf[2];
size_t buf_len_rx;
- struct sh_dmae_slave param_tx;
- struct sh_dmae_slave param_rx;
struct work_struct work_tx;
- struct work_struct work_rx;
struct timer_list rx_timer;
unsigned int rx_timeout;
#endif
@@ -123,11 +120,6 @@ struct sci_port {
struct notifier_block freq_transition;
};
-/* Function prototypes */
-static void sci_start_tx(struct uart_port *port);
-static void sci_stop_tx(struct uart_port *port);
-static void sci_start_rx(struct uart_port *port);
-
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
@@ -146,7 +138,7 @@ struct plat_sci_reg {
/* Helper for invalidating specific entries of an inherited map. */
#define sci_reg_invalid { .offset = 0, .size = 0 }
-static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
+static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCIx_PROBE_REGTYPE] = {
[0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
},
@@ -399,7 +391,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
*/
static unsigned int sci_serial_in(struct uart_port *p, int offset)
{
- struct plat_sci_reg *reg = sci_getreg(p, offset);
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
return ioread8(p->membase + (reg->offset << p->regshift));
@@ -413,7 +405,7 @@ static unsigned int sci_serial_in(struct uart_port *p, int offset)
static void sci_serial_out(struct uart_port *p, int offset, int value)
{
- struct plat_sci_reg *reg = sci_getreg(p, offset);
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
iowrite8(value, p->membase + (reg->offset << p->regshift));
@@ -489,6 +481,105 @@ static void sci_port_disable(struct sci_port *sci_port)
pm_runtime_put_sync(sci_port->port.dev);
}
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+}
+
+static void sci_start_tx(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned short ctrl;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 new, scr = serial_port_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | SCSCR_TDRQE;
+ else
+ new = scr & ~SCSCR_TDRQE;
+ if (new != scr)
+ serial_port_out(port, SCSCR, new);
+ }
+
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ dma_submit_error(s->cookie_tx)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ }
+#endif
+
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ }
+}
+
+static void sci_stop_tx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_TDRQE;
+
+ ctrl &= ~SCSCR_TIE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_start_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ ctrl &= ~port_rx_irq_mask(port);
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+ if (port->type == PORT_SCI) {
+ /* Just store the mask */
+ serial_port_out(port, SCxSR, mask);
+ } else if (to_sci_port(port)->overrun_mask == SCIFA_ORER) {
+ /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */
+ /* Only clear the status bits we want to clear */
+ serial_port_out(port, SCxSR,
+ serial_port_in(port, SCxSR) & mask);
+ } else {
+ /* Store the mask, clear parity/framing errors */
+ serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC));
+ }
+}
+
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#ifdef CONFIG_CONSOLE_POLL
@@ -500,7 +591,7 @@ static int sci_poll_get_char(struct uart_port *port)
do {
status = serial_port_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
- serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
continue;
}
break;
@@ -513,7 +604,7 @@ static int sci_poll_get_char(struct uart_port *port)
/* Dummy read */
serial_port_in(port, SCxSR);
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
return c;
}
@@ -528,14 +619,14 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
} while (!(status & SCxSR_TDxE(port)));
serial_port_out(port, SCxTDR, c);
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
/*
* Use port-specific handler if provided.
@@ -565,7 +656,7 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
static int sci_txfill(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
reg = sci_getreg(port, SCTFDR);
if (reg->size)
@@ -585,7 +676,7 @@ static int sci_txroom(struct uart_port *port)
static int sci_rxfill(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
reg = sci_getreg(port, SCRFDR);
if (reg->size)
@@ -655,7 +746,7 @@ static void sci_transmit_chars(struct uart_port *port)
port->icount.tx++;
} while (--count > 0);
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
@@ -666,7 +757,7 @@ static void sci_transmit_chars(struct uart_port *port)
if (port->type != PORT_SCI) {
serial_port_in(port, SCxSR); /* Dummy read */
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
}
ctrl |= SCSCR_TIE;
@@ -750,7 +841,7 @@ static void sci_receive_chars(struct uart_port *port)
}
serial_port_in(port, SCxSR); /* dummy read */
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
copied += count;
port->icount.rx += count;
@@ -761,7 +852,7 @@ static void sci_receive_chars(struct uart_port *port)
tty_flip_buffer_push(tport);
} else {
serial_port_in(port, SCxSR); /* dummy read */
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
}
@@ -866,7 +957,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
int copied = 0;
u16 status;
@@ -924,6 +1015,460 @@ static int sci_handle_breaks(struct uart_port *port)
return copied;
}
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ xmit->tail += s->tx_dma_len;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += s->tx_dma_len;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
+{
+ struct uart_port *port = &s->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
+
+ copied = tty_insert_flip_string(tport, buf, count);
+ if (copied < count) {
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
+ count - copied);
+ port->icount.buf_overrun++;
+ }
+
+ port->icount.rx += copied;
+
+ return copied;
+}
+
+static int sci_dma_rx_find_active(struct sci_port *s)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ if (s->active_rx == s->cookie_rx[i])
+ return i;
+
+ dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
+ s->active_rx);
+ return -1;
+}
+
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_rx = NULL;
+ s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
+ sg_dma_address(&s->sg_rx[0]));
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_rx(port);
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
+ int active, count = 0;
+
+ dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line,
+ s->active_rx);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ active = sci_dma_rx_find_active(s);
+ if (active >= 0)
+ count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
+
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+
+ desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[active] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[active]))
+ goto fail;
+
+ s->active_rx = s->cookie_rx[!active];
+
+ dma_async_issue_pending(chan);
+
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
+ __func__, s->cookie_rx[active], active, s->active_rx);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+
+fail:
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+ sci_rx_dma_release(s, true);
+}
+
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_tx = NULL;
+ s->cookie_tx = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_tx(port);
+}
+
+static void sci_submit_rx(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_rx;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+ struct dma_async_tx_descriptor *desc;
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[i] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[i]))
+ goto fail;
+
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
+ s->cookie_rx[i], i);
+ }
+
+ s->active_rx = s->cookie_rx[0];
+
+ dma_async_issue_pending(chan);
+ return;
+
+fail:
+ if (i)
+ dmaengine_terminate_all(chan);
+ for (i = 0; i < 2; i++)
+ s->cookie_rx[i] = -EINVAL;
+ s->active_rx = -EINVAL;
+ dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
+ sci_rx_dma_release(s, true);
+}
+
+static void work_fn_tx(struct work_struct *work)
+{
+ struct sci_port *s = container_of(work, struct sci_port, work_tx);
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ dma_addr_t buf;
+
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped, and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer, we have to
+ * transmit till the end, and then the rest. Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ spin_lock_irq(&port->lock);
+ buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+ s->tx_dma_len = min_t(unsigned int,
+ CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+ CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+ spin_unlock_irq(&port->lock);
+
+ desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
+ DMA_TO_DEVICE);
+
+ spin_lock_irq(&port->lock);
+ desc->callback = sci_dma_tx_complete;
+ desc->callback_param = s;
+ spin_unlock_irq(&port->lock);
+ s->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_tx)) {
+ dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+
+ dma_async_issue_pending(chan);
+}
+
+static void rx_timer_fn(unsigned long arg)
+{
+ struct sci_port *s = (struct sci_port *)arg;
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ unsigned int read;
+ int active, count;
+ u16 scr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ dev_dbg(port->dev, "DMA Rx timed out\n");
+
+ active = sci_dma_rx_find_active(s);
+ if (active < 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+ }
+
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ dev_dbg(port->dev, "Cookie %d #%d has already completed\n",
+ s->active_rx, active);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Let packet complete handler take care of the packet */
+ return;
+ }
+
+ dmaengine_pause(chan);
+
+ /*
+ * sometimes DMA transfer doesn't stop even if it is stopped and
+ * data keeps on coming until transaction is complete so check
+ * for DMA_COMPLETE again
+ * Let packet complete handler take care of the packet
+ */
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_dbg(port->dev, "Transaction complete after DMA engine was stopped");
+ return;
+ }
+
+ /* Handle incomplete DMA receive */
+ dmaengine_terminate_all(s->chan_rx);
+ read = sg_dma_len(&s->sg_rx[active]) - state.residue;
+ dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
+ s->active_rx);
+
+ if (read) {
+ count = sci_dma_rx_push(s, s->rx_buf[active], read);
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+ }
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_submit_rx(s);
+
+ /* Direct new serial port interrupts back to CPU */
+ scr = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
+ enum dma_transfer_direction dir,
+ unsigned int id)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ int ret;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
+ (void *)(unsigned long)id, port->dev,
+ dir == DMA_MEM_TO_DEV ? "tx" : "rx");
+ if (!chan) {
+ dev_warn(port->dev,
+ "dma_request_slave_channel_compat failed\n");
+ return NULL;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = port->mapbase +
+ (sci_getreg(port, SCxTDR)->offset << port->regshift);
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ } else {
+ cfg.src_addr = port->mapbase +
+ (sci_getreg(port, SCxRDR)->offset << port->regshift);
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(port->dev, "dmaengine_slave_config failed %d\n", ret);
+ dma_release_channel(chan);
+ return NULL;
+ }
+
+ return chan;
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct dma_chan *chan;
+
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
+
+ if (!port->dev->of_node &&
+ (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0))
+ return;
+
+ s->cookie_tx = -EINVAL;
+ chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV, s->cfg->dma_slave_tx);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ if (chan) {
+ s->chan_tx = chan;
+ /* UART circular tx buffer is an aligned page. */
+ s->tx_dma_addr = dma_map_single(chan->device->dev,
+ port->state->xmit.buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
+ dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
+ dma_release_channel(chan);
+ s->chan_tx = NULL;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
+ __func__, UART_XMIT_SIZE,
+ port->state->xmit.buf, &s->tx_dma_addr);
+ }
+
+ INIT_WORK(&s->work_tx, work_fn_tx);
+ }
+
+ chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM, s->cfg->dma_slave_rx);
+ dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+ if (chan) {
+ unsigned int i;
+ dma_addr_t dma;
+ void *buf;
+
+ s->chan_rx = chan;
+
+ s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
+ buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
+ &dma, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(port->dev,
+ "Failed to allocate Rx dma buffer, using PIO\n");
+ dma_release_channel(chan);
+ s->chan_rx = NULL;
+ return;
+ }
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+
+ sg_init_table(sg, 1);
+ s->rx_buf[i] = buf;
+ sg_dma_address(sg) = dma;
+ sg->length = s->buf_len_rx;
+
+ buf += s->buf_len_rx;
+ dma += s->buf_len_rx;
+ }
+
+ setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_submit_rx(s);
+ }
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->chan_tx)
+ sci_tx_dma_release(s, false);
+ if (s->chan_rx)
+ sci_rx_dma_release(s, false);
+}
+#else
+static inline void sci_request_dma(struct uart_port *port)
+{
+}
+
+static inline void sci_free_dma(struct uart_port *port)
+{
+}
+#endif
+
static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
{
#ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -940,10 +1485,12 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
scr |= SCSCR_RDRQE;
} else {
scr &= ~SCSCR_RIE;
+ sci_submit_rx(s);
}
serial_port_out(port, SCSCR, scr);
/* Clear current interrupt */
- serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+ serial_port_out(port, SCxSR,
+ ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
jiffies, s->rx_timeout);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
@@ -976,23 +1523,26 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
serial_port_in(port, SCxSR);
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
} else {
sci_handle_fifo_overrun(port);
- sci_rx_interrupt(irq, ptr);
+ if (!s->chan_rx)
+ sci_receive_chars(ptr);
}
- serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
/* Kick the transmission */
- sci_tx_interrupt(irq, ptr);
+ if (!s->chan_tx)
+ sci_tx_interrupt(irq, ptr);
return IRQ_HANDLED;
}
@@ -1003,23 +1553,11 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
/* Handle BREAKs */
sci_handle_breaks(port);
- serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
}
-static inline unsigned long port_rx_irq_mask(struct uart_port *port)
-{
- /*
- * Not all ports (such as SCIFA) will support REIE. Rather than
- * special-casing the port type, we check the port initialization
- * IRQ enable mask to see whether the IRQ is desired at all. If
- * it's unset, it's logically inferred that there's no point in
- * testing for it.
- */
- return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
-}
-
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
@@ -1048,11 +1586,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE)) {
- if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
- sci_handle_fifo_overrun(port);
+ (scr_status & SCSCR_RIE))
ret = sci_rx_interrupt(irq, ptr);
- }
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -1063,8 +1598,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
ret = sci_br_interrupt(irq, ptr);
/* Overrun Interrupt */
- if (orer_status & s->overrun_mask)
+ if (orer_status & s->overrun_mask) {
sci_handle_fifo_overrun(port);
+ ret = IRQ_HANDLED;
+ }
return ret;
}
@@ -1092,7 +1629,7 @@ static int sci_notifier(struct notifier_block *self,
return NOTIFY_OK;
}
-static struct sci_irq_desc {
+static const struct sci_irq_desc {
const char *desc;
irq_handler_t handler;
} sci_irq_desc[] = {
@@ -1134,7 +1671,7 @@ static int sci_request_irq(struct sci_port *port)
int i, j, ret = 0;
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
- struct sci_irq_desc *desc;
+ const struct sci_irq_desc *desc;
int irq;
if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1154,11 +1691,8 @@ static int sci_request_irq(struct sci_port *port)
desc = sci_irq_desc + i;
port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
dev_name(up->dev), desc->desc);
- if (!port->irqstr[j]) {
- dev_err(up->dev, "Failed to allocate %s IRQ string\n",
- desc->desc);
+ if (!port->irqstr[j])
goto out_nomem;
- }
ret = request_irq(irq, desc->handler, up->irqflags,
port->irqstr[j], port);
@@ -1232,7 +1766,7 @@ static unsigned int sci_tx_empty(struct uart_port *port)
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
if (mctrl & TIOCM_LOOP) {
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
/*
* Standard loopback mode for SCFCR ports.
@@ -1254,356 +1788,10 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
return TIOCM_DSR | TIOCM_CAR;
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static void sci_dma_tx_complete(void *arg)
-{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long flags;
-
- dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
-
- spin_lock_irqsave(&port->lock, flags);
-
- xmit->tail += sg_dma_len(&s->sg_tx);
- xmit->tail &= UART_XMIT_SIZE - 1;
-
- port->icount.tx += sg_dma_len(&s->sg_tx);
-
- async_tx_ack(s->desc_tx);
- s->desc_tx = NULL;
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (!uart_circ_empty(xmit)) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- } else {
- s->cookie_tx = -EINVAL;
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
- }
- }
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/* Locking: called with port lock held */
-static int sci_dma_rx_push(struct sci_port *s, size_t count)
-{
- struct uart_port *port = &s->port;
- struct tty_port *tport = &port->state->port;
- int i, active, room;
-
- room = tty_buffer_request_room(tport, count);
-
- if (s->active_rx == s->cookie_rx[0]) {
- active = 0;
- } else if (s->active_rx == s->cookie_rx[1]) {
- active = 1;
- } else {
- dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
- return 0;
- }
-
- if (room < count)
- dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
- count - room);
- if (!room)
- return room;
-
- for (i = 0; i < room; i++)
- tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
- TTY_NORMAL);
-
- port->icount.rx += room;
-
- return room;
-}
-
-static void sci_dma_rx_complete(void *arg)
-{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- unsigned long flags;
- int count;
-
- dev_dbg(port->dev, "%s(%d) active #%d\n",
- __func__, port->line, s->active_rx);
-
- spin_lock_irqsave(&port->lock, flags);
-
- count = sci_dma_rx_push(s, s->buf_len_rx);
-
- mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
-
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (count)
- tty_flip_buffer_push(&port->state->port);
-
- schedule_work(&s->work_rx);
-}
-
-static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
-{
- struct dma_chan *chan = s->chan_rx;
- struct uart_port *port = &s->port;
-
- s->chan_rx = NULL;
- s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
- dma_release_channel(chan);
- if (sg_dma_address(&s->sg_rx[0]))
- dma_free_coherent(port->dev, s->buf_len_rx * 2,
- sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
- if (enable_pio)
- sci_start_rx(port);
-}
-
-static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
-{
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
-
- s->chan_tx = NULL;
- s->cookie_tx = -EINVAL;
- dma_release_channel(chan);
- if (enable_pio)
- sci_start_tx(port);
-}
-
-static void sci_submit_rx(struct sci_port *s)
-{
- struct dma_chan *chan = s->chan_rx;
- int i;
-
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
- struct dma_async_tx_descriptor *desc;
-
- desc = dmaengine_prep_slave_sg(chan,
- sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
-
- if (desc) {
- s->desc_rx[i] = desc;
- desc->callback = sci_dma_rx_complete;
- desc->callback_param = s;
- s->cookie_rx[i] = desc->tx_submit(desc);
- }
-
- if (!desc || s->cookie_rx[i] < 0) {
- if (i) {
- async_tx_ack(s->desc_rx[0]);
- s->cookie_rx[0] = -EINVAL;
- }
- if (desc) {
- async_tx_ack(desc);
- s->cookie_rx[i] = -EINVAL;
- }
- dev_warn(s->port.dev,
- "failed to re-start DMA, using PIO\n");
- sci_rx_dma_release(s, true);
- return;
- }
- dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
- __func__, s->cookie_rx[i], i);
- }
-
- s->active_rx = s->cookie_rx[0];
-
- dma_async_issue_pending(chan);
-}
-
-static void work_fn_rx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_rx);
- struct uart_port *port = &s->port;
- struct dma_async_tx_descriptor *desc;
- int new;
-
- if (s->active_rx == s->cookie_rx[0]) {
- new = 0;
- } else if (s->active_rx == s->cookie_rx[1]) {
- new = 1;
- } else {
- dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
- return;
- }
- desc = s->desc_rx[new];
-
- if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
- DMA_COMPLETE) {
- /* Handle incomplete DMA receive */
- struct dma_chan *chan = s->chan_rx;
- struct shdma_desc *sh_desc = container_of(desc,
- struct shdma_desc, async_tx);
- unsigned long flags;
- int count;
-
- dmaengine_terminate_all(chan);
- dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
- sh_desc->partial, sh_desc->cookie);
-
- spin_lock_irqsave(&port->lock, flags);
- count = sci_dma_rx_push(s, sh_desc->partial);
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (count)
- tty_flip_buffer_push(&port->state->port);
-
- sci_submit_rx(s);
-
- return;
- }
-
- s->cookie_rx[new] = desc->tx_submit(desc);
- if (s->cookie_rx[new] < 0) {
- dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
- sci_rx_dma_release(s, true);
- return;
- }
-
- s->active_rx = s->cookie_rx[!new];
-
- dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
- __func__, s->cookie_rx[new], new, s->active_rx);
-}
-
-static void work_fn_tx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_tx);
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- struct scatterlist *sg = &s->sg_tx;
-
- /*
- * DMA is idle now.
- * Port xmit buffer is already mapped, and it is one page... Just adjust
- * offsets and lengths. Since it is a circular buffer, we have to
- * transmit till the end, and then the rest. Take the port lock to get a
- * consistent xmit buffer state.
- */
- spin_lock_irq(&port->lock);
- sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
- sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
- sg->offset;
- sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
- CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
- spin_unlock_irq(&port->lock);
-
- BUG_ON(!sg_dma_len(sg));
-
- desc = dmaengine_prep_slave_sg(chan,
- sg, s->sg_len_tx, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
- }
-
- dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
- spin_lock_irq(&port->lock);
- s->desc_tx = desc;
- desc->callback = sci_dma_tx_complete;
- desc->callback_param = s;
- spin_unlock_irq(&port->lock);
- s->cookie_tx = desc->tx_submit(desc);
- if (s->cookie_tx < 0) {
- dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
- }
-
- dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
- __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
-
- dma_async_issue_pending(chan);
-}
-#endif
-
-static void sci_start_tx(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- unsigned short ctrl;
-
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 new, scr = serial_port_in(port, SCSCR);
- if (s->chan_tx)
- new = scr | SCSCR_TDRQE;
- else
- new = scr & ~SCSCR_TDRQE;
- if (new != scr)
- serial_port_out(port, SCSCR, new);
- }
-
- if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
- s->cookie_tx < 0) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- }
-#endif
-
- if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
- }
-}
-
-static void sci_stop_tx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_TDRQE;
-
- ctrl &= ~SCSCR_TIE;
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
-static void sci_start_rx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
-static void sci_stop_rx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
-
- ctrl &= ~port_rx_irq_mask(port);
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
static void sci_break_ctl(struct uart_port *port, int break_state)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
unsigned short scscr, scsptr;
/* check wheter the port has SCSPTR */
@@ -1630,142 +1818,6 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
serial_port_out(port, SCSCR, scscr);
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static bool filter(struct dma_chan *chan, void *slave)
-{
- struct sh_dmae_slave *param = slave;
-
- dev_dbg(chan->device->dev, "%s: slave ID %d\n",
- __func__, param->shdma_slave.slave_id);
-
- chan->private = &param->shdma_slave;
- return true;
-}
-
-static void rx_timer_fn(unsigned long arg)
-{
- struct sci_port *s = (struct sci_port *)arg;
- struct uart_port *port = &s->port;
- u16 scr = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- scr &= ~SCSCR_RDRQE;
- enable_irq(s->irqs[SCIx_RXI_IRQ]);
- }
- serial_port_out(port, SCSCR, scr | SCSCR_RIE);
- dev_dbg(port->dev, "DMA Rx timed out\n");
- schedule_work(&s->work_rx);
-}
-
-static void sci_request_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- struct sh_dmae_slave *param;
- struct dma_chan *chan;
- dma_cap_mask_t mask;
- int nent;
-
- dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
-
- if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
- return;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- param = &s->param_tx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
-
- s->cookie_tx = -EINVAL;
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
- if (chan) {
- s->chan_tx = chan;
- sg_init_table(&s->sg_tx, 1);
- /* UART circular tx buffer is an aligned page. */
- BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
- sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
- UART_XMIT_SIZE,
- (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
- nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
- if (!nent)
- sci_tx_dma_release(s, false);
- else
- dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
- __func__,
- sg_dma_len(&s->sg_tx), port->state->xmit.buf,
- &sg_dma_address(&s->sg_tx));
-
- s->sg_len_tx = nent;
-
- INIT_WORK(&s->work_tx, work_fn_tx);
- }
-
- param = &s->param_rx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
-
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
- if (chan) {
- dma_addr_t dma[2];
- void *buf[2];
- int i;
-
- s->chan_rx = chan;
-
- s->buf_len_rx = 2 * max(16, (int)port->fifosize);
- buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
- &dma[0], GFP_KERNEL);
-
- if (!buf[0]) {
- dev_warn(port->dev,
- "failed to allocate dma buffer, using PIO\n");
- sci_rx_dma_release(s, true);
- return;
- }
-
- buf[1] = buf[0] + s->buf_len_rx;
- dma[1] = dma[0] + s->buf_len_rx;
-
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
-
- sg_init_table(sg, 1);
- sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
- (uintptr_t)buf[i] & ~PAGE_MASK);
- sg_dma_address(sg) = dma[i];
- }
-
- INIT_WORK(&s->work_rx, work_fn_rx);
- setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
-
- sci_submit_rx(s);
- }
-}
-
-static void sci_free_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
-
- if (s->chan_tx)
- sci_tx_dma_release(s, false);
- if (s->chan_rx)
- sci_rx_dma_release(s, false);
-}
-#else
-static inline void sci_request_dma(struct uart_port *port)
-{
-}
-
-static inline void sci_free_dma(struct uart_port *port)
-{
-}
-#endif
-
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
@@ -1800,6 +1852,14 @@ static void sci_shutdown(struct uart_port *port)
sci_stop_tx(port);
spin_unlock_irqrestore(&port->lock, flags);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (s->chan_rx) {
+ dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__,
+ port->line);
+ del_timer_sync(&s->rx_timer);
+ }
+#endif
+
sci_free_dma(port);
sci_free_irq(s);
}
@@ -1892,7 +1952,7 @@ static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
static void sci_reset(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
unsigned int status;
do {
@@ -1910,7 +1970,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
unsigned int baud, smr_val = 0, max_baud, cks = 0;
int t = -1;
unsigned int srr = 15;
@@ -1951,7 +2011,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_reset(port);
- smr_val |= serial_port_in(port, SCSMR) & 3;
+ smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS;
uart_update_timeout(port, termios->c_cflag, baud);
@@ -1996,13 +2056,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
* Calculate delay for 2 DMA buffers (4 FIFO).
- * See drivers/serial/serial_core.c::uart_update_timeout(). With 10
- * bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
- * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
- * Then below we calculate 5 jiffies (20ms) for 2 DMA buffers (4 FIFO
- * sizes), but when performing a faster transfer, value obtained by
- * this formula is may not enough. Therefore, if value is smaller than
- * 20msec, this sets 20msec as timeout of DMA.
+ * See serial_core.c::uart_update_timeout().
+ * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above
+ * function calculates 1 jiffie for the data plus 5 jiffies for the
+ * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA
+ * buffers (4 FIFO sizes), but when performing a faster transfer, the
+ * value obtained by this formula is too small. Therefore, if the value
+ * is smaller than 20ms, use 20ms as the timeout value for DMA.
*/
if (s->chan_rx) {
unsigned int bits;
@@ -2187,7 +2247,6 @@ static int sci_init_single(struct platform_device *dev,
{
struct uart_port *port = &sci_port->port;
const struct resource *res;
- unsigned int sampling_rate;
unsigned int i;
int ret;
@@ -2232,37 +2291,37 @@ static int sci_init_single(struct platform_device *dev,
port->fifosize = 256;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sampling_rate = 16;
+ sci_port->sampling_rate = 16;
break;
case PORT_HSCIF:
port->fifosize = 128;
- sampling_rate = 0;
sci_port->overrun_reg = SCLSR;
sci_port->overrun_mask = SCLSR_ORER;
+ sci_port->sampling_rate = 0;
break;
case PORT_SCIFA:
port->fifosize = 64;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sampling_rate = 16;
+ sci_port->sampling_rate = 16;
break;
case PORT_SCIF:
port->fifosize = 16;
if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sampling_rate = 16;
+ sci_port->sampling_rate = 16;
} else {
sci_port->overrun_reg = SCLSR;
sci_port->overrun_mask = SCLSR_ORER;
- sampling_rate = 32;
+ sci_port->sampling_rate = 32;
}
break;
default:
port->fifosize = 1;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCI_ORER;
- sampling_rate = 32;
+ sci_port->sampling_rate = 32;
break;
}
@@ -2270,8 +2329,8 @@ static int sci_init_single(struct platform_device *dev,
* match the SoC datasheet, this should be investigated. Let platform
* data override the sampling rate for now.
*/
- sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
- : sampling_rate;
+ if (p->sampling_rate)
+ sci_port->sampling_rate = p->sampling_rate;
if (!early) {
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
@@ -2303,15 +2362,22 @@ static int sci_init_single(struct platform_device *dev,
/*
* Establish some sensible defaults for the error detection.
*/
- sci_port->error_mask = (p->type == PORT_SCI) ?
- SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+ if (p->type == PORT_SCI) {
+ sci_port->error_mask = SCI_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCI_ERROR_CLEAR;
+ } else {
+ sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCIF_ERROR_CLEAR;
+ }
/*
* Make the error mask inclusive of overrun detection, if
* supported.
*/
- if (sci_port->overrun_reg == SCxSR)
+ if (sci_port->overrun_reg == SCxSR) {
sci_port->error_mask |= sci_port->overrun_mask;
+ sci_port->error_clear &= ~sci_port->overrun_mask;
+ }
port->type = p->type;
port->flags = UPF_FIXED_PORT | p->flags;
@@ -2564,10 +2630,8 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
info = match->data;
p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
- if (!p) {
- dev_err(&pdev->dev, "failed to allocate DT config data\n");
+ if (!p)
return NULL;
- }
/* Get the line number for the aliases node. */
id = of_alias_get_id(np, "serial");
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 3393f67..bf69bbd 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -54,10 +54,10 @@ enum {
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
-#define SCI_RDxF_CLEAR ~(SCI_RESERVED | SCI_RDRF)
-#define SCI_ERROR_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
-#define SCI_TDxE_CLEAR ~(SCI_RESERVED | SCI_TEND | SCI_TDRE)
-#define SCI_BREAK_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
+#define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF))
+#define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
+#define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE))
+#define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
#define SCIF_ER BIT(7) /* Receive Error */
@@ -76,10 +76,10 @@ enum {
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
-#define SCIF_RDxF_CLEAR ~(SCIF_DR | SCIF_RDF)
-#define SCIF_ERROR_CLEAR ~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER)
-#define SCIF_TDxE_CLEAR ~(SCIF_TDFE)
-#define SCIF_BREAK_CLEAR ~(SCIF_PER | SCIF_FER | SCIF_BRK)
+#define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF))
+#define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
+#define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE))
+#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
/* SCFCR (FIFO Control Register) */
#define SCFCR_MCE BIT(3) /* Modem Control Enable */
@@ -119,28 +119,11 @@ enum {
#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask)
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SH73A0) || \
- defined(CONFIG_ARCH_R8A7740)
-
-# define SCxSR_RDxF_CLEAR(port) \
- (serial_port_in(port, SCxSR) & SCIF_RDxF_CLEAR)
-# define SCxSR_ERROR_CLEAR(port) \
- (serial_port_in(port, SCxSR) & SCIF_ERROR_CLEAR)
-# define SCxSR_TDxE_CLEAR(port) \
- (serial_port_in(port, SCxSR) & SCIF_TDxE_CLEAR)
-# define SCxSR_BREAK_CLEAR(port) \
- (serial_port_in(port, SCxSR) & SCIF_BREAK_CLEAR)
-#else
-# define SCxSR_RDxF_CLEAR(port) \
- ((((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) & 0xff)
-# define SCxSR_ERROR_CLEAR(port) \
- ((((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR) & 0xff)
-# define SCxSR_TDxE_CLEAR(port) \
- ((((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) & 0xff)
-# define SCxSR_BREAK_CLEAR(port) \
- ((((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) & 0xff)
-#endif
-
+#define SCxSR_RDxF_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
+#define SCxSR_ERROR_CLEAR(port) \
+ (to_sci_port(port)->error_clear)
+#define SCxSR_TDxE_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
+#define SCxSR_BREAK_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 3866516..9dbae01 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -782,6 +782,7 @@ static const struct of_device_id serial_ids[] = {
{.compatible = "sprd,sc9836-uart",},
{}
};
+MODULE_DEVICE_TABLE(of, serial_ids);
static struct platform_driver sprd_platform_driver = {
.probe = sprd_probe,
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index d625664..2d78cb3 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -430,7 +430,7 @@ static void asc_break_ctl(struct uart_port *port, int break_state)
*/
static int asc_startup(struct uart_port *port)
{
- if (request_irq(port->irq, asc_interrupt, IRQF_NO_SUSPEND,
+ if (request_irq(port->irq, asc_interrupt, 0,
asc_port_name(port), port)) {
dev_err(port->dev, "cannot allocate irq.\n");
return -ENODEV;
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index e3de9c6..f89d1f7 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -322,8 +322,7 @@ static int stm32_startup(struct uart_port *port)
u32 val;
int ret;
- ret = request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND,
- name, port);
+ ret = request_irq(port->irq, stm32_interrupt, 0, name, port);
if (ret)
return ret;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 2fac712..6188059 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3314,12 +3314,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
-EAGAIN : -ERESTARTSYS;
break;
}
-
+
dcd = tty_port_carrier_raised(&info->port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
- break;
-
+ if (do_clocal || dcd)
+ break;
+
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
@@ -3398,15 +3397,6 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
@@ -6635,7 +6625,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
unsigned char *ptmp = info->intermediate_rxbuffer;
if ( !(status & RXSTATUS_CRC_ERROR))
- info->icount.rxok++;
+ info->icount.rxok++;
while(copy_count) {
int partial_count;
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 0ea8eee..6fc39fb 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -672,15 +672,6 @@ static int open(struct tty_struct *tty, struct file *filp)
DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
mutex_lock(&info->port.mutex);
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
@@ -3320,9 +3311,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
cd = tty_port_carrier_raised(port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
- break;
+ if (do_clocal || cd)
+ break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 08633a8..fb00a06 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -752,15 +752,6 @@ static int open(struct tty_struct *tty, struct file *filp)
printk("%s(%d):%s open(), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
@@ -3341,9 +3332,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
cd = tty_port_carrier_raised(port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
- break;
+ if (do_clocal || cd)
+ break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 95b330a..5381a72 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -1003,6 +1003,10 @@ static const struct kernel_param_ops param_ops_sysrq_reset_seq = {
#define param_check_sysrq_reset_seq(name, p) \
__param_check(name, p, unsigned short)
+/*
+ * not really modular, but the easiest way to keep compat with existing
+ * bootargs behaviour is to continue using module_param here.
+ */
module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq,
&sysrq_reset_seq_len, 0644);
@@ -1119,4 +1123,4 @@ static int __init sysrq_init(void)
return 0;
}
-module_init(sysrq_init);
+device_initcall(sysrq_init);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index a660ab1..9a479e6 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -403,7 +403,7 @@ void tty_schedule_flip(struct tty_port *port)
* flush_to_ldisc() sees buffer data.
*/
smp_store_release(&buf->tail->commit, buf->tail->used);
- schedule_work(&buf->work);
+ queue_work(system_unbound_wq, &buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -587,3 +587,13 @@ void tty_buffer_set_lock_subclass(struct tty_port *port)
{
lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE);
}
+
+bool tty_buffer_restart_work(struct tty_port *port)
+{
+ return queue_work(system_unbound_wq, &port->buf.work);
+}
+
+bool tty_buffer_cancel_work(struct tty_port *port)
+{
+ return cancel_work_sync(&port->buf.work);
+}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2eefaa6..0c41dbc 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -390,10 +390,10 @@ EXPORT_SYMBOL_GPL(tty_find_polling_driver);
* Locking: ctrl_lock
*/
-int tty_check_change(struct tty_struct *tty)
+int __tty_check_change(struct tty_struct *tty, int sig)
{
unsigned long flags;
- struct pid *pgrp;
+ struct pid *pgrp, *tty_pgrp;
int ret = 0;
if (current->signal->tty != tty)
@@ -403,33 +403,35 @@ int tty_check_change(struct tty_struct *tty)
pgrp = task_pgrp(current);
spin_lock_irqsave(&tty->ctrl_lock, flags);
-
- if (!tty->pgrp) {
- printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
- goto out_unlock;
- }
- if (pgrp == tty->pgrp)
- goto out_unlock;
+ tty_pgrp = tty->pgrp;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- if (is_ignored(SIGTTOU))
- goto out_rcuunlock;
- if (is_current_pgrp_orphaned()) {
- ret = -EIO;
- goto out_rcuunlock;
+ if (tty_pgrp && pgrp != tty->pgrp) {
+ if (is_ignored(sig)) {
+ if (sig == SIGTTIN)
+ ret = -EIO;
+ } else if (is_current_pgrp_orphaned())
+ ret = -EIO;
+ else {
+ kill_pgrp(pgrp, sig, 1);
+ set_thread_flag(TIF_SIGPENDING);
+ ret = -ERESTARTSYS;
+ }
}
- kill_pgrp(pgrp, SIGTTOU, 1);
- rcu_read_unlock();
- set_thread_flag(TIF_SIGPENDING);
- ret = -ERESTARTSYS;
- return ret;
-out_unlock:
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-out_rcuunlock:
rcu_read_unlock();
+
+ if (!tty_pgrp) {
+ pr_warn("%s: tty_check_change: sig=%d, tty->pgrp == NULL!\n",
+ tty_name(tty), sig);
+ }
+
return ret;
}
+int tty_check_change(struct tty_struct *tty)
+{
+ return __tty_check_change(tty, SIGTTOU);
+}
EXPORT_SYMBOL(tty_check_change);
static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
@@ -1198,11 +1200,9 @@ void tty_write_message(struct tty_struct *tty, char *msg)
if (tty) {
mutex_lock(&tty->atomic_write_lock);
tty_lock(tty);
- if (tty->ops->write && tty->count > 0) {
- tty_unlock(tty);
+ if (tty->ops->write && tty->count > 0)
tty->ops->write(tty, msg, strlen(msg));
- } else
- tty_unlock(tty);
+ tty_unlock(tty);
tty_write_unlock(tty);
}
return;
@@ -1689,7 +1689,7 @@ static void release_tty(struct tty_struct *tty, int idx)
tty->port->itty = NULL;
if (tty->link)
tty->link->port->itty = NULL;
- cancel_work_sync(&tty->port->buf.work);
+ tty_buffer_cancel_work(tty->port);
tty_kref_put(tty->link);
tty_kref_put(tty);
@@ -2569,7 +2569,6 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
struct pid *pgrp;
pid_t pgrp_nr;
int retval = tty_check_change(real_tty);
- unsigned long flags;
if (retval == -EIO)
return -ENOTTY;
@@ -2592,10 +2591,10 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
if (session_of_pgrp(pgrp) != task_session(current))
goto out_unlock;
retval = 0;
- spin_lock_irqsave(&tty->ctrl_lock, flags);
+ spin_lock_irq(&tty->ctrl_lock);
put_pid(real_tty->pgrp);
real_tty->pgrp = get_pid(pgrp);
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ spin_unlock_irq(&tty->ctrl_lock);
out_unlock:
rcu_read_unlock();
return retval;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 71750cb..5af8f18 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -319,7 +319,7 @@ __tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout)
static inline void __tty_ldisc_unlock(struct tty_struct *tty)
{
- return ldsem_up_write(&tty->ldisc_sem);
+ ldsem_up_write(&tty->ldisc_sem);
}
static int __lockfunc
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 40b3183..482f33f 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -22,7 +22,6 @@ void tty_port_init(struct tty_port *port)
memset(port, 0, sizeof(*port));
tty_buffer_init(port);
init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->delta_msr_wait);
mutex_init(&port->mutex);
mutex_init(&port->buf_mutex);
@@ -131,7 +130,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf);
*/
void tty_port_destroy(struct tty_port *port)
{
- cancel_work_sync(&port->buf.work);
+ tty_buffer_cancel_work(port);
tty_buffer_free_all(port);
}
EXPORT_SYMBOL(tty_port_destroy);
@@ -363,16 +362,6 @@ int tty_port_block_til_ready(struct tty_port *port,
unsigned long flags;
DEFINE_WAIT(wait);
- /* block if port is in the process of being closed */
- if (port->flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, port->close_wait,
- !(port->flags & ASYNC_CLOSING));
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
/* if non-blocking mode is set we can pass directly to open unless
the port has just hung up or is in another error state */
if (tty->flags & (1 << TTY_IO_ERROR)) {
@@ -423,8 +412,7 @@ int tty_port_block_til_ready(struct tty_port *port,
* Never ask drivers if CLOCAL is set, this causes troubles
* on some hardware.
*/
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || tty_port_carrier_raised(port)))
+ if (do_clocal || tty_port_carrier_raised(port))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -463,10 +451,7 @@ static void tty_port_drain_delay(struct tty_port *port, struct tty_struct *tty)
schedule_timeout_interruptible(timeout);
}
-/* Caller holds tty lock.
- * NB: may drop and reacquire tty lock (in tty_wait_until_sent_from_close())
- * so tty and tty port may have changed state (but not hung up or reopened).
- */
+/* Caller holds tty lock. */
int tty_port_close_start(struct tty_port *port,
struct tty_struct *tty, struct file *filp)
{
@@ -502,7 +487,7 @@ int tty_port_close_start(struct tty_port *port,
if (tty->flow_stopped)
tty_driver_flush_buffer(tty);
if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent_from_close(tty, port->closing_wait);
+ tty_wait_until_sent(tty, port->closing_wait);
if (port->drain_delay)
tty_port_drain_delay(port, tty);
}
@@ -534,7 +519,6 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
wake_up_interruptible(&port->open_wait);
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL(tty_port_close_end);
@@ -543,10 +527,6 @@ EXPORT_SYMBOL(tty_port_close_end);
* tty_port_close
*
* Caller holds tty lock
- *
- * NB: may drop and reacquire tty lock (in tty_port_close_start()->
- * tty_wait_until_sent_from_close()) so tty and tty_port may have changed
- * state (but not hung up or reopened).
*/
void tty_port_close(struct tty_port *port, struct tty_struct *tty,
struct file *filp)
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 9cc6a13..f7771d8 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -114,6 +114,7 @@ struct gs_port {
struct gs_buf port_write_buf;
wait_queue_head_t drain_wait; /* wait while writes drain */
bool write_busy;
+ wait_queue_head_t close_wait;
/* REVISIT this state ... */
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
@@ -883,7 +884,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
- wake_up(&port->port.close_wait);
+ wake_up(&port->close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}
@@ -1043,6 +1044,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
tty_port_init(&port->port);
spin_lock_init(&port->port_lock);
init_waitqueue_head(&port->drain_wait);
+ init_waitqueue_head(&port->close_wait);
tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
@@ -1073,7 +1075,7 @@ static void gserial_free_port(struct gs_port *port)
{
tasklet_kill(&port->push);
/* wait for old opens to finish */
- wait_event(port->port.close_wait, gs_closed(port));
+ wait_event(port->close_wait, gs_closed(port));
WARN_ON(port->port_usb != NULL);
tty_port_destroy(&port->port);
kfree(port);
diff --git a/include/linux/dma/hsu.h b/include/linux/dma/hsu.h
index 234393a..79df69d 100644
--- a/include/linux/dma/hsu.h
+++ b/include/linux/dma/hsu.h
@@ -35,14 +35,23 @@ struct hsu_dma_chip {
unsigned int length;
unsigned int offset;
struct hsu_dma *hsu;
- struct hsu_dma_platform_data *pdata;
};
+#if IS_ENABLED(CONFIG_HSU_DMA)
/* Export to the internal users */
irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr);
/* Export to the platform drivers */
int hsu_dma_probe(struct hsu_dma_chip *chip);
int hsu_dma_remove(struct hsu_dma_chip *chip);
+#else
+static inline irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip,
+ unsigned short nr)
+{
+ return IRQ_NONE;
+}
+static inline int hsu_dma_probe(struct hsu_dma_chip *chip) { return -ENODEV; }
+static inline int hsu_dma_remove(struct hsu_dma_chip *chip) { return 0; }
+#endif /* CONFIG_HSU_DMA */
#endif /* _DMA_HSU_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 5d0b2a1..90a803a 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -152,9 +152,6 @@ struct r3964_info {
unsigned char *rx_buf; /* ring buffer */
unsigned char *tx_buf;
- wait_queue_head_t read_wait;
- //struct wait_queue *read_wait;
-
struct r3964_block_header *rx_first;
struct r3964_block_header *rx_last;
struct r3964_block_header *tx_first;
@@ -164,8 +161,9 @@ struct r3964_info {
unsigned char last_rx;
unsigned char bcc;
unsigned int blocks_in_rx_queue;
-
-
+
+ struct mutex read_lock; /* serialize r3964_read */
+
struct r3964_client_info *firstClient;
unsigned int state;
unsigned int flags;
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index bdc0ee8..91b16ad 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -19,12 +19,6 @@
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
-/*
- * at91: 6 USARTs and one DBGU port (SAM9260)
- * avr32: 4
- */
-#define ATMEL_MAX_UART 7
-
/* Compact Flash */
struct at91_cf_data {
int irq_pin; /* I/O IRQ */
diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h
index 8a1f6a4..3453fa6 100644
--- a/include/linux/platform_data/dma-hsu.h
+++ b/include/linux/platform_data/dma-hsu.h
@@ -18,8 +18,4 @@ struct hsu_dma_slave {
int chan_id;
};
-struct hsu_dma_platform_data {
- unsigned short nr_channels;
-};
-
#endif /* _PLATFORM_DATA_DMA_HSU_H */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d072ded..5b04b0a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -227,7 +227,6 @@ struct tty_port {
int blocked_open; /* Waiting to open */
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
- wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
unsigned char console:1, /* port is a console */
@@ -424,6 +423,7 @@ extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
const char *routine);
extern const char *tty_name(const struct tty_struct *tty);
extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
+extern int __tty_check_change(struct tty_struct *tty, int sig);
extern int tty_check_change(struct tty_struct *tty);
extern void __stop_tty(struct tty_struct *tty);
extern void stop_tty(struct tty_struct *tty);
@@ -467,6 +467,8 @@ extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
extern void tty_buffer_init(struct tty_port *port);
extern void tty_buffer_set_lock_subclass(struct tty_port *port);
+extern bool tty_buffer_restart_work(struct tty_port *port);
+extern bool tty_buffer_cancel_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
@@ -656,50 +658,6 @@ extern void __lockfunc tty_unlock(struct tty_struct *tty);
extern void __lockfunc tty_lock_slave(struct tty_struct *tty);
extern void __lockfunc tty_unlock_slave(struct tty_struct *tty);
extern void tty_set_lock_subclass(struct tty_struct *tty);
-/*
- * this shall be called only from where BTM is held (like close)
- *
- * We need this to ensure nobody waits for us to finish while we are waiting.
- * Without this we were encountering system stalls.
- *
- * This should be indeed removed with BTM removal later.
- *
- * Locking: BTM required. Nobody is allowed to hold port->mutex.
- */
-static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
- long timeout)
-{
- tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
- tty_wait_until_sent(tty, timeout);
- tty_lock(tty);
-}
-
-/*
- * wait_event_interruptible_tty -- wait for a condition with the tty lock held
- *
- * The condition we are waiting for might take a long time to
- * become true, or might depend on another thread taking the
- * BTM. In either case, we need to drop the BTM to guarantee
- * forward progress. This is a leftover from the conversion
- * from the BKL and should eventually get removed as the BTM
- * falls out of use.
- *
- * Do not use in new code.
- */
-#define wait_event_interruptible_tty(tty, wq, condition) \
-({ \
- int __ret = 0; \
- if (!(condition)) \
- __ret = __wait_event_interruptible_tty(tty, wq, \
- condition); \
- __ret; \
-})
-
-#define __wait_event_interruptible_tty(tty, wq, condition) \
- ___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
- tty_unlock(tty); \
- schedule(); \
- tty_lock(tty))
#ifdef CONFIG_PROC_FS
extern void proc_tty_register_driver(struct tty_driver *);
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 683346d..a423770 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -335,8 +335,7 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
* specified, we cannot return before the IrCOMM link is
* ready
*/
- if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
- (do_clocal || tty_port_carrier_raised(port)) &&
+ if ((do_clocal || tty_port_carrier_raised(port)) &&
self->state == IRCOMM_TTY_READY)
{
break;
@@ -443,34 +442,6 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
/* Not really used by us, but lets do it anyway */
self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
- /*
- * If the port is the middle of closing, bail out now
- */
- if (test_bit(ASYNCB_CLOSING, &self->port.flags)) {
-
- /* Hm, why are we blocking on ASYNC_CLOSING if we
- * do return -EAGAIN/-ERESTARTSYS below anyway?
- * IMHO it's either not needed in the first place
- * or for some reason we need to make sure the async
- * closing has been finished - if so, wouldn't we
- * probably better sleep uninterruptible?
- */
-
- if (wait_event_interruptible(self->port.close_wait,
- !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
- net_warn_ratelimited("%s - got signal while blocking on ASYNC_CLOSING!\n",
- __func__);
- return -ERESTARTSYS;
- }
-
-#ifdef SERIAL_DO_RESTART
- return (self->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
/* Check if this is a "normal" ircomm device, or an irlpt device */
if (self->line < 0x10) {
self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
OpenPOWER on IntegriCloud