summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlex Frid <afrid@nvidia.com>2017-07-25 13:34:12 +0300
committerStephen Boyd <sboyd@codeaurora.org>2017-08-23 16:00:12 -0700
commitf7bdb8b78a3d4b2f0ebd76e606ac6ca2925d7b02 (patch)
treec8c8be7ac2979e5a51a59539b650094e37becdc4
parentac99afe55adf1406e367d229a1c5b2f09818b5a6 (diff)
downloadop-kernel-dev-f7bdb8b78a3d4b2f0ebd76e606ac6ca2925d7b02.zip
op-kernel-dev-f7bdb8b78a3d4b2f0ebd76e606ac6ca2925d7b02.tar.gz
clk: tegra: Update T210 PLLSS (D2/DP) registration
Remove from Tegra210 PLLSS registration code sections that - attempt to set PLL minimum rate (unnecessary, and dangerous if PLL is already enabled on boot) - apply pre-Tegra210 defaults settings - check IDDQ setting (duplicated with Tegra210 PLLSS check defaults) Replaced setting of reference clock with check that default oscillator selection is not changed, and failed registration otherwise as validation was only done with the oscillator as the reference clock. Reordered registration, so that PLL initialization is called after VCOmin adjustment. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-rw-r--r--drivers/clk/tegra/clk-pll.c48
1 files changed, 9 insertions, 39 deletions
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 02f34e6..c6bce4a 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2618,10 +2618,8 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
{
struct tegra_clk_pll *pll;
struct clk *clk, *parent;
- struct tegra_clk_pll_freq_table cfg;
unsigned long parent_rate;
u32 val;
- int i;
if (!pll_params->div_nmp)
return ERR_PTR(-EINVAL);
@@ -2633,13 +2631,11 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
return ERR_PTR(-EINVAL);
}
- pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
- if (IS_ERR(pll))
- return ERR_CAST(pll);
-
- val = pll_readl_base(pll);
- val &= ~PLLSS_REF_SRC_SEL_MASK;
- pll_writel_base(val, pll);
+ val = readl_relaxed(clk_base + pll_params->base_reg);
+ if (val & PLLSS_REF_SRC_SEL_MASK) {
+ WARN(1, "not supported reference clock for %s\n", name);
+ return ERR_PTR(-EINVAL);
+ }
parent_rate = clk_get_rate(parent);
@@ -2649,36 +2645,10 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
pll_params->vco_min = pll_params->adjust_vco(pll_params,
parent_rate);
- /* initialize PLL to minimum rate */
-
- cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
- cfg.n = cfg.m * pll_params->vco_min / parent_rate;
-
- for (i = 0; pll_params->pdiv_tohw[i].pdiv; i++)
- ;
- if (!i) {
- kfree(pll);
- return ERR_PTR(-EINVAL);
- }
-
- cfg.p = pll_params->pdiv_tohw[i-1].hw_val;
-
- _update_pll_mnp(pll, &cfg);
-
- pll_writel_misc(PLLSS_MISC_DEFAULT, pll);
-
- val = pll_readl_base(pll);
- if (val & PLL_BASE_ENABLE) {
- if (val & BIT(pll_params->iddq_bit_idx)) {
- WARN(1, "%s is on but IDDQ set\n", name);
- kfree(pll);
- return ERR_PTR(-EINVAL);
- }
- } else
- val |= BIT(pll_params->iddq_bit_idx);
-
- val &= ~PLLSS_LOCK_OVERRIDE;
- pll_writel_base(val, pll);
+ pll_params->flags |= TEGRA_PLL_BYPASS;
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
&tegra_clk_pll_ops);
OpenPOWER on IntegriCloud