summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2007-11-19 13:47:20 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-11-26 19:40:47 +0000
commitf230d3f53d72d05bcb5666ab7e2eccd49c8b3a15 (patch)
tree0d06454868ca879f06a268de71beb0b1ba6a08d7
parenta95c729b7484d2bbb9ab6beef4865641e73deb99 (diff)
downloadop-kernel-dev-f230d3f53d72d05bcb5666ab7e2eccd49c8b3a15.zip
op-kernel-dev-f230d3f53d72d05bcb5666ab7e2eccd49c8b3a15.tar.gz
[ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio
The AT91 I2C driver is currently marked as "broken" due to hardware issues. This patch enables AT91-based platforms to also use the bitbanged GPIO for I2C. This updates platform setup logic (setting up an i2c-gpio device using the same pins as the i2c-at91 device, unless only the BROKEN driver is enabled). Also make use of the new-style initialization of I2C devices using i2c_register_board_info(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c41
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c42
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c42
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c42
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c43
-rw-r--r--arch/arm/mach-at91/board-carmeva.c2
-rw-r--r--arch/arm/mach-at91/board-csb337.c11
-rw-r--r--arch/arm/mach-at91/board-csb637.c2
-rw-r--r--arch/arm/mach-at91/board-dk.c15
-rw-r--r--arch/arm/mach-at91/board-eb9200.c10
-rw-r--r--arch/arm/mach-at91/board-ek.c2
-rw-r--r--arch/arm/mach-at91/board-kafa.c2
-rw-r--r--arch/arm/mach-at91/board-kb9202.c2
-rw-r--r--arch/arm/mach-at91/board-picotux200.c2
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c2
-rw-r--r--include/asm-arm/arch-at91/board.h3
19 files changed, 233 insertions, 36 deletions
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 0417c16..9296833 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -14,6 +14,7 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
@@ -435,7 +436,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA25,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA26,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91rm9200_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA25, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91rm9200_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -457,7 +491,7 @@ static struct platform_device at91rm9200_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
@@ -466,10 +500,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA26, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91rm9200_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ffd3154..3091bf4 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
@@ -352,7 +353,41 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA23,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA24,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9260_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9260_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -374,7 +409,7 @@ static struct platform_device at91sam9260_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
@@ -383,10 +418,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA24, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9260_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3576595..64979a9 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,7 +14,9 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
@@ -275,7 +277,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9261_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9261_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -297,7 +332,7 @@ static struct platform_device at91sam9261_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
@@ -306,10 +341,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA8, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9261_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index f924bd5..ac329a9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,7 +13,9 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
@@ -421,7 +423,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9263_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9263_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -443,7 +478,7 @@ static struct platform_device at91sam9263_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
@@ -452,10 +487,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PB5, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9263_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index cd7532b..2bd60a3 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -10,8 +10,9 @@
#include <asm/mach/map.h>
#include <linux/platform_device.h>
-#include <linux/fb.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <asm/arch/board.h>
@@ -169,7 +170,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
* TWI (i2c)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PA23,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA24,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9rl_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91sam9rl_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
@@ -191,7 +225,7 @@ static struct platform_device at91sam9rl_twi_device = {
.num_resources = ARRAY_SIZE(twi_resources),
};
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
@@ -200,10 +234,11 @@ void __init at91_add_device_i2c(void)
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA24, 1);
+ i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9rl_twi_device);
}
#else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 76ec856..0f087829 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -128,7 +128,7 @@ static void __init carmeva_board_init(void)
/* USB Device */
at91_add_device_udc(&carmeva_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
/* Compact Flash */
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index dde0899..d0aa20c 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -23,7 +23,6 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
@@ -85,12 +84,12 @@ static struct at91_udc_data __initdata csb337_udc_data = {
};
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
- { I2C_BOARD_INFO("rtc-ds1307", 0x68),
- .type = "ds1307",
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
+ .type = "ds1307",
},
};
-
static struct at91_cf_data __initdata csb337_cf_data = {
/*
* connector P4 on the CSB 337 mates to
@@ -168,9 +167,7 @@ static void __init csb337_board_init(void)
/* USB Device */
at91_add_device_udc(&csb337_udc_data);
/* I2C */
- at91_add_device_i2c();
- i2c_register_board_info(0, csb337_i2c_devices,
- ARRAY_SIZE(csb337_i2c_devices));
+ at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
/* Compact Flash */
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
at91_add_device_cf(&csb337_cf_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 77f04b9..c5c721d 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -129,7 +129,7 @@ static void __init csb637_board_init(void)
/* USB Device */
at91_add_device_udc(&csb637_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NOR flash */
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index af49789..40c9e43 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -124,6 +124,19 @@ static struct spi_board_info dk_spi_devices[] = {
#endif
};
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("x9429", 0x28),
+ },
+ {
+ I2C_BOARD_INFO("at24c", 0x50),
+ .type = "24c1024",
+ }
+};
+
static struct mtd_partition __initdata dk_nand_partition[] = {
{
.name = "NAND Partition 1",
@@ -185,7 +198,7 @@ static void __init dk_board_init(void)
/* Compact Flash */
at91_add_device_cf(&dk_cf_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
/* SPI */
at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 20458b5..b7b79bb 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -91,6 +91,14 @@ static struct at91_mmc_data __initdata eb9200_mmc_data = {
.wire4 = 1,
};
+static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24c", 0x50),
+ .type = "24c512",
+ },
+};
+
+
static void __init eb9200_board_init(void)
{
/* Serial */
@@ -102,7 +110,7 @@ static void __init eb9200_board_init(void)
/* USB Device */
at91_add_device_udc(&eb9200_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
/* Compact Flash */
at91_add_device_cf(&eb9200_cf_data);
/* SPI */
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 322fdd7..d05b1b2 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -145,7 +145,7 @@ static void __init ek_board_init(void)
at91_add_device_udc(&ek_udc_data);
at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index c77d84c..cf1b7b2 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -92,7 +92,7 @@ static void __init kafa_board_init(void)
/* USB Device */
at91_add_device_udc(&kafa_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
}
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 7d9b1a2..4b39b9c 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -124,7 +124,7 @@ static void __init kb9202_board_init(void)
/* MMC */
at91_add_device_mmc(0, &kb9202_mmc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 49cfe7a..6acb55c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -139,7 +139,7 @@ static void __init picotux200_board_init(void)
// at91_add_device_udc(&picotux200_udc_data);
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* SPI */
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 65fa532..b343a6c 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -189,7 +189,7 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 42e172c..b62a5e6 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -406,7 +406,7 @@ static void __init ek_board_init(void)
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* DM9000 ethernet */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2a1cc73..ab9dcc0 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -291,7 +291,7 @@ static void __init ek_board_init(void)
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9b61320..bc0546d 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -181,7 +181,7 @@ static void __init ek_board_init(void)
/* Serial */
at91_add_device_serial();
/* I2C */
- at91_add_device_i2c();
+ at91_add_device_i2c(NULL, 0);
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* SPI */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index c0d7075..7905496 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -33,6 +33,7 @@
#include <linux/mtd/partitions.h>
#include <linux/device.h>
+#include <linux/i2c.h>
#include <linux/spi/spi.h>
/* USB Device */
@@ -94,7 +95,7 @@ struct at91_nand_data {
extern void __init at91_add_device_nand(struct at91_nand_data *data);
/* I2C*/
-extern void __init at91_add_device_i2c(void);
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
OpenPOWER on IntegriCloud