RealView: Move the IRQ_* definitions out of the board-*.h files

The IRQ_* macros need to be made visible via the mach/irqs.h file but
without the additional macros defined in the board-*.h files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

13 files changed, 572 insertions, 461 deletions

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 346cbf0..9ea9c05 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d770..794a8d9 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index e4d0e80..98f8e7e 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -73,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7..f0d68e0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b..4dfc67a 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
index c265093..848bfff 100644
--- a/arch/arm/mach-realview/include/mach/board-pbx.h
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -81,101 +81,6 @@
 #define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
 /*
- * Irqs
- */
-#define IRQ_PBX_GIC_START			32
-
-/* L220
-#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
-*/
-
-/*
- * PB-X on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
-#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
-#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC		-1
-#define IRQ_PBX_SCTL		-1
-
-#define NR_GIC_PBX		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBX
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBX */
-
-/*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
 #define REALVIEW_PBX_PROC_MASK          0xFF000000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 0000000..204d537
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 0000000..2410d4f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 0000000..34e255a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 0000000..86792a9
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 0000000..deaad43
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index e9e3826..78854f2 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,11 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42b..4ce0f98 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
+#include <mach/board-eb.h>
 #include <asm/system.h>
 
 #include "op_counter.h"